Review of roll-to-roll fabrication techniques for colloidal quantum dot solar cells

Colloidal quantum dots (CQDs) are of great interest to photovoltaic (PV) technologies as they possess the benefits of solution-processability, size-tunability, and roll-to-roll manufacturability, as well as unique capabilities to harvest near-infrared (NIR) radiation. During the last decade, lab-scale CQD solar cells have achieved rapid improvement in the power conversion efficiency (PCE) from ~1% to 18%, which will potentially exceed 20% in the next few years and approach the performance of other PV technologies, such as perovskite solar cells and organic solar cells. In the meanwhile, CQD solar cells exhibit long lifetimes either under shelf storage or continuous operation, making them highly attractive to industry. However, in order to meet the industrial requirements, mass production techniques are necessary to scale up the fabrication of those lab devices into large-area PV modules, such as roll-to-toll coating. This paper reviews the recent developments of large-area CQD solar cells with a focus on various fabrication methods and their principles. It covers the progress of typical large-area coating techniques, including spray coating, blade coating, dip coating, and slot-die coating. It also discusses next steps and new strategies to accomplish the ultimate goal of the low-cost large-area fabrication of CQD solar cells and emphasizes how artificial intelligence or machine learning could facilitate the developments of CQD solar cell research.     

计算机专用实时母系统在VAX／VMS环境下的实现

“母系统—子系统”的工作方式是计算机专用实时系统研制中的一次重要尝试,本文闸明计算机专用实时母系统在VAX/VMS环境下的工程实现。     

反相微乳液法制备棒状羟基磷灰石纳米粒子

在(Tritonx-100 Tween 80)，环己烷，(正己醇 正丁醇)，0．5mol／L Ca(NO3)2水溶液反相微乳液体系中，采用滴加0．3mol／L(NH4)2HPO4水溶液的加料方式成功制备出直径在20～25nm，长度在28～64nm的棒状羟基磷灰石纳米粒子。通过对(Triton X-100 Tween 80)，环己烷，(正己醇 正丁醇)／0．5mol／L Ca(NO3)2水溶液三元相图及水溶液反应机理的分析，确定了最佳反相微乳液组成；研究了HLB值和表面活性剂用量对羟基磷灰石颗粒大小的影响。实验结果表明，最佳反相微乳液组成为：47．6(wt)％的环己烷、37．4(wt)％的表面活性剂和助表面活性剂、15(wt)％0．5mol／L的Ca(NO3)2水溶液。     

Meso-tetraaryl cofacial bisporphyrins delivered by Suzuki cross-coupling

The Suzuki cross-coupling methodology provides a facile synthetic approach for the modular preparation of meso-tetraaryl cofacial bisporphyrins anchored by xanthene and dibenzofuran. This synthetic method furnishes cofacial bisporphyrin templates with enhanced steric and electronic protection from mu-oxo formation and oxidative degradation. The ability of these platforms to support multielectron oxidation chemistry mediated by proton-coupled electron transfer (PCET) is demonstrated by their reactivity for the catalytic disproportionation of hydrogen peroxide to oxygen and water.     

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Poly(propylene carbonate) (PPC) is a new biodegradable aliphatic polycarbonate. However, the poor thermal stability and low glass transition temperatures (T_g) have limited its applications. To improve the thermal properties of PPC, organophilic montmorillonite (OMMT) was mixed with PPC by a solution intercalation method to produce nanocomposites. An intercalated-and-flocculated structure of PPC/OMMT nanocomposites was confirmed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The thermal and mechanical properties of PPC/OMMT nanocomposites were investigated by thermal gravimetric analysis (TGA), differential scanning calorimetric (DSC), and electronic tensile tester. Due to the nanometer-sized dispersion of layered silicate in polymer matrix, PPC/OMMT nanocomposites exhibit improved thermal and mechanical properties than pure PPC. When the OMMT content is 4 wt%, the PPC/OMMT nanocomposite shows the best thermal and mechanical properties. These results indicate that nanocomposition is an efficient and convenient method to improve the properties of PPC.     

聚合物 分散液晶体系的相分离结构对温度依赖性的研究

在不同温度下采用紫外光引发相分离法制备了聚合物分散液晶样品．用光学显微镜及扫描电镜研究了样品的相分离结构．采用对样品施加电压观察其微结构轮廓，或测量液晶微粒相变点的简单方法研究了聚合温度对相分离结果的影响．结果表明，在一定温度范围内，随着温度的增高，液晶微粒的平均尺寸趋于减小，而且形成的液晶微粒也逐渐变纯．作者给出了这些测试结果并进行了讨论．     

4-乙酰氨基-4’-甲基丙烯酰氨基-二苯基甲烷的合成及其聚合

N-芳基丙烯酰胺是-类功能性单体,它能与丙烯酸酯类单体进行自由基共聚合。本文以4,4'-二氨基二苯基甲烷为起始原料,合成了新的带有较长侧基的甲基丙烯酰胺类单体,即4-乙酰氨基-4'-甲基丙烯酰氨基-二苯基甲烷(AMDPM)。它能进行自由基聚合或与丙烯酸甲酯(MA)共聚合。     

Determination of pyrethroid metabolites in human urine by capillary gas chromatography-mass spectrometry

Summary An analytical method for the simultaneous determination of the pyrethroid metabolites cis and trans-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropane carboxylic acid, cis 3-(2,2-dibromovinyl)-2,2-dimethylcyclopropane carboxylic acid, 3-phenoxybenzoic acid and 4-fluoro-3-phenoxybenzoic acid in human urine samples is described. The urine is subjected to acid-induced hydrolysis followed by exhaustive solvent extraction, covering both conjugated and free acids, followed by a common derivatisation step yielding the corresponding methyl esters. Quantitation was by diastereomeric, capillary gas chromatography-mass spectrometry. It appears that 4-fluoro-3-phenoxybenzoic acid is a characteristic urinary marker for cyfluthrin exposure. The limits of determination are 0.5–1.0 g L^–1 urine depending on the metabolites concerned. The applicability of the method was tested on urine samples from pest control operators exposed occupationally to cypermethrin and cyfluthrin.     

The 1,3-Dipolar Cycloadditions of Nitrile Oxides and Nitrile Imines to Alkyl Dicyanoacetates

The readily available alkyl dicyanoacetates 1 reacted with the 1,3-dipolar reagents arenecarbonitrile oxides 2 ′ and arenecarbonitrile imines 5 ′ to afford 1,2,4-oxadiazol and 1,2,4-triazol derivatives. The arenecarbonitrile oxides 2 ′ with electron-donating groups on the arene ring gave products 3a – d resulting from addition on both CN groups of 1 , and those with electron-withdrawing groups provided mono-adducts 4a – e (Scheme 1). Arylnitrile imines 5 ′ reacted with 1 to offer both bis- and mono-addition products (Scheme 2); the bis-adducts 8a , b possess an ester structure, whereas the mono-adducts 6a – d present a ketene-hemiacetal structure.