Room‐Temperature Ferroelectric Material Composed of a Two‐Dimensional Metal Halide Double Perovskite for X‐ray Detection

Although two‐dimensional (2D) metal–halide double perovskites display versatile physical properties due to their huge structural compatibility, room‐temperature ferroelectric behavior has not yet been reported for this fascinating family. Here, we designed a room‐temperature ferroelectric material composed of 2D halide double perovskites, (chloropropylammonium)₄AgBiBr₈, using an organic asymmetric dipolar ligand. It exhibits concrete ferroelectricity, including a Curie temperature of 305 K and a notable spontaneous polarization of ≈3.2 μC cm^?2, triggered by dynamic ordering of the organic cation and the tilting motion of heterometallic AgBr₆/BiBr₆ octahedra. Besides, the alternating array of inorganic perovskite sheets and organic cations endows large mobility‐lifetime product (μτ=1.0×10^?3 cm² V^?1) for detecting X‐ray photons, which is almost tenfold higher than that of CH₃NH₃PbI₃ wafers. As far as we know, this is the first study on an X‐ray‐sensitive ferroelectric material composed of 2D halide double perovskites. Our findings afford a promising platform for exploring new ferroelectric materials toward further device applications.     

八信道高温超导多路器的实验研究

文中首先分析八信道高温超导多路器设计的方案,以及实现八信道高温超导多路器的技术;给出了用MgO基片为衬底,YBCO超导膜制备的高温超导滤波器设计仿真曲线及实际测试曲线;并对多路器所用制冷器的制冷量进行了计算;最后给出八信道高温超导多路器的实际测试曲线。     

Two-dimensional tellurium saturable absorber for ultrafast solid-state laser

Two-dimensional(2 D) Te nanosheets were successfully fabricated through the liquid-phase exfoliation(LPE) method. The nonlinear optical properties of 2 D Te nanosheets were studied by the open-aperture Z-scan technique. Furthermore, the continuous wave mode-locked Nd:YVO_4 laser was successfully realized by using 2 D Te as a saturable absorber(SA) for the first time, to the best of our knowledge. Ultrashort pulses as short as 5.8 ps were obtained at 1064.3 nm with an output power of 851 m W. This primary investigation indicates that the 2 D Te SA is a promising photonic device in the fields of ultrafast solid-state lasers.     

密堆积与中学化学中的晶体结构

联系新课程和化学奥赛的有关内容简要论述了晶体结构的密堆积;分析了密堆积在中学化学晶体结构学习中的地位和作用;举例说明了密堆积对于深刻理解晶体结构的内容和在解决晶体结构问题中的应用。     

热散焦效应对甲烷后向受激喇曼散射的影响

The conversion efficiency of stimulated Raman scattering (SRS) in CH4 is studied by using a single longitudinal mode second-harmonic Nd:YAG laser (532 nm, linewidth 0.003 cm-1, pulse-width (FWHM) 6.5 ns).Due to the heat release from vibrationally excited particles, SRS processes often suffer from the thermal defocusing effect (TDE). In view of 6.5 ns laser pulse width is much shorter than the vibrational relaxation time of CH4 molecules, TDE can only affect the SRS processes afterwards. In the cases of low laser repetition, TDE will be not serious, because it will be removed by the thermal diffusion in Raman medium before the next pulse arrives. At the laser repetition rate 2 Hz, CH4 pressure 1.1 MPa and pump laser energy 95 m J, the quantum conversion efficiency of backward first-Stokes (BS1) has attained 73%. This represents the highest first-stokes conversion efficiency in CH4. Furthermore, due to the relaxation oscillation, the BS1pulses are narrowed to about 1.2 ns. As a result, the BS1 peak power turns out to be 2.7 times that of the pump. Its beam quality is also much better and is only slightly affected by TDE. This reason is that BS1 represents a wave-front-reversed replica of the pump beam, which can compensate the thermal distortions in Raman amplify process. Under the same conditions, but pump laser repetition rate as 10 Hz, the conversion efficiency of BS1 goes down to 36% due to TDE. From this study, we expect that a well-behaved 630 nm Raman laser may be designed by using a closed CH4/He circulating-cooling system, which may have some important applications.     

隧道再生双有源区AlGaInP发光二极管提取效率的计算

建立了发光二极管提取效率的理论计算模型,分析了影响隧道再生双有源区AlGaInP发光二极管提取效率的主要因素,包括从出光表面出射的光、体内的光吸收损耗、衬底对光的吸收损耗、金属电极对光的吸收损耗,模拟计算了隧道再生双有源区AlGaInP发光二极管的提取效率,计算得到隧道再生双有源区AlGaInP LED管芯的上有源区和下有源区提取效率分别为5．24％和9．16％。     

一种新型偶氮染料在扭曲向列相液晶显示取向中的应用

研究了一种新型偶氮材料sy03在光控取向中的应用。将sy03加入聚酰亚胺SE-3310(Nissan)与N,N-二甲基甲酰胺(DMF)的混合溶液中作为90°扭曲向列相液晶显示(Twisted nematic liquid crystal display,TN-LCD)的光取向材料,测量由它作为取向膜的扭曲向列型盒的电光特性与仅用SE-3310取向的扭曲向列型盒电光特性比较,发现sy03偶氮的加入使得扭曲向列型盒的响应时间短到98 ms、阈值电压也降低到1.7 V左右。而且随曝光时间的增加,响应时间和衬比度都有所提高,电光响应曲线也更为陡峭。加热到150℃后,其电光特性并没有明显变化,证明了它良好的热稳定性。最后通过测量偏振紫外吸收光谱,分析得出液晶分子易取向方向与激发光源偏振方向垂直。     

Dimerization of Acetylene to Monovinylacetylene (MVA) by Bimetallic Zr/Cu Catalyst in Nieuwland Catalytic System

Nieuwland catalyst is a key step in the dimerization of acetylene. Various zirconium metal additives incorporating Nieuwland catalysts were prepared, and their catalytic performances were assessed in acetylene dimerization. Different characterization techniques (i.e., thermogravimetric analysis, temperature-programmed reduction, X-ray diffraction, X-ray photoelectron spectroscopy, hydrogen ion concentration measurement and transmission electron microscopy) were employed in this study. The best catalytic performance was obtained over zirconium-acetylacetonate-incorporated Nieuwland catalysts, with an acetylene conversion of 53.3% and a monovinylacetylene selectivity of 87.4%. Based on these results, the zirconium acetylacetonate additive could reduce the types of transition state complexes, and it could also change the morphology of the catalyst. In addition, the additives could significantly inhibit the occurrence of trimerization products and polymers. Hence, the conversion of acetylene, monovinylacetylene selectivity, and stability of the Nieuwland catalysts were enhanced.     

二氧化钛对分相液滴自清洁釉的性能影响

采用长石、高岭土、石英为主要原料制备了分相液滴自清洁釉.利用扫描电镜、X射线衍射仪和显微镜接触角测量仪等测试仪器表征了样品性能.研究结果表明:当二氧化钛添加量为5wt;时,釉表面形成大量细小的孤立液滴,体积分数达58.48;,具有高的表面硬度(869.10 kg/mm2)和良好的亲水自清洁性(表面润湿角为13.361°).与现有的表面涂覆纳米涂料相比,该自清洁釉耐磨性强,制备方法简单,在中高温建筑陶瓷领域有着良好的应用前景,符合绿色环保理念.     

A control volume finite element method for three-dimensional three-phase flows

A novel control volume finite element method with adaptive anisotropic unstructured meshes is presented for three-dimensional three-phase flows with interfacial tension. The numerical framework consists of a mixed control volume and finite element formulation with a new P₁DG-P₂ elements (linear discontinuous velocity between elements and quadratic continuous pressure between elements). A “volume of fluid” type method is used for the interface capturing, which is based on compressive control volume advection and second-order finite element methods. A force-balanced continuum surface force model is employed for the interfacial tension on unstructured meshes. The interfacial tension coefficient decomposition method is also used to deal with interfacial tension pairings between different phases. Numerical examples of benchmark tests and the dynamics of three-dimensional three-phase rising bubble, and droplet impact are presented. The results are compared with the analytical solutions and previously published experimental data, demonstrating the capability of the present method.