循环流化床(CFB)煤/焦气化反应的研究 Ⅰ.操作气速、固体循环速率对循环流化床气化反应的影响

报道了山西西山焦煤飞灰，在小型循环流化床气化反应器上，以二氧化碳为气化介质，在不同操作条件下（气速、固体循环速率）的气化反应。研究结果表明，ＣＯ出口浓度及碳转化率随着ＣＦＢ操作气速减小、固体颗粒循环速率的增加而增加。即在ＣＦＢ床中，提高气体、固体停留时间（床内固体颗粒浓度）有利于ＣＦＢ气化的进行。ＣＯ浓度及碳转化率沿床高的变化趋势与床内颗粒浓度分布一致。     

A class of general systems of KdV type I

We consider some wide class of general systems of Korteweg-de Vries equations which contain nonlinear terms with derivatives of higher order, we have proved the existence of generalized solution for this system and the asymptotic behavior ast and blow up property of the solution are discussed.     

羧基丙烯酸酯涂料合成及其防雾性能研究

采用种子乳液聚合法合成了一种互穿网络型羧基丙烯酸酯类聚物乳液，研究了加料方式对羧基分布的影响，结果表明丙烯酸加入到核单体中有利于羧基分布在乳胶粒表面。在体系中引入离子键交联结构提高了乳液涂料的硬度和耐水性能，离子键交联ＰＩＬＮ型涂料具有优良的防雾性能。     

The preparation of a new polysiloxane copolymer with glucosylthioureylene groups on the side chains

A new polysiloxane with pendent sugar units was prepared by a two-step method: the preparation of the polysiloxane with amino groups on the side chain and then the copolysiloxane reacted with glucosyl isothiocyanate. All polymers were characterized by FT-IR 1H-NMR, 1H-1H-COSY, 13C-NMR, and DEPT respectively. In the same time, Platinum oxide was found to be a versatile and powerful hydrosilation catalyst in the hydrosilylation reaction of aminotrimethylenepolysiloxanes with heptamethylcyclotetrasiloxane (D₄^H).     

Direct electrochemical redox of tyrosinase at silver electrodes

The direct electron transfer reactions between tyrosinase and silver electrode were investigated by using cyclic voltammetry and potential-step chronoamperometry as well as current-step chronopotentiometry techniques. The kinetics of these reactions is quasi-reversible with two electron transfer reactions and 0.030 s(-1) apparent electrode reaction rate constant. The results demonstrate that neither electrode surface modification nor the inclusion of mediators is necessary to study the electron transfer reactions of tyrosinase at silver electrodes. Moreover, both the anodic and the cathodic currents are linear relationship with the tyrosinase concentration in the range of 1 x 10(-9) approximately 5 x 10(-8)moll(-1). It is possible to be used as a method of analyzing tyrosinase concentration.     

Ultraviolet photodissociation dynamics of the SH radical

Ultraviolet (UV) photodissociation dynamics of jet-cooled SH radical (in X 2pi(3/2), nu"=0-2) is studied in the photolysis wavelength region of 216-232 nm using high-n Rydberg atom time-of-flight technique. In this wavelength region, anisotropy beta parameter of the H-atom product is approximately -1, and spin-orbit branching fractions of the S(3P(J)) product are close to S(3P2):S(3P1):S(3P0)=0.51:0.36:0.13. The UV photolysis of SH is via a direct dissociation and is initiated on the repulsive 2sigma- potential-energy curve in the Franck-Condon region after the perpendicular transition 2sigma(-)-X 2pi. The S(3P(J)) product fine-structure state distribution approaches that in the sudden limit dissociation on the single repulsive 2sigma- state, but it is also affected by the nonadiabatic couplings among the repulsive 4sigma-, 2sigma-, and 4pi states, which redistribute the photodissociation flux from the initially excited 2sigma- state to the 4sigma- and 4pi states. The bond dissociation energy D0(S-H)=29,245+/-25 cm(-1) is obtained.     

Homolysis of the Ln-N (Ln = Yb, Eu) bond. Synthesis, structural characterization and catalytic activity of ytterbium(II) and europium(II) complexes with methoxyethyl functionalized indenyl ligands

The interaction of methoxyethyl functionalized indene compounds (C(9)H(6)-1-R-3-CH(2)CH(2)OMe, R =t-BuNHSiMe(2)(1), Me(3)Si (2), H (3)) with [(Me(3)Si)(2)N](3)Ln(mu-Cl)Li(THF)(3)(Ln=Yb (4), Eu (5)) produced a series of new ytterbium(II) and europium(II) complexes via tandem silylamine elimination/homolysis of the Ln-N (Ln=Yb, Eu) bond. Treatment of the lanthanide(III) amides [(Me(3)Si)(2)N](3)Ln(mu-Cl)Li(THF)(3)(Ln=Yb (4), Eu (5) with 2 equiv. of, 1,2 and 3, respectively, produced, after workup, the ytterbium(II) complexes [eta5:eta1-Me(2)Si(MeOCH(2)CH(2)C(9)H(5))(NHBu-t)](2)Yb(II) (6), (eta5:eta1-MeOCH(2)CH(2)C(9)H(5)SiMe(3))(2)Yb(II) (7), (eta5:eta1-MeOCH(2)CH(2)C(9)H(6))(2)Yb(II)(8) and the corresponding europium(II) complexes [eta5:eta1-Me(2)Si(MeOCH(2)CH(2)C(9)H(5))(NHBu-t)](2)Eu(II)(9), (eta5:eta1-MeOCH(2)CH(2)C(9)H(5)SiMe(3))(2)Eu(II)(10) and (eta5:eta1-MeOCH(2)CH(2)C(9)H(6))(2)Eu(II)(11) in moderate to good yield. In contrast, interaction of the corresponding indene compounds 1, 2 or 3 with the lanthanide amides [(Me(3)Si)(2)N](3)Ln (Ln = Yb, Eu) was not observed, while addition of 0.5 equiv. of anhydrous LiCl to the corresponding reaction mixture produced, after workup, the corresponding ytterbium(II) or europium(II) complexes. All the new compounds were fully characterized by spectroscopic and elemental analyses. The structures of complexes, and were determined by single-crystal X-ray analyses. The catalytic activity of all the ytterbium(II) and europium(II) complexes on MMA polymerization was examined. It was found that all the ytterbium(II) and europium(II) complexes can function as single-component MMA polymerization catalysts. The temperature, solvent and ligand effects on the catalytic activity were studied.     

Interaction of Fluorocarbon Containing Hydrophobically Mdified Polyelectrolyte with Nonionic Surfactants

The interaction of fluorocarbon containing hydrophobically modified polyelectrolyte(FMPAANa) with two kinds of nonionic surfactants(hydrogenated and fluorinated)in a semidilute (0.5wt%) aqueous solution had been studied by rheological measurements,Association behavior was found in both systems.The hydrophobic interaction of FMPAANa with fluorinated surfactant(FC171) is much stronger than that with hydrogenated surfactant(NP7.5) at low surfactoant concentrations.The interaction is strengthened by surfactants being added for the density of active junctions increased.Whereas distinct phenomena for FC171 and NP7.5 start to be found as the surfactants added over their respective certain concentration.The interaction of polyelectrolyte with fluorinated surfactant increases dramatical ly while that with hydrogenated surfactant decreases.     

Single-walled carbon nanotube-based coaxial nanowires: synthesis, characterization, and electrical properties

We report herein the template-directed synthesis, characterization, and electric properties of single-walled carbon nanotube- (SWNT-) based coaxial nanowires, that is, core (SWNT)-shell (conducting polypyrrole and polyaniline) nanowires. The SWNTs were first dispersed in aqueous solutions containing cationic surfactant cetyltrimethylammonium bromide (CTAB) or nonionic surfactant poly(ethylene glycol) mono-p-nonyl phenyl ether (O pi-10). Each individual nanotube (or small bundle) was then encased in its own micellelike envelope with hydrophobic surfactant groups orientated toward the nanotube and hydrophilic groups orientated toward the solution. And thus a hydrophobic region within the micelle/SWNT (called a micelle/SWNT hybrid template) was formed. Insertion and growth of pyrrole or aniline monomers in this hybrid template, upon removal of the surfactant, produce coaxial structures with a SWNT center and conducting polypyrrole or polyaniline coating. Raman and Fourier transform infrared (FTIR) spectroscopy and scanning (SEM) and transmission (TEM) electron microscopy were used to characterize the composition and the structures of these coaxial nanowires. The results revealed that the micellar molecules used could affect the surface morphologies of the resulting coaxial nanowires but not the molecular structures of the corresponding conducting polymers. Electric properties testing indicated that the SWNTs played the key roles in the conducting polymer/SWNT composites during electron transfer in the temperature range 77 K to room temperature. Compared with the SWNT network embedded in the conducting polymers, the composites within which SWNTs were coated perfectly by the identical conducting polymers exhibited higher barrier heights during electron transfer.     

BLUE LIGHT-EMITTING COIL-ROD-COIL BLOCK OLIGOMERS WITH RIGID p-HEXAPHENYL AS CHROMOPHORE

The synthesis and characterization of coil-rod-coil triblock oligomers, poly（ethylene oxide）-b-p-hexaphenyl-b- poly（ethylene oxide）, are described. The number of repeating ethylene oxide units in each flexible block are 3 （EO3-PHP- EO3）, 8 （EOs-PHP-EO8）, 13 （EO13-PHP-EO13）, and 17 （EO17-PHP-EO17）, respectively. The structures of these oligomers are confirmed by ^1H-NMR, 13C-NMR, EA, and MALDI-TOF mass spectrometry. The introduction of soluble poly（ethylene oxide） coils to the rigid p-hexaphenyl segment significantly improves the solubility of the oligomers, so they can form smooth thin films by spin-coating from their solutions. The oligomers are quite thermally stable and have 1% weight loss temperatures at above 340℃ under nitrogen. They can emit strong blue light in both solution and film state, and have fluorescence quantum yields of about 40% in chloroform. They are expected to have potential applications in optoelectronic devices.