压电石英晶体在电解质水溶液中的振荡性能研究(Ⅱ)——频率、频移特性

根据两面电极浸入液体中的压电晶体等效电路模型和Pierce振荡器振荡方程的解,得到晶体在电解质溶液中的振荡频率(F_1)与溶液电导率(x)的关系式:F_1=(1/2π)(1/C_1+1/C_2)(1/X_e)[(R_e~2+X_e~2)x~2+2R_ex+1]。以自行设计的Pierce晶体振荡器。研究了晶体和主振电路参数、输入电压及检测池外壳屏蔽接地对AT切9MHz石英晶体在KCl、Na_2SO_4水溶液中的频率、相对于纯水频移随溶液电导率变化的影响规律,结果与上式相符。     

A note on approximate controllability for semilinear one-dimensional heat equation

The one-dimensional semilinear heat equation is considered. It is shown that if the nonlinear functionF(y) is uniformly bounded then the system is approximately controllable for every given terminal timeT>0 under some ordinary condition onb. The results may be extended to the general one-dimensional semilinear heat equation with one-dimensional control or to a boundary control heat system with semilinear boundary condition.     

研究塑性有机固体的1H NMR方法

塑性有机固体的＾１Ｈ ＭＡＳ ＮＭＲ谱通常由一高分辨谱与一宽线谱组成，其中高分辨谱分量对应于塑性相，而宽线谱分量对应于刚性相。长延迟回波－ＭＡＳ ＮＭＲ实验可测得塑性相的高分辨谱，ＣＲＡＭＰＳ方法可测得整个固体＾１Ｈ体系的高分辨谱，常温下它往往以刚性相的贡献为主要成分。实验结果表明，结合＾１Ｈ ＭＡＳ、回波－ＭＡＳ与ＣＲＡＭＰＳ等三种固态高分辨＾１Ｈ ＮＭＲ技术可望成为深入研究塑性有机固体中塑性相     

Mechanical and thermal properties of poly-ether ether ketone reinforced with CaCO3

CaCO₃/PEEK (poly-ether ether ketone) composites were prepared on a twin-screw extruder with different mass ratio of CaCO₃/PEEK from 0% to 30%. Four types of particles were used as filler in PEEK matrix. The influence of surface treatment with sulfonated PEEK (SPEEK) of the particles on the mechanical and thermal properties of the composites was studied. The experiments included tensile tests, flexural tests, notched Izod impact tests, TGA, DSC and SEM. The modulus and yield stress of the composites increased with CaCO₃ particles loadings. This increase was attributed to the bonding between the particles and the PEEK matrix, as can be proved by the SEM pictures of tensile fracture surface of the composites. The impact strength of the composites was modified by the SPEEK coated on the CaCO₃ particle surface. DSC experiments showed that the particle content and surface properties influenced the glass transition temperature (T_g) and melting temperature (T_m) of the composites. The T_g increased with the content of fillers while T_m decreased. In this study the fillers treated were found to give better combination properties, which indicated that SPEEK played a constructive role in the CaCO₃/PEEK composites.     

GRAFTING OF ETHYLENE GLYCOL DIMETHACRYLATE ONTO SILK IN AQUEOUS ALCOHOLIC SOLUTION

The grafting of ethylene glycol dimethacrylate (EGDMA) onto silk in aqueous alcohol systems using potassiumpersulfate (KPS) in the presence of air was investigated. Effects of grafting conditions, such as concentrations of monomer,initiator and formic acid, temperature and time, on the graft yield were determined. The optimum graft conditions were foundto be: T = 80℃, t = 30 min, [KPS] = 1.85% [on the weight ofmonomer (owm)]; [formic acid] = 0.2% (V/V); [EGDMA] =80% [on the weight of fiber (owf)]. The activation energy of grafting at 50-80℃ was found to be 71.31 kJ/mol for EGDMA.Grafting equations were also evaluated. The graft yield value can be regulated by the concentration of monomer. The graftcopolymerization of EGDMA onto silk is effective in improving the crease-proofing of silk fabrics.     

Amperometric determination of 6-mercaptopurine on functionalized multi-wall carbon nanotubes modified electrode by liquid chromatography coupled with microdialysis and its application to pharmacokinetics in rabbit

In this paper, multi-wall carbon nanotubes fuctionalized with carboxylic groups modified electrode (MWNT-COOH CME) was fabricated. This chemically modified electrode (CME) can be used as the working electrode in the liquid chromatography for the determination of 6-mercaptopurine (6-MP). The results indicate that the CME exhibits efficiently electrocatalytic oxidation for 6-MP with relatively high sensitivity, stability and long-life. The peak currents of 6-MP are linear to its concentrations ranging from 4.0×10⁻⁷ to 1.0×10⁻⁴ mol l⁻¹ with the calculated detection limit (S/N=3) of 2.0×10⁻⁷ mol l⁻¹. Coupled with microdialysis, the method has been successfully applied to the pharmacokinetic study of 6-MP in rabbit blood. This method provides a fast, sensible and simple technique for the pharmacokinetic study of 6-MP in vivo.     

Effect of γ-radiation on ointment cold cream

In this paper, Co-60γ ray was used to irradiate the ointment cold cream at room temperature (25°C). We also used FTIR, GC and thin film chromatogram to analyse various irradiated samples. It was found that the ointment cold cream can be irradiated at dose of 5–35 kGy and at dose rate from 0.2 to 0.6 kGy/h at room temperature (25°C) without evident decomposition. At dose of 5–15 kGy, the number of bacteria can be reduced to hygienic standard value. The radiation sterilization is a safe method for killing the bacteria in the ointment cold cream.     

A dual-electrode approach for highly selective detection of glucose based on diffusion layer theory: experiments and simulation

A dual-electrode configuration for the highly selective detection of glucose in the diffusion layer of the substrate electrode is presented. In this approach, a glassy carbon electrode (GCE, substrate) modified with a conductive layer of glucose oxidase/Nafion/graphite (GNG) was used to create an interference-free region in its diffusion layer by electrochemical depletion of interfering electroactive species. A Pt microelectrode (tip, 5 microm in radius) was located in the diffusion layer of the GNG-modified GCE (GNG-G) with the help of scanning electrochemical microscopy. Consequently, the tip of the electrode could sense glucose selectively by detecting the amount of hydrogen peroxide (H2O2) formed from the oxidization of glucose on the glucose oxidase layer. The influences of parameters, including tip-substrate distance, substrate potential, and electrolyzing time, on the interference-removing efficiency of this dual-electrode approach have been investigated systematically. When the electrolyzing time was 30 s, the tip-substrate distance was 1.8 a (9.0 microm) (where a is the radius of the tip electrode), the potentials of the tip and substrate electrodes were 0.7 V and 0.4 V, respectively, and a mixture of ascorbic acid (0.3 mM), uric acid (0.3 mM), and 4-acetaminophen (0.3 mM) had no influence on the glucose detection. In addition, the current-time responses of the tip electrode at different tip-substrate distances in a solution containing interfering species were numerically simulated. The results from the simulation are in good agreement with the experimental data. This research provides a concept of detection in the diffusion layer of a substrate electrode, as an interference-free region, for developing novel microelectrochemical devices.     

Microwave-assisted extraction followed by gas chromatography-mass spectrometry for the determination of endocrine disrupting chemicals in river sediments

A method for the simultaneous measurement of trace amounts of phenolic xenoestrogens, such as 2,4-dichlorophenol (2,4-DCP), 4-tert-butyl-phenol (BP), 4-tert-octylphenol (OP), 4-nonylphenol (NP), pentachlorophenol (PCP) and bisphenol A (BPA), in water samples was developed using stir bar sorptive extraction (SBSE) with in situ derivatization followed by thermal desorption (TD)-gas chromatography-mass spectrometry (GC-MS) analysis. The conditions for derivatization with acetic acid anhydride were investigated. A polydimethylsiloxane (PDMS)-coated stir bar and derivatization reagents were added to 10 ml of water sample and stirring was commenced for 10-180 min at room temperature (25 degrees C) in a headspace vial. Then, the extract was analyzed by TD-GC-MS. The optimum time for SBSE with in situ derivatization was 90 min. The detection limits of 2,4-DCP, BP, OP, NP, PCP and BPA were 2, 1, 0.5, 5, 2 and 2 pg ml(-1), respectively. The method showed good linearity over the concentration ranges of 10, 5, 2, 20, 10 and 10-1000 pg ml(-1) for 2,4-DCP, BP, OP, NP, PCP and BPA, respectively, and the correlation coefficients were higher than 0.99. The average recoveries of those compounds in river water samples were equal to or higher than 93.9% (R.S.D. <7.2%) with correction using the added surrogate standards. This simple, accurate, sensitive and selective method can be used in the determination of trace amounts of phenolic xenoestrogens in river water samples.