Sequential C–O decarboxylative vinylation/C–H arylation of cyclic oxalates via a nickel-catalyzed multicomponent radical cascade

A selective, sequential C–O decarboxylative vinylation/C–H arylation of cyclic alcohol derivatives enabled by visible-light photoredox/nickel dual catalysis is described. This protocol utilizes a multicomponent radical cascade process, i.e. decarboxylative vinylation/1,5-HAT/aryl cross-coupling, to achieve efficient, site-selective dual-functionalization of saturated cyclic hydrocarbons in one single operation. This synergistic protocol provides straightforward access to sp³-enriched scaffolds and an alternative retrosynthetic disconnection to diversely functionalized saturated ring systems from the simple starting materials.

A selective, sequential C–O decarboxylative vinylation/C–H arylation of cyclic alcohol derivatives enabled by visible-light photoredox/nickel dual catalysis has been described.     

1—酰基—4—氯环己烷与取代芳烃的区域与立体选择性反应

从环己烯合成了１－酰基－４－氯环己烷，发现在其在ＡｌＣｌ３催化与苯，氯苯，溴苯等优先生成反式１－芳基－４－酰基环己烷，与联苯反应时选择性较差。     

交联1,4—顺式聚丁二烯的取向结晶

用ＷＡＸＤ和ＳＡＸＳ研究交联１，４－顺式聚丁二烯的取向结晶。结果表明：该试样在拉伸状态时，形成折叠链片晶，而不是伸直链纤维晶。片晶之间断产生新的片晶，使长周期减小，并且片晶的横向尺寸不断增大，由此导致结晶度增大。     

羟丙基醋酸纤维素的合成及其膜的反渗透性

研究了羟丙基纤维素和羟丙基醋酸纤维素的合成。制备羟丙基纤维素的较佳反应温度为40℃左右和2小时或稍长,羟丙基含量随环氧丙烷浓度的增加而增加。在制备羟丙基醋酸纤维素时,随羟丙基含量的增加,所需醋化和水解的时间减少。以甘油-正丙醇或磷酸为添加剂,丙酮为溶剂经30～60s蒸发后制得了羟丙基醋酸纤维素反渗透膜。后者在20kg/cm~2下对氯化钠脱盐率可达95～98％,水通量1.0～2.1mL/cm~2·h,其使用温度上限比醋酸纤维素反渗透膜提高10℃以上。     

Mass spectrometry-based chemical mapping and profiling toward molecular understanding of diseases in precision medicine

Precision medicine has been strongly promoted in recent years. It is used in clinical management for classifying diseases at the molecular level and for selecting the most appropriate drugs or treatments to maximize efficacy and minimize adverse effects. In precision medicine, an in-depth molecular understanding of diseases is of great importance. Therefore, in the last few years, much attention has been given to translating data generated at the molecular level into clinically relevant information. However, current developments in this field lack orderly implementation. For example, high-quality chemical research is not well integrated into clinical practice, especially in the early phase, leading to a lack of understanding in the clinic of the chemistry underlying diseases. In recent years, mass spectrometry (MS) has enabled significant innovations and advances in chemical research. As reported, this technique has shown promise in chemical mapping and profiling for answering “what”, “where”, “how many” and “whose” chemicals underlie the clinical phenotypes, which are assessed by biochemical profiling, MS imaging, molecular targeting and probing, biomarker grading disease classification, etc. These features can potentially enhance the precision of disease diagnosis, monitoring and treatment and thus further transform medicine. For instance, comprehensive MS-based biochemical profiling of ovarian tumors was performed, and the results revealed a number of molecular insights into the pathways and processes that drive ovarian cancer biology and the ways that these pathways are altered in correspondence with clinical phenotypes. Another study demonstrated that quantitative biomarker mapping can be predictive of responses to immunotherapy and of survival in the supposedly homogeneous group of breast cancer patients, allowing for stratification of patients. In this context, our article attempts to provide an overview of MS-based chemical mapping and profiling, and a perspective on their clinical utility to improve the molecular understanding of diseases for advancing precision medicine.

An overview of MS-based chemical mapping and profiling, indicating its contributions to the molecular understanding of diseases in precision medicine by answering "what", "where", "how many" and "whose” chemicals underlying clinical phenotypes.     

Improvement on Simultaneous Determination of Cr(III) and Cr(VI) by Capillary Electrophoresis and Chemiluminescence Detection

Chromiumexistsindifferentoxidationstatesingroundwater,industrialwastewater,seawater,andsoilofourenvironment1,2.Chromium(III)isanessentialtraceelementforhumans,requiredforthemaintenanceofnormalglucose,cholesterol,andfattyacidmetabolism.Ontheotherhand,watersolublechromium(VI),intheformCr2O72-orCrO42-,ishighlyirritatingandtoxictohumansandanimals3.Itsacutetoxiceffectsincludeanimmediatecardiovascularshockandlatereffectsonkidney,liver,andblood-formingorgans.Therefore,itisnecessaryforriskassessme…     

Effect of additives on the stereochemical integrity and reactivity of alpha-alkoxycarbonyl alkenylcopper intermediates. Optimal conditions for the synthesis of isomerically pure tetrasubstituted alkenes

A systematic study on the effect of additives on the isomerizability of 1-alkoxycarbonyl alkenylcopper(I) intermediates revealed that the lithium chelator 12-crown-4 is significantly more efficient than HMPA at retarding isomerization. On the other hand, 12-crown-4 alone is unable to promote effective coupling with alkyl halides. The combination of 12-crown-4 and a reduced amount of HMPA, however, led to an improved procedure for the preparation of useful, isomerically pure tetrasubstituted alkenes such as allylation reagents and skipped dienes.     

Viscometric study of poly(vinyl chloride)/poly(vinyl acetate) blends in various solvents

The intermolecular interactions between poly(vinyl chloride) (PVC) and poly(vinyl acetate) (PVAc) in tetrahydrofuran (THF), methyl ethyl ketone (MEK) and N,N^′-dimethylformamide (DMF) were thoroughly investigated by the viscosity measurement. It has been found that the solvent selected has a great influence upon the polymer-polymer interactions in solution. If using PVAc and THF, or PVAc and DMF to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+THF) or (PVAc+DMF) is less than in corresponding pure solvent of THF or DMF. On the contrary, if using PVAc and MEK to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+MEK) is larger than in pure solvent of MEK. The influence of solvent upon the polymer-polymer interactions also comes from the interaction parameter term Δb, developed from modified Krigbaum and Wall theory. If PVC/PVAc blends with the weight ratio of 1/1 was dissolved in THF or DMF, Δb<0. On the contrary, if PVC/PVAc blends with the same weight ratio was dissolved in MEK, Δb>0. These experimental results show that the compatibility of PVC/PVAc blends is greatly associated with the solvent from which polymer mixtures were cast. The agreement of these results with differential scanning calorimetry measurements of PVC/PVAc blends casting from different solvents is good.     

A new oxamato-bridged heterotrinuclear NiCuNi complex with irregular spin state structure: Synthesis, spectroscopy, crystal structure and magnetism

A new oxamato-bridged Ni^IICu^IINi^II species, [Ni(tacn)(H₂O)]₂[μ-Cu(pba)](ClO₄)₂·6H₂O 1, (tacn=1,4,7-triazacyclononane; pba=1,3-propylenebis(oxamato)) has been synthesized and structurally as well as magnetically characterized. Complex 1 has a discrete trinuclear Ni^IICu^IINi^II structure: Two nickel(II) ions are bridged by [Cu(pba)]²⁻ anion, macrocyclic ligand tacn works as terminal ligand of the nickel(II) center. The magnetic data of compound 1 was analyzed by means of

leading to g_Cu=2.19, g_Ni=2.18, J=−112.8 cm⁻¹, D=±4.31 cm⁻¹. The parameters are compared with the similar complexes and the irregular spin state structure of complex 1 is also described here.     

Influences of permeation of vanadium ions through PVDF-g-PSSA membranes on performances of vanadium redox flow batteries

The preparation and physical characterization of a poly(vinylidene fluoride)-graft-poly(styrene sulfonic acid) (PVDF-g-PSSA) membrane prepared by a solution-grafting method were described. These membranes exhibited high conductivity with a value 3.22 x 10(-2) S/cm at 30 degrees C. ICP studies revealed that the PVDF-g-PSSA membrane showed dramatically lower vanadium ion permeability compared to Nafion 117. Trivalent vanadium ions had the highest permeability through all these membranes in contrast to pentavalent vanadium ions with the lowest. The VRB with the low-cost PVDF-g-PSSA membrane exhibited a higher performance than that with Nafion 117 under the same operating conditions, and its energy efficiency reached 75.8% at 30 mA/cm(2). The performance of VRB with the PVDF-g-PSSA membrane can be maintained after more than 200 cycles at a current density of 60 mA/cm(2).