离子交换色谱法检测离子液体中阴离子

建立了用阴离子交换分离柱、化学抑制模式、电导检测测定系列离子液体中BF-4阴离子及其他杂阴离子(F-、Cl-、Br-)含量的方法,并用于在线监控离子液体合成工艺中阴离子杂质含量.确定淋洗液组成为1.6 mmol/L Na2CO3+3.9 mmol/L NaHCO3,流速为0.6 mL/min.本方法对所测阴离子检出限分别为50 μg/L(F-、Br-)和80 μg/L(BF-4);线性范围在3个数量级以上;r＞0.999;回收率在98%～102%之间.方法用于对离子液体小试工艺样品分析及过程监控时,结果满意,样品的RSD小于2.6%(n＝6).     

Fundamental studies on the intermediate layer of a bipolar membrane: Part III. Effect of starburst dendrimer PAMAM on water dissociation at the interface of a bipolar membrane

Starburst dendrimer polyamidoamine (PAMAM) with ellipsoidal or spheroidal shape is structure-regular and has much more amino groups than conventional polymers. This paper investigates the possibility of these amino groups on water dissociation in a bipolar membrane interface. To do this, a bipolar membrane is prepared by casting the solution of sulfonated poly(phenylene oxide) (SPPO) in dimethyl formamide (DMF) on a commercial anion exchange membrane that is immersed in PAMAM aqueous solution in advance. The existence of PAMAM adsorbed on the membrane is proved by X-ray photoelectron spectroscopy (XPS), and the adsorption amount is evaluated by weighting method. The junction thickness of the prepared bipolar membrane is determined by electrochemical impedance spectroscopy (EIS), and the performance is evaluated by current–voltage curves. The experiments show that both the generation and concentration of PAMAM would strongly affect the characteristics of the bipolar membranes. There exists a transitional concentration for various generations PAMAMs to catalyze effectively the water dissociation, and above or below the transitional concentration the performance of bipolar membranes is decreasing. The higher the generation, the lower the concentration. Moreover, at a fixed solution concentration, there is not the simple relation of monotone decreasing or increasing between the performance of bipolar membranes and the generations of PAMAMs. All these can be explained according to the characteristics of PAMAMs combined with available water dissociation theory.     

Reaction of porous silicon with both end-functionalized organic compounds bearing alpha-bromo and omega-carboxy groups for immobilization of biomolecules

Both end-functionalized (alpha-bromo and omega-carboxy) compounds were first tested for the radical reaction on the silicon-hydride (Si-H) terminated porous silicon (PSi) with/without the presence of diacyl peroxide initiator under microwave irradiation. Then the carboxylic acid monolayers (CAMs) assembled on PSi through the robust Si-C bonds were converted to amino-reactive linker, N-hydroxysuccinimide (NHS)-ester, terminated monolayers. And finally two proteins of bovine serum albumin (BSA) and lysozyme (Lys) were immobilized through amide bonds. The optimum PSi membrane for protein immobilization without collapse, with parameters of porous radii 4-10 nm and depth 0.2-4.6 mum, was prepared from the (100)-oriented p-type silicon wafer. The chemically converted surface products were monitored with Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and field emission scanning electron microscopy (FESEM).     

溶剂热法制备纳米氧化镍及其表征

以乙酰丙酮镍、油酸、油胺为原料，十八烯为溶剂，聚乙烯吡咯烷酮为表面活性剂，采用溶剂热法，在不同反应条件制备了纳米级氧化镍材料.通过X射线衍射（X-ray diffraction，XRD）、透射电子显微镜（Transmission electron microscope，TEM）、紫外-可见光吸收光谱（Ultraviolet-visible spectroscopy，UV-Vis）光谱分析以及塔菲尔（Tafel）测试考察了反应物比例、保温时间、表面活性剂（PVP）、油胺的量对产物微结构、粒径、形貌、光学以及电化学活性性能的影响.实验结果表明：在反应物n[Ni（acac）₂]∶n（OA）=1∶2、添加剂PVP质量分数为1.66%、油胺物质的量为30 mmol、200℃下保温8 h时，可获得粒径约为30～40 nm纯相氧化镍，具有最佳电化学活性，交换电流密度为J₀=1.23×10^-2 mA·cm^-2.     

4D-QSAR analysis of a series of antifungal p450 inhibitors and 3D-pharmacophore comparisons as a function of alignment

A training set of 55 antifungal p450 analogue inhibitors was used to construct receptor-independent four-dimensional quantitative structure-activity relationship (RI 4D-QSAR) models. Ten different alignments were used to build the models, and one alignment yields a significantly better model than the other alignments. Two different methodologies were used to measure the similarity of the best 4D-QSAR models of each alignment. One method compares the residual of fit between pairs of models using the cross-correlation coefficient of their residuals of fit as a similarity measure. The other method compares the spatial distributions of the IPE types (3D-pharmacophores) of pairs of 4D-QSAR models from different alignments. Optimum models from several different alignments have nearly the same correlation coefficients, r(2), and cross-validation correlation coefficients, xv-r(2), yet the 3D-pharmacophores of these models are very different from one another. The highest 3D-pharmacophore similarity correlation coefficient between any pair of 4D-QSAR models from the 10 alignments considered is only 0.216. However, the best 4D-QSAR models of each alignment do contain some proximate common pharmacorphore sites. A test set of 10 compounds was used to validate the predictivity of the best 4D-QSAR models of each alignment. The "best" model from the 10 alignments has the highest predictivity. The inferred active sites mapped out by the 4D-QSAR models suggest that hydrogen bond interactions are not prevalent when this class of P450 analogue inhibitors binds to the receptor active site. This feature of the 4D-QSAR models is in agreement with the crystal structure results that indicate no ligand-receptor hydrogen bonds are formed.     

A Review of Results on Axially Symmetric Navier-Stokes Equations,with Addendum by X. Pan and Q. Zhang

In this paper, we give a brief survey of recent results on axially symmetric Navier-Stokes equations (ASNS) in the following categories: regularity criterion, Liouville property for ancient solutions, decay and vanishing of stationary solutions. Some discussions also touch on the full 3 dimensional equations. Two results, closing of the scaling gap for ASNS and vanishing of homogeneous D solutions in 3 dimensional slabs will be described in more detail.In the addendum, two new results in the 3rd category will also be presented, which are generalizations of recently published results by the author and coauthors.     

Full-wave analysis of radiation effect of microstrip transmission lines

A full-wave analysis of radiation effects produced by discontinuities in microstrip and buried microstrip transmission lines is presented. Beginning with the dyadic Green's function for a dielectric slab, with an embedded source, an integral equation is formulated. This equation is then solved by the method of moments to obtain the current distributions along the transmission line, in particular, near the discontinuities. Employing these results, the near- and far-zone fields, as well as radiation patterns are computed. The results from our method showed good agreement with those of previous publications in complex reflection and transmission coefficients, and equivalent capacitance values. It is found that under resonance conditions the radiation efficiency of a simple structure can exceed 41%, which may cause a potential problem in electromagnetic compatibility. Our analytic result also shows that the maximum radiation occurs when the source is located at the height of from the bottom ground plane, which should be prevented.     

A unified analysis of exact methods of inverting the 2-D exponential radon transform, with implications for noise control in SPECT

Exact methods of inverting the two-dimensional (2-D) exponential Radon transform have been proposed by Bellini et al. (1979) and by Inouye et al. (1989), both of whom worked in the spatial-frequency domain to estimate the 2-D Fourier transform of the unattenuated sinogram; by Hawkins et al. (1988), who worked with circularly harmonic Bessel transforms; and by Tretiak and Metz (1980), who followed filtering of appropriately-modified projections by exponentially-weighted backprojection. With perfect sampling, all four of these methods are exact in the absence of projection-data noise, but empirical studies have shown that they propagate noise differently, and no underlying theoretical relationship among the methods has been evident. Here, an analysis of the 2-D Fourier transform of the modified sinogram reveals that all previously-proposed linear methods can be interpreted as special cases of a broad class of methods, and that each method in the class can be implemented, in principle, by any one of four distinct techniques. Moreover, the analysis suggests a new member of the class that Is predicted to have noise properties better than those of previously-proposed members.     

(Z)-1-[2-(Triarylstannyl)vinyl]-1-cycloheptanols: Synthesis, characterization, halodemetallation and crystal structures

The synthesis and characterization by ¹H, ¹³C, ¹¹⁹Sn NMR and ¹¹⁹Sn Mössbauer spectroscopy of (Z)-1-[2-(triphenylstannyl)vinyl]-1-cycloheptanol,

Full-size image

(1), and (Z)-1-[2-tri-p-tolylstannyl)vinyl-1-cycloheptanol,

Full-size image

(2), are described, together with their halodemetallation by I₂, Br₂ and ICIl to yield derivatives of the types

Full-size image

(Ar = phenyl or p-tolyl, N = 1, 2; X = I, Br, Cl, respectively). The solid-state structures of four compounds have been determined by X-ray diffraction analysis. In the crystals of

Full-size image

(1) and

Full-size image

(2) the Sn atom has a tetrahedral geometry distorted towards trigonal bipyramid as a consequence of a close intramolecular contact with the hydroxyl O(1) atom of 2.742(3) Å and 2.768(3) Å, respectively. A trigonal bipyramidal geometry is found in

Full-size image

(12) and

Full-size image

(4), in which significant Sn---O(1) interactions are noted [2.437(8) Å and 2.407(8) Å, respectively].