Advances in pesticide biosensors: current status, challenges, and future perspectives

Public concern over pesticide residues has been increasing dramatically owing to the high toxicity and bioaccumulation effects of pesticides and the serious risks that they pose to the environment and human health. It is therefore crucial to monitor pesticide residues by using various analytical methods and techniques, especially highly sensitive, highly selective, simple, rapid, cost-effective, and portable ones. Biosensor strategies have become research hotspots and ideal candidates for pesticide detection, having such features as high sensitivity, fast response, robustness, low cost and miniaturization, as well as in situ and real-time monitoring. This review covers advances in the design and fabrication of biosensors for pesticide detection since 2005. Special emphasis is placed on the state-of-art selection of receptors, the use of different transduction techniques and fast screening strategies, and the application of various biosensors developed in food and environmental safety. Both advantages and drawbacks of these techniques are then summarized. Finally, challenges, strategies, and perspectives in further developing pesticide biosensors are also discussed.

DFT Study on Homolytic Dissociation Enthalpies of C-I Bonds

The C-I bond dissociation enthalpies （BDE） of various organic iodides were calculated using high-level theoretical methods including MP2 and CCSD（T） with extrapolated basis set as well as a number of density functional theory methods. After systematic evaluation of the theoretical results against available experimental C-I BDEs, it was found that the MPW LYPIM method gave the lowest root mean square error. We, therefore, used this method to examine the substituent effects on different categories of C（sp3）-I and C（sp2）-I bonds. Fur thermore, the remote substituent effects on the C-I BDEs of substituted iodobenzenes and substituted （iodomethyl）benzenes were also investigated at the same level. The C-I BDEs of typical heteroaromatic iodides including five-membered and six-membered heterocyclic iodides were also examined.     

Reversible high‐temperature phase transition of a manganese(II) formate framework with imidazolium cations

A new metal–formate framework, poly[1H‐imidazol‐3‐ium [tri‐μ₂‐formato‐manganese(II)]], {(C₃H₅N₂)[Mn(HCOO)₃]}_n, was synthesized and its structural phase transition was studied by thermal analysis and variable‐temperature X‐ray diffraction analysis. The transition temperature is around 435 K. The high‐temperature phase is tetragonal and the low‐temperature phase is monoclinic, with a β angle close to 90°. The relationship of the unit cells between the two phases can be described as: a_HT = 0.5a_LT + 0.5b_LT; b_HT = −0.5a_LT + 0.5b_LT; c_HT = 0.5c_LT. In the high‐temperature phase, both the framework and the guest 1H‐imidazol‐3‐ium (HIm) cations are disordered; the HIm cations are located about 2mm sites and were modelled as fourfold disordered. The Mn and a formate C atom are located on fourfold rotary inversion axes, while another formate C atom is on a mirror plane. The low‐temperature structure is ordered and consists of two crystallographically independent HIm cations and two crystallographically independent Mn²⁺ ions. The phase transition is attributable to the order–disorder transition of the HIm cations.     

Highly selective synthesis of single-walled carbon nanotubes from methane in a coupled Downer-turbulent fluidized-bed reactor

For the synthesis of single-walled carbon nanotubes (SWCNTs) from CH₄ over a Fe/MgO catalyst, we proposed a coupled Downer-turbulent fluidized-bed (TFB) reactor to enhance the selectivity and yield (or production rate) of SWCNTs. By controlling a very short catalyst residence time (1–3 s) in the Downer, only part of Fe oxides can be reduced to form Fe nano particles (NPs) available for the growth of SWCNTs. The percentage of unreduced Fe oxides increased and the yield of SWCNTs decreased accordingly with the increase of catalyst feeding rate in Downer. SWCNTs were preferentially grown on the catalyst surface and inhibited the sintering of the Fe crystallites which would be formed thereafter in the downstream TFB, evidenced by TEM, Raman and TGA. The coupled Downer-turbulent fluidized-bed reactor technology allowed higher selectivity and higher production rate of SWCNTs as compared to TFB alone.     

Development of a rapid method for the simultaneous separation and determination of 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol and its N- and O-glucuronides in human urine by liquid chromatography–tandem mass spectrometry

Determination of the tobacco-specific nitrosamine metabolite 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL) and its N- and O-glucuronides (NNAL-N-Gluc and NNAL-O-Gluc) is important for toxicology analysis of tobacco smoke induced carcinogenicity and the understanding of detoxification mechanisms of the carcinogenic nitrosamine in humans. But previously reported indirect measurement methods involving enzymolysis and base treatment steps were tedious and time-consuming. In this work, a direct measurement method for simultaneous determination of urinary NNAL, NNAL-N-Gluc and NNAL-O-Gluc by liquid chromatography–tandem mass spectrometry (LC–MS/MS) in a single run was developed for the first time without the need to perform enzymatic or base hydrolysis. Urine samples were purified using dichloromethane and further extracted by solid-phase extraction. Then they were analyzed by LC–MS/MS operated in electrospray positive ionization mode. Chromatographic separation was achieved on a Phenomenex Kinetex PFP column within 6 min. The proposed method was validated and the results demonstrated that the method can produce satisfactory recoveries and reproducibility for the analytes. The applicability of this newly developed method was investigated for the simultaneous analysis of the three metabolites in smokers’ urine and the obtained results were comparable to those detected using the conventional enzymolysis method.     

Molecule-binding dependent assembly of split aptamer and γ-cyclodextrin: A sensitive excimer signaling approach for aptamer biosensors

A highly sensitive and selective fluorescence aptamer biosensors for the determination of adenosine triphosphate (ATP) was developed. Binding of a target with splitting aptamers labeled with pyrene molecules form stable pyrene dimer in the γ-cyclodextrin (γ-CD) cavity, yielding a strong excimer emission. We have found that inclusion of pyrene dimer in γ-cyclodextrin cavity not only exhibits additive increases in quantum yield and emission lifetime of the excimer, but also facilitates target-induced fusion of the splitting aptamers to form the aptamer/target complex. As proof-of-principle, the approach was applied to fluorescence detection of adenosine triphosphate. With an anti-ATP aptamer, the approach exhibits excimer fluorescence response toward ATP with a maximum signal-to-background ratio of 32.1 and remarkably low detection limit of 80 nM ATP in buffer solution. Moreover, due to the additive fluorescence lifetime of excimer induced by γ-cyclodextrin, time-resolved measurements could be conveniently used to detect as low as 0.5 μM ATP in blood serum quantitatively.     

Construction of microscale structures in enclosed microfluidic networks by using a magnetic beads based method

A large number of microscale structures have been used to elaborate flowing control or complex biological and chemical reaction on microfluidic chips. However, it is still inconvenient to fabricate microstructures with different heights (or depths) on the same substrate. These kinds of microstructures can be fabricated by using the photolithography and wet-etching method step by step, but involves time-consuming design and fabrication process, as well as complicated alignment of different masters. In addition, few existing methods can be used to perform fabrication within enclosed microfluidic networks. It is also difficult to change or remove existing microstructures within these networks. In this study, a magnetic-beads-based approach is presented to build microstructures in enclosed microfluidic networks. Electromagnetic field generated by microfabricated conducting wires (coils) is used to manipulate and trap magnetic beads on the bottom surface of a microchannel. These trapped beads are accumulated to form a microscale pile with desired shape, which can adjust liquid flow, dock cells, modify surface, and do some other things as those fabricated microstructures. Once the electromagnetic field is changed, trapped beads may form new shapes or be removed by a liquid flow. Besides being used in microfabrication, this magnetic-beads-based method can be used for novel microfluidic manipulation. It has been validated by forming microscale dam structure for cell docking and modified surface for cell patterning, as well as guiding the growth of neurons.     

Development of a sensitive and reliable high performance liquid chromatography method with fluorescence detection for high-throughput analysis of multi-class mycotoxins in Coix seed

As an edible and medicinal plant, Coix seed is readily contaminated by more than one group of mycotoxins resulting in potential risk to human health. A reliable and sensitive method has been developed to determine seven mycotoxins (aflatoxins B₁, B₂, G₁, G₂, zearalenone, α-zearalenol, and β-zearalenol) simultaneously in 10 batches of Coix seed marketed in China. The method is based on a rapid ultrasound-assisted solid–liquid extraction (USLE) using methanol/water (80/20) followed by immunoaffinity column (IAC) clean-up, on-line photochemical derivatization (PCD), and high performance liquid chromatography coupled with fluorescence detection (HPLC-FLD). Careful optimization of extraction, clean-up, separation and detection conditions was accomplished to increase sample throughput and to attain rapid separation and sensitive detection. Method validation was performed by analyzing samples spiked at three different concentrations for the seven mycotoxins. Recoveries were from 73.5% to 107.3%, with relative standard deviations (RSDs) lower than 7.7%. The intra- and inter-day precisions, expressed as RSDs, were lower than 4% for all studied analytes. Limits of detection and quantification ranged from 0.01 to 50.2 μg kg⁻¹, and from 0.04 to 125.5 μg kg⁻¹, respectively, which were below the tolerance levels for mycotoxins set by the European Union. Samples that tested positive were further analyzed by HPLC tandem electrospray ionization mass spectrometry for confirmatory purposes. This is the first application of USLE-IAC-HPLC-PCD-FLD for detecting the occurrence of multi-class mycotoxins in Coix seed.