中药微量元素数据（16）

＂中药微量元素数据＂分为植物药、动物药、生物甲壳药、矿物药和中成药刊出,其中又细分为解表药、泻下药、清热药、利水渗湿药、祛风湿药、温里祛寒药、芳香化湿药、理气药、理血药、补养药、固涩药、化痰止咳药、消导药、熄风镇痛药、养心安神药、芳香开窍药、外用药、驱虫药、各类中药煎煮液。 检测的中药747种,共6 780味。每种药包括药名、学名、科属、部位、产地、元素含量、分析方法和文献来源等8个内容。以表格形式表示。每味药物最多测定38种元素,最少测定4种元素,平均测定17种元素,共展示出的元素数据约12万个。 每一个数据含义非常深刻,如序号为113的黄芩,共测定河北、山西、辽宁、黑龙江、山东、云南、四川、河南、吉林、陕西、甘肃、内蒙古、江苏等50个不同产地黄芩中的20种元素。又如序号为114的猕猴桃,共测定其中花、果、叶、枝、茎、根、皮、汁等8个不同部位中的23种元素。从元素的角度去研究中药不同产地、不同部位的药用功效,很有科研价值和实用意义。还可以用模式识别法去研究微量元素与中药的解表、清热、理气、理血等药性的关系,指导合理用药和配伍,深入研究中药与元素数据的关系,可以发现其中许多意想不到的科学规律。 ＂数据＂所参考的1 036条文献,全是公开发表的论文和专著,是中国科研人员使用34种先进的分析测试方法所得的分析测试数据,是研究课题的＂数据＂,有高度的可靠性。对中药进行＂解剖＂测试,不但测定其＂全身＂中的元素,还测定其不同＂器官＂中的元素含量,如人参,既测定全参,又测定人参子、人参叶、人参皮、人参花、人参芦、人参茎、人参果、人参须等8个不同部位的元素含量,用元素功能指导临床用药很有帮助,甚至有些可用替代药,而且用中药治疗的阴虚、阳虚?     

表面活性剂辅助共沉淀法制备Ni-Mg-Al固体碱催化剂用于CH_4-CO_2重整反应

采用表面活性剂辅助共沉淀法制备了Ni-Mg-Al固体碱催化剂并用于CH4-CO2重整反应,探讨了表面活性剂对Ni(111),Ni(200)晶面的择优取向作用,在800℃下比较了不同表面活性剂制备的催化剂的催化性能,详细考察了CTAB制备的催化剂CB-LDO在不同反应温度下的催化活性和稳定性.采用红外光谱、X射线衍射、程序升温还原、X射线光电子能谱、高分辨透射电镜和程序升温氧化等表征手段分析了催化剂的活性、稳定性和失活原因.结果表明,四丙基氢氧化铵(TPAOH)促进Ni(200)的生长,而聚氧乙烯-聚氧丙烯-聚氧乙烯(P123)、聚乙烯吡咯烷酮(PVP)和十六烷基三甲基溴化铵(CTAB)抑制Ni(200)晶面的生长;Ni(200)的结晶程度对CH4的活化起到关键的作用,催化剂CB-LDO在高温下反应会发生晶型的转化,Ni(200)晶面由于反应过程中生成NiAl2O4尖晶石而得到缓慢释放,使催化剂的活性得以维持较高的水平.     

Alumina nanofibers obtained via electrospinning of pseudo-boehmite sol/PVP solution

Alumina nanofibers were fabricated by calcination of the polyvinylpyrrolidone (PVP)/pseudo-boehmite nanocomposite precursor fibers formed by electrospinning PVP/ethanol solution of dispersed pseudo-boehmite nanoparticles with and without additive of silica. The evolution of the phase, mechanical property and morphological features of the calcined fibers were studied and the effect of adding SiO₂ on the phase transformation of alumina was discussed. Adding SiO₂ can retard the phase transformation of γ-Al₂O₃ to α-Al₂O₃ and therefore inhibit the growth of alumina grains during calcination. Upon calcining the precursor fibers with 4 wt% SiO₂ additive at 1,300 °C, continuous alumina nanofibers with diameter ranging from 300 to 800 nm were obtained. These continuous nanofibers exhibited good flexibility and could be very promising for applications in filtration and catalyst support.     

ZIF-Induced d-Band Modification in a Bimetallic Nanocatalyst: Achieving Over 44 % Efficiency in the Ambient Nitrogen Reduction Reaction

The electrochemical nitrogen reduction reaction (NRR) offers a sustainable solution towards ammonia production but suffers poor reaction performance owing to preferential catalyst–H formation and the consequential hydrogen evolution reaction (HER). Now, the Pt/Au electrocatalyst d-band structure is electronically modified using zeolitic imidazole framework (ZIF) to achieve a Faradaic efficiency (FE) of >44 % with high ammonia yield rate of >161 μg mg_cat⁻¹ h⁻¹ under ambient conditions. The strategy lowers electrocatalyst d-band position to weaken H adsorption and concurrently creates electron-deficient sites to kinetically drive NRR by promoting catalyst–N₂ interaction. The ZIF coating on the electrocatalyst doubles as a hydrophobic layer to suppress HER, further improving FE by >44-fold compared to without ZIF (ca. 1 %). The Pt/Au-N_ZIF interaction is key to enable strong N₂ adsorption over H atom.     

Radical Acylfluoroalkylation of Olefins through N-Heterocyclic Carbene Organocatalysis

Fluorinated ketones are widely prevalent in numerous biologically interesting molecules, and the development of novel transformations to access these structures is an important task in organic synthesis. Herein, we report the multicomponent radical acylfluoroalkylation of a variety of olefins in the presence of various commercially available aromatic aldehydes and fluoroalkyl reagents through N-heterocyclic carbene organocatalysis. With this protocol, over 120 examples of functionalized ketones with diverse fluorine substituents have been synthesized in up to 99 % yield with complete regioselectivity. The generality of this catalytic strategy was further highlighted by its successful application in the late-stage functionalization of pharmaceutical skeletons. Excellent diastereoselectivity could be achieved in the reactions forging multiple stereocenters. In addition, preliminary results have been achieved on the catalytic asymmetric variant of the olefin difunctionalization process.     

La3B6O13(OH): The First Acentric High-Pressure Borate Displaying Edge-Sharing BO4 Tetrahedra

La₃B₆O₁₃(OH) was obtained by a high-pressure/high-temperature experiment at 6 GPa and 1673 K. The compound crystallizes in the space group P2₁ (no. 4) with the lattice parameters a=4.785(2), b=12.880(4), c=7.433(3) Å, and β=90.36(10)°, and is built up of corner- as well as edge-sharing BO₄ tetrahedra. It represents the first acentric high-pressure borate containing these B₂O₆ entities. The compound develops borate layers of „sechser“-rings with the La³⁺ cations positioned between the layers. Single-crystal and powder X-ray diffraction, vibrational and MAS NMR spectroscopy, second-harmonic generation (SHG) and thermoanalytical measurements, as well as computational methods were used to affirm the proposed structure and the B₂O₆ entities.     

De Novo Construction of Catenanes with Dissymmetric Cages by Space‐Discriminative Post‐Assembly Modification

Considerable efforts have been made to increase the topological complexity of mechanically interlocked molecules over the years. Three‐dimensional catenated structures composed of two or several (usually symmetrical) cages are one representative example. However, owing to the lack of an efficient universal synthetic strategy, interlocked structures made up of dissymmetric cages are relatively rare. Since the space volume of the inner cavity of an interlocked structure is smaller than that outside it, we developed a novel synthetic approach with the voluminous reductant NaBH(OAc)₃ that discriminates this space difference, and therefore selectively reduces the outer surface of a catenated dimer composed of two symmetric cages, thus yielding the corresponding catenane with dissymmetric cages. Insight into the template effect that facilitates the catenation of cages was provided by computational and experimental techniques.     

Room‐Temperature Ferroelectric Material Composed of a Two‐Dimensional Metal Halide Double Perovskite for X‐ray Detection

Although two‐dimensional (2D) metal–halide double perovskites display versatile physical properties due to their huge structural compatibility, room‐temperature ferroelectric behavior has not yet been reported for this fascinating family. Here, we designed a room‐temperature ferroelectric material composed of 2D halide double perovskites, (chloropropylammonium)₄AgBiBr₈, using an organic asymmetric dipolar ligand. It exhibits concrete ferroelectricity, including a Curie temperature of 305 K and a notable spontaneous polarization of ≈3.2 μC cm^?2, triggered by dynamic ordering of the organic cation and the tilting motion of heterometallic AgBr₆/BiBr₆ octahedra. Besides, the alternating array of inorganic perovskite sheets and organic cations endows large mobility‐lifetime product (μτ=1.0×10^?3 cm² V^?1) for detecting X‐ray photons, which is almost tenfold higher than that of CH₃NH₃PbI₃ wafers. As far as we know, this is the first study on an X‐ray‐sensitive ferroelectric material composed of 2D halide double perovskites. Our findings afford a promising platform for exploring new ferroelectric materials toward further device applications.     

A Hybrid Method Using HAVOK Analysis and Machine Learning for Predicting Chaotic Time Series

The prediction of chaotic time series systems has remained a challenging problem in recent decades. A hybrid method using Hankel Alternative View Of Koopman (HAVOK) analysis and machine learning (HAVOK-ML) is developed to predict chaotic time series. HAVOK-ML simulates the time series by reconstructing a closed linear model so as to achieve the purpose of prediction. It decomposes chaotic dynamics into intermittently forced linear systems by HAVOK analysis and estimates the external intermittently forcing term using machine learning. The prediction performance evaluations confirm that the proposed method has superior forecasting skills compared with existing prediction methods.     

一种双向、数字式微型无线内窥镜系统设计

通过分析目前消化道无线内窥镜的发展状况,提出了一种全新的双向、数字化的微型无线内窥镜系统方案设计,该系统具有实时观察病人图像、全消化道检查以及提供三维深度图像数据等功能,并对方案中各硬件模块及其关键技术进行了详细的论述,设计了该系统的FPGA验证环境,验证了整个方案的正确性。系统胶囊内的数模混合芯片已采用0.18μm CMOS工艺流片。