Photoluminescence properties of the composite of porous alumina and poly (2,5-dibutoxy-1,4 phenylenevinylene)

The spin coating method was used to assemble polymer (Poly (2,5-dibutoxy-1,4-phenylenevinylene)) (DBO-PPV) into the pores of porous alumina which was prepared by anodization. Four peaks in the photoluminescence (PL) spectra of the composite, with contributions from the DBO-PPV and porous alumina, were found. It was also found that the light emitting from the porous alumina could excite the photoluminescence of DBO-PPV. The nanometer effect of the porous alumina can lead to a blue shift of 90 nm of the PL peaks of DBO-PPV.     

Preparation and characterization of ZnO nanorods from NaOH solutions with assisted electrical field

ZnO naorods on ZnO-coated seed substrates were fabricated by solution chemical method from Zn(NO₃)₂/NaOH under assisted electrical field. The working mechanism of electrical field was analyzed and the factors affecting the rod growth such as potential, precursor concentration and growth temperature were elucidated. The structural and optical properties are characterized by SEM, TEM, XRD, HRTEM and UV-vis. The results indicated that the nanorods have wurtzite structure without electrical field and are primarily of zincite structure under electrical field; when the electrical field is 1.1-1.3 V, not only the elevation of ion diffusion and adsorption lower the crystallite/solution interfacial energy and then the crystal nucleation barrier by increasing charge intensity, but also the production of H⁺ through oxidation of OH⁻ increases properly the degree of solution supersaturation near the substrate, and thus lowers the activation energy. Both the two processes do favor to rod growth. With increasing precursor concentration in this system, the average diameter and length of ZnO nanorods increase, leading to decreasing of optical transmittance. The maximum rod growth rate at given concentration of Zn²⁺ occurs at a specific temperature.     

Anchoring Properties of Nematic Liquid Crystals Studied Using the Attenuated Total Reflection Method

By using the attenuated total reflection method associated with the excitation of surface plasmons, the tilt angle of the liquid crystal director and its gradient at the surface are measured in a planar nematic cell as a function of the applied voltage. The surface anchoring anisotropy δπ of the liquid crystal and the surface elastic constant k_s, are found to be δπ = 0.288 erg/cm and k_s, = 9·12 × 10^-11 erg, respectively, when the boundary condition suggested by Barbero et al is used. The theoretical and experimental values obtained with this boundary condition and that of Mada are discussed. The results show that the boundary condition proposed by Barbero et al is in better agreement with the experiment.     

脉冲相干激光雷达对运动目标成像模拟

针对运动目标，在考虑激光雷达方程、信噪比和自动增益、成像指标、噪声、图像处理等模块的基础上，对脉冲相干成像激光雷达进行了运动目标的成像模拟。     

用多焦点全息透镜实现多重谱分数傅里叶变换

提出用多焦点全息透镜实现多重谱分数傅里叶变换.利用全息方法通过一次曝光制作出多焦点的全息透镜,分析了用此全息元件实现这种变换的条件,并在实验上实现了多重谱分数傅里叶变换. 实验结果表明这种变换方法简便可行,可广泛应用于多通道光学信息处理系统及多目标图像识别系统中.     

会议电视系统及其发展现状

讨论会议电视系统的组成，种类及设计标准，介绍其发展现状及应用中存在的问题。     

利用莫尔条纹的准正弦特性的三维轮廓术

分析了两个矩形光栅迭合产生的莫尔条纹的光强分布特性，通过选择适当的光栅参数，可得到一个近似的正弦分划板，并把它用于三维面形测量中，实验结果表明，这种方法简单，易于自动处理，有广泛的实用价值。     

基于移动Agent技术的QoS保障机制

介绍了移动Agent的基本特性。移动Agent可在异构的网络各个节点间自由地移动,它能感知网络的状态,监控系统并与其他Agent进行交互。IETF的IS模型采用了RSVP(ResourcereSerVationProtocol)协议对系统资源进行预留,从而达到一定程度上保障所需QoS的目的。QoS保障机制将移动agent技术与RSVP协议结合起来,通过资源预留和agent动态移动的实现可以达到更好地改善QoS的目的。     

2007年"世界电信和信息社会日"解读

继本刊2007年第1期刊发了国际电联副秘书长赵厚麟先生为本刊读者的新年贺辞后，2007年4月17日本刊又收到赵厚麟先生从日内瓦发来的文章，其中全面解读和诠释了2007年5月17日“世界电信和信息社会日”的来由和将其主题确定为“让信息通信技术惠及下一代”的重要涵义，在此我们将全文刊出以飨读者，让我们共同为世界电信和信息技术的发展做出努力。[编者按]     

热载流子注入对MOS结构C─V和I─V特性的影响

讨论了热载流子注入对ＭＯＳ结构Ｃ─Ｖ和Ｉ─Ｖ特性的影响。指出热载流子效应引起载流子陷落和界面态的产生，导致Ｃ─Ｖ特性曲线畸变、平带电压漂移和恒定电压下ＳｉＯ２漏电流随时间漂移。本文论述了这些漂移的机理，提出了漂移的ｔｎ物理模型，从而很好地解释了实验所观察到的现象。