The importance of electrochemistry-related etching in thegate-groove fabrication for InAlAs/InGaAs HFETs

For the first time, the surface metal on nonalloyed ohmic electrodes is found to significantly change the profiles of gate grooves, when resist openings are employed to monitor drain current during wet-chemical gate recess for sub-micron InAlAs/lnGaAs heterojunction field-effect transistors (HFETs). The surface metal of Ni enhances the etching rate in comparison with that in the absence of electrodes by a factor of 4 and 10, laterally and vertically, which is favorable to fabricate deep gate grooves with small side etching. The Pt surface metal, however, leads to preferential etching of InGaAs over InAlAs, which can be useful to realize large side etching. The existence of an electrochemistry-related etching component, which arises when the ohmic electrodes are present during recess etching, is considered to be responsible for these behaviors     

复杂目标近场电磁散射的可视化计算方法

首次介绍了复杂目标近场散射计算的可视化方法。采用非均匀有理Ｂ样条曲面（ＮＵＲＢＳ）精确构造任意形状散射体，结合几何体近场透视变换和Ｚ－Ｂｕｆｆｅｒ技术实现了基于Ｗｉｎｄｏｗｓ平台的近场散射计算。提出广义雷达散射截面的概念并给出的若干算例。该方法充分利用了计算机３Ｄ图形设备的几何运算能力，运算速度快，严谨高，可扩展性好。     

Analysis of a resonant-cavity enhanced GaAs/AlGaAs MSMphotodetector

The authors have developed a 2-D device simulator for heterostructure metal-semiconductor-metal (MSM) photodetectors. They have incorporated a model of multilayer optics into the simulator and used it to analyze the temporal response of a resonant-cavity enhanced heterostructure with a confining buffer layer and a distributed Bragg reflector (DBR). The authors show that through fine tuning the layer thicknesses, optical resonance enhancement of the light absorption can be obtained     

Diffraction characteristics of superimposed holographic gratings inplanar optical waveguides

A coupled-mode analysis of superimposed holographic transmission gratings in single-mode planar optical waveguides is presented. The diffraction characteristics are shown to be sensitive to the polarization of the incident wave, the angular separation of the output waves and the relative index modulation between the gratings. The coupling between gratings affects the diffraction efficiencies and decreases the angular and wavelength selectivities. Nevertheless, good channel separation and high fanout can be obtained together     

一类非线性单调型方程的区域分裂法

本文考虑了一类非线性单调问题的加性Schwgrz交替法和异步平行算法,并得到了在能量模意义下的收敛性结果,最后还讨论了格式的有限元离散。     

光孤子相互作用对压缩态的影响

在线性近似条件下，量子化了非线性薛定谔方程，用后向传播法数值求解了光孤子相互作用对压缩比的影响。数值结果表明，在碰撞距离附近，压缩比显著增加。     

美籍华裔专家讲通信工程技术新动态

本文扼要介绍１９９５年北京中美工程技术研讨会通信组五位美籍华裔专家关于通信技术新动态的专题报告。一是宽带综合业务数字网的同步数字系列（ＳＤＨ）和异步转移模式（ＡＴＭ）；二是光纤通信系统的光放大器（ＯＦＡ）、波分多路（ＷＤＭ）、光电子集成（ＯＥＩＣ）、色散补偿和新型光纤；三是蜂窝网车载移动通信和全国性个人通信业务（ＰＣＳ）、时分多址（ＴＤＭＡ）和码分多址（ＣＤＭＡ），四是智能网（ＩＮ）体系结构、概念模型和业务管理系统（ＳＭＳ）；五是数字传输网的恢复（ＦＡＳＴＡＲ）、维护（ＴＭＰ）和供应（ＴＳＮＯＷ）三种管理平台，及综合网络管理系统（ＩＮＭＳ）。     

ZnO陶瓷材料的负阻特性

介绍了ＺｎＯ陶瓷的负阻特性，主要研究了ＭｎＯ２掺杂和Ｎｉ２Ｏ３掺杂对ＺｎＯ陶瓷负阻特性的影响。     

一种生成p元统一序列的快速算法

p元统一序列是近期提出的一种具有理想自相关性能的多元序列,但是原有的生成方法比较复杂,不好实现。这里提出了一种快速生成p元统一序列的算法,该算法借助m序列的和序列作基础序列,和相应内部序列的移位序列可以快速生成任何长度的p元统一序列,比以往的生成方法简单易行且易于理解。     

Developing a hybrid emulsion polymerization system to synthesize Fe3O4/polystyrene latexes with narrow size distribution and high magnetite content

A hybrid emulsion polymerization was formulated for synthesizing Fe₃O₄/polystyrene composite latex. This system, containing binary droplets that are magnetic (Mag)‐droplets with a diameter of 100–200 nm and styrene (St)‐droplets with a diameter of 3–4 μm, was obtained by mixing Mag‐miniemulsion and St‐macroemulsion. With extremely low surfactants concentration (?critical micelle concentration, CMC), the nucleated loci are selectively controlled in the Mag‐droplets, as the result of smaller droplet size and larger surface ratio. Both water‐soluble potassium persulfate (KPS) and oil‐soluble 2,2′‐azobis(2‐isobutyronitrile) was adopted to initiate the polymerization. In the presence of KPS, magnetic polystyrene latices with particles size of 60–200 nm, narrow size distribution, and high magnetite content (86 wt % measured by TGA) were attained successfully. The synthesized magnetic Fe₃O_4/polystyrene latices assembled into well‐ordered hexagonal structure in the surface of a carbon supported copper grid. The influence of various parameters on various aspects of the as‐synthesized Fe₃O₄/polystyrene was investigated in detail: type of initiator on composite morphology, feed ratio of Mag‐miniemulsion and St‐macroemulsion on magnetite content, and hydrophobic agent or amount of surfactant on size and size distribution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5285–5295, 2007