钙与 DBC-偶氮氯膦显色反应的研究及其在高纯氧化钇中钙的测定的应用

在PH8.5-9的液中,钙可与DBC-偶氮氯膦形成一种紫色的稳定配合物。该配合物在625nm处有最大吸收,表观摩尔吸光系数为2.6×10~4L.mol~(-1).cm~(-1),配合物组成为Ca:DBC-偶氮氯膦=1:1。在Zn-DTPA和乙二胺的存在下,较大量的Y~(3+)、Fe~(3+)及Cu~(2+)、Mo(Ⅵ)、Cr~(3+)等三十余种离子不干扰钙的测定。方法的选择性较好,利用本方法,并经简单萃取分离基体后,测定了高纯氧化钇和易切削钢中的微量钙,结果令人满意。标准加入试验回收率好。方法简便实用。     

某些有机物在氧化物载体表面的自发单层分散

自发单层分散原理已在载负型催化剂制备、再生等方面得到越来越广泛的应用[1，2]．许多氧化物和盐类可以在载体表面形成单层分散或亚单层分散．有些分散物与载体混合后在低于其熔点的温度下处理，就可以自发分散到载体表面[1，3]．这一现象通过XRD、LRS、XPS、SIMS、ISS、EXAFS     

Micranoic acids A and B: two new octanortriterpenoids from Schisandra micrantha

Two novel octanortriterpenoids, micranoic acids A (1) and B (2), along with three known compounds, kadsuric acid (3), 3beta-hydroxy-lanost-9(11),24(25)-dien-26-oic acid (4) and schizandronic acid (5), were isolated from the leaves and stems of Schisandra micrantha. The structures of 1 and 2 were determined by 1D and 2D NMR spectroscopic analysis. Micranoic acids A and B represent a new group of triterpenes in which the entire C-17 side chain has lost. This is the first report of octanortriterpenoids isolated from the family Schisandraceae.     

Stable monovalent aluminum(i) in a reduced phosphomolybdate cluster as an active acid catalyst

Low-valent aluminum Al(i) chemistry has attracted extensive research interest due to its unique chemical and catalytic properties but is limited by its low stability. Herein, a hourglass phosphomolybdate cluster with a metal-center sandwiched by two benzene-like planar subunits and large steric-hindrance is used as a scaffold to stabilize low-valent Al(i) species. Two hybrid structures, (H₃O)₂(H₂bpe)₁₁[Al^III(H₂O)₂]₃{[Al^I(P₄Mo^V₆O₃₁H₆)₂]₃·7H₂O (abbr. Al₆{P₄Mo₆}₆) and (H₃O)₃(H₂bpe)₃[Al^I(P₄Mo^V₆O₃₁H₇)₂]·3.5H₂O (abbr. Al{P₄Mo₆}₂) (bpe = trans-1,2-di-(4-pyridyl)-ethylene) were successfully synthesized with Al(i)-sandwiched polyoxoanionic clusters as the first inorganic-ferrocene analogues of a monovalent group 13 element with dual Lewis and Brønsted acid sites. As dual-acid catalysts, these hourglass structures efficiently catalyze a solvent-free four-component domino reaction to synthesize 1,5-benzodiazepines. This work provides a new strategy to stabilize low-valent Al(i) species using a polyoxometalate scaffold.

Monovalent aluminum(i) species was successfully stabilized using a reduced phosphomolybdate scaffold as a dual-acid catalyst for a four-component domino reaction.

Low- or sub-valence aluminum compounds are increasingly growing into a significant frontier subject in coordination and modern organic synthetic chemistry owing to their unique singlet carbene character, Lewis acid/base properties and catalytic reactivity.¹ However, low-valence aluminum(i) compounds have inherent electron deficiency and exhibit thermodynamic instability, making them prone to self-polymerization with metal–metal bonds² or disproportionation³ to metallic Al and Al(iii) species. Inspired by the special stabilizing effect of metallocene compounds, a ligand stabilization strategy has recently been undertaken to stabilize the low-valence aluminum center.^4,5 In this regard, the utilized ligand should satisfy two key criteria: (i) sufficient steric hindrance is required to inhibit monomer polymerization; and (ii) a suitable electronic effect is needed to stabilize the aluminum(i) center. A few organometallic Al(i) compounds protected by bulky organic groups have been prepared such as [(Cp*Al)₄] (Cp* = C₅Me₅),⁶ and [(CMe₃)₃SiAl₄].⁷ However, despite having the ligand effect, most of these Al(i) compounds still decompose in aqueous solutions or heating conditions. In contrast to organometallic Al(i) compounds, inorganic Al(i) structures, i.e. monomeric monohalides, only exist in gaseous form at high temperature⁸ and to the best of our knowledge, no stable inorganic Al(i) compound is known at room temperature due to thermodynamic instability. Therefore, exploring efficient strategies to synthesize stable inorganic Al(i) compounds remains highly desired but a great challenge.Polyoxometalates (POMs), a diverse family of inorganic molecular clusters based on early-transition metals (W, Mo, V, Nb, and Ta), have extensively attracted attention in research in various fields of materials science, coordination chemistry, medicinal chemistry and catalysis science.^9–11 Owing to their adjustable constituent elements and well-defined structures, POMs have been considered as promising inorganic ligands to stabilize high- and low-valent metal ions. For instance, Rompel et al.¹² reported one Keggin-type [α-CrW₁₂O₄₀]⁵⁻ anion in which a labile {Cr^IIIO₄} tetrahedral unit was assembled at the center of the cluster. Li and co-workers employed a monolacunary Keggin-type inorganic ligand to stabilize a high-valent Cu³⁺ ion.¹³ As a unique member of the POM family, the hourglass-type phosphomolybdate cluster {M[P₄Mo^V₆O₃₁]₂}ⁿ⁻ (abbr. M{P₄Mo₆}₂), consisting of two [P₄Mo^V₆O₃₁]¹²⁻ (abbr. {P₄Mo₆}₂) subunits bridged by one metal (M) center, represents a fully reduced metal-oxo cluster. With all Mo atoms in the oxidation state of (+5), a more negative charge is endowed to the cluster surface.^14,15 Such high electron density of {M[P₄Mo^V₆O₃₁]₂}ⁿ⁻ polyoxoanions provides an electron-rich local environment for the possible stabilization of unusual-valence metals. It is worth noting that the [P₄Mo^V₆O₃₁]¹²⁻ subunit presents near-planar triangular structures with the side sizes ranging from 7.50–7.92 Å (Fig. S1^†). The structural feature can supply sufficient steric hindrance to restrain the polymerization of low-valence metal species. Moreover, the six Mo atoms in each [P₄Mo^V₆O₃₁]¹²⁻ subunit arrange in a planar hexagonal-ring structure like a benzene ring, implying that such {M[P₄Mo^V₆O₃₁]₂}ⁿ⁻ clusters may have a similar delocalized electron structure to conjugated benzene or cyclopentadiene. These features make [P₄Mo^V₆O₃₁]¹²⁻ a promising candidate with respect to organic protecting groups to construct an inorganic ‘ferrocene’ analogue of Al(i) (Scheme 1). Therefore, we hypothesize that hourglass-type polyoxoanion clusters are promising to stabilize the labile Al(i) center and isolate inorganic Al(i) species.Open in a separate windowScheme 1Similar ferrocene-like sandwich structure features of an inorganic hourglass-type [Al^I(P₄Mo^V₆O₃₁)₂]²³⁻ polyanion to an organometallic [(η⁵-Cp*)₂Al^I]⁺ cation.Herein, we show a [P₄Mo^V₆O₃₁]¹²⁻ cluster as an inorganic scaffold to stabilize the Al(i) center in two hybrid compounds, (H₃O)₂(H₂bpe)₁₁[Al^III(H₂O)₂]₃{[Al^I(P₄Mo^V₆O₃₁H₆)₂]₃·7H₂O (abbr. Al₆{P₄Mo₆}₆) and (H₃O)₃(H₂bpe)₃[Al^I(P₄Mo^V₆O₃₁H₇)₂]·3.5H₂O (abbr. Al{P₄Mo₆}₂) (bpe = trans-1,2-di-(4-pyridyl)-ethylene), in which the labile Al(i) center is sandwiched by two [P₄Mo^V₆O₃₁]¹²⁻ sides, forming an inorganic moiety of a ‘ferrocene’ analogue. Both Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ are experimentally determined at room temperature for the first time, and prepared by hydrothermal reactions of Na₂MoO₄·2H₂O, H₃PO₄, AlCl₃·6H₂O, ethanol and N-containing bpe at 160 °C with slightly different pH values. Notably, the combination of ethanol, N-containing bpe and high hydrothermal temperature is a prerequisite to the isolation of Al(i) species. First, both ethanol and N-containing bpe were used to provide a reducing environment under hydrothermal conditions. By combining high temperature and pressure, sufficient energy is supplied to reduce Mo⁶⁺ and Al³⁺ ions to Mo⁵⁺ and Al⁺ species, respectively. Then, Mo⁵⁺ species and phosphoric acid molecules are assembled to form [P₄Mo₆O₃₁]¹²⁻ subunits, which are subsequently combined with Al⁺ ions to form hourglass-type [Al(P₄Mo₆O₃₁)₂]²³⁻, hence effectively stabilizing Al(i) species (Fig. 1). From the perspective of stereochemistry, two highly negative [P₄Mo₆O₃₁]¹²⁻ fragments, resembling the methyl cyclopentadiene organic group, sandwich one low-valent metal Al(i) center. Hence, the construction of a strong reducing hourglass-like skeleton makes it possible to stabilize the existing Al⁺ species.Open in a separate windowFig. 1Ball-and-stick diagram showing the assembly of the hourglass-type cluster {Al(P₄Mo₆)₂}.Single crystal X-ray diffraction revealed the hourglass-type {Al(P₄Mo₆)₂} cluster in Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ (Table S1^†), in which the [P₄Mo₆O₃₁]¹²⁻ subunits have a C₃ symmetry and display a near-planar structure formed by six edge-sharing {MoO₆} octahedra with alternating short Mo–Mo single bonds and long non-bonding Mo⋯Mo contacts. The side sizes of the {P₄Mo₆} subunit range from 7.50–7.92 Å, which supplies sufficient steric hindrance to restrain the polymerization or disproportionation of low-valence Al(i) species. All Mo atoms are in a reduced oxidation state of +5 and the central Al atoms are in the +1 oxidation state, as confirmed by bond valence calculations (Table S2^†). Thus, the synthesized Al{P₄Mo₆}₂ represents a fully reduced metal–oxygen cluster. Moreover, the six Mo atoms in each {P₄Mo₆} subunit present a benzene-like planar hexagonal-ring structure with a similar π-type delocalization electron interaction with Al(i) instead of organic bulky groups. Such π-type delocalization electron interaction constructs an inorganic ‘ferrocene’ analogue of Al(i) and produces sufficient delocalization energy to stabilize Al(i) species. Considering the formation mechanism of traditional metallocenes, {P₄Mo₆} subunits with a similar strong electron-donating ability and suitable steric-hindrance effect on Cp rings, augment the stability of Al(i) species. Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ compounds also present the first isolation of aluminum-sandwiched hourglass-type clusters in POM chemistry. Importantly, regarding the inherent and strong hydrolysis of aluminum species in water, these low-valent Al(i)-containing clusters represent the first example of stable solid-state inorganic sub-valent Al(i) compounds at room temperature.The asymmetric structure of Al₆{P₄Mo₆}₆ consists of two crystallographically independent {Al(P₄Mo₆)₂} clusters sandwiched by central Al(1) and Al(4) atoms, two bridging [Al(H₂O)₂]³⁺ (Al(2) and Al(3)) cations and six protonated bpe cations (Fig. S2^†). Aluminum centers involve two kinds of oxidation states: the central Al(1) and Al(4) are in the +1 state, while the bridging Al(2) and Al(3) are in the +3 state. Both Al(1) and Al(4) display the six-coordinated octahedral configuration and bridge two {P₄Mo₆} subunits to form two {Al^I(P₄Mo₆)₂} clusters. The average lengths of Al–O bonds are 2.318–2.324 Å for Al(1) and Al(4) (Table S3^†), which are slightly longer than those of classic Al–O bonds (1.90 Å) for Al(2) and Al(3), but close to that of the Al–O bond in silica-supported alkylaluminum(i) composites.^16–20 The long Al–O lengths for Al(1) and Al(4) centers may be ascribed to the lower electron cloud density located at the surface of the Al(i) cation, resulting in slightly longer bonds with the surrounding oxygen donors.^5,21 Moreover, the small distorted extents (sum((d_ij − d_ave)/d_ave)²/coordination number) of {Al(1)O₆} (3.86 × 10⁻⁴) and {Al(4)O₆} (1.89 × 10⁻³) indicate that they are in regular octahedral geometry. Moreover, another structural feature of Al₆{P₄Mo₆}₆ is that {Al^I(P₄Mo₆)₂} clusters are connected by bridging [Al(H₂O)₂]³⁺ cationic fragments (Al(2) and Al(3)), forming an unusual chain-like arrangement (Fig. 2a). It is worth noting that the 1-D chain contains a large repeating monomer with the maximum spacing of 81.69 Å, consisting of twelve Al-containing fragments ({–Al2–Al1–Al3–Al4–Al3–Al1–Al2–Al1–Al3–Al4–Al3–Al1–}). Such a long repeating monomer is rare. Each repeating monomer has two types of symmetric systems: Al(2) in the middle of the monomer plays a center of mirror symmetry and divides the whole repeating monomer into two equidistant half-units of {–Al1–Al3–Al4–Al3–Al1–}; Al(4) in each half-unit further acts as the reverse symmetric center of two {–Al3–Al1–Al2–} subunits. The two types of symmetrical systems form the infinitely extending chain-like structure in Al₆{P₄Mo₆}₆. Since bpe is a rigid and conjugated molecular structure, an effective π⋯π stacking interaction emerges and results in a honeycomb-like supramolecular organic moiety, which accommodates these 1-D inorganic chains and stabilizes the whole Al₆{P₄Mo₆}₆ framework (Fig. S3 and S4^†).Open in a separate windowFig. 2(a) One-dimensional (1D) inorganic structure in Al₆{P₄Mo₆}₆ with a length of repeating units of 81.69 Å, consisting of twelve Al-containing fragments ({–Al2–Al1–Al3–Al4–Al3–Al1–Al2–Al1–Al3–Al4–Al3–Al1–}). (b) Four kinds of coordination environments of {AlO₆} octahedra, respectively (i = 1 − x, y, 0.5 − z; ii = 0.5 − x, 1.5 − y, 1 − z).Al{P₄Mo₆}₂ has a similar structure to Al₆{P₄Mo₆}₆ (Table S4^†), wherein the most obvious difference is that {Al^I[P₄Mo₆]₂} clusters exist in isolated form and interact with the surrounding protonated bpe cations via hydrogen bonding to form into a 3-D supramolecular framework (Fig. S5 and S6^†). The different peripheral environment around the {Al^I[P₄Mo₆]₂} cluster can affect its acidity and catalytic activity.The solid-state ²⁷Al NMR spectrum of Al₆{P₄Mo₆}₆ depicts two distinct resonances at δ = −22.34 and 27.33 ppm due to the octahedrally coordinated Al^III and Al^I sites, respectively (Fig. 3a), indicating two types of Al local environments in Al₆{P₄Mo₆}₆. In contrast, Al{P₄Mo₆}₂ displays only one sharp signal at δ = 7.20 ppm due to the octahedrally coordinated Al^I sites (Fig. 3b). The observed narrow peak-width corresponds to the highly symmetric charge distribution at the aluminum nucleus, similar to the ferrocene analogue [(η⁵-Cp*)₂Al^I]⁺.⁵ Noticeably, Al^I resonance in Al₆{P₄Mo₆}₆ appears at a lower magnetic field compared to Al{P₄Mo₆}₂, due to the different peripheral environment around the hourglass {Al(P₄Mo₆)₂} cluster. XPS spectra of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ further affirm the valence states of Al and Mo elements (Fig. S7 and Table S5^†). The Al 2p XPS profile of Al₆{P₄Mo₆}₆ reveals two peaks at 74.39 and 73.75 eV ascribed to Al^III and Al^I, respectively (Fig. 3c). The area ratio of the two peaks is close to 1 : 1, in consistence with the chemical structure of Al₆{P₄Mo₆}₆. The high-resolution Al 2p XPS spectrum of Al{P₄Mo₆}₂ displays a weaker broad peak attributed to the low amount of Al⁺ (Fig. 3d). Moreover, the structural stabilities of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ were investigated by soaking them in water for 24 hours. Fig. S9–S11^† show the comparison of XRD, IR and XPS spectra of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ before and after soaking in water. It can be found that the characteristic diffraction peaks in XRD after soaking for 24 hours still show good agreement with the simulated data (Fig. S9^†). The characterized absorption bands in IR spectra also exhibit good match with the original Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ (Fig. S10^†). The XPS spectra of Al₆{P₄Mo₆}₆ after soaking in water were also obtained. There is basically no change in the high-resolution spectra of Al 2p with the Al^I/Al^III atomic ratios of ca. 1 : 1 (Fig. S11^†). The spectroscopic and theoretical observations verify that the low valence Al(i) species can stably exist in the reduced phosphomolybdates in the solid state (Fig. S12 and Table S6^†). Moreover, the acidities of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ were measured to be 0.27 and 0.442 mmol g⁻¹, respectively, demonstrating the promising potential of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ as dual-acid catalysts.Open in a separate windowFig. 3(a and b) ²⁷Al NMR spectra of solid Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂; (c and d) XPS spectra of Al in Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂.The catalytic performance of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ was evaluated via a solvent-free four-component domino reaction for the synthesis of pharmaceutical intermediate 1,5-benzodiazepine (Table 1). With Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ as catalysts, the yields of the final product 8aaa reach 83% and 75%, respectively (Table 1, entries 1 and 2). Almost no 8aaa is observed without the acid catalysts, even when the reaction is set for a long time (Table 1, entry 3). This clarifies the excellent catalytic performance of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂. Typical Brønsted acid p-TsOH and Lewis acid AlCl₃ as control samples yield only 43% and 29% 8aaa, respectively (Table 1, entries 4 and 5), much lower than those attained by Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂ catalysts. Moreover, (H₂en)₁₂[{Na_0.8K_0.2(H₂O)}₂{Na[Mo₆O₁₂(OH)₃(HPO₄)₂(PO₄)₂]₂}₂]·7H₂O^22,23 (abbr. {Na[P₄Mo₆]₂}) in contrast achieved 72% yield of 8aaa in 30 min, slower than that of Al₆{P₄Mo₆}₆ and Al{P₄Mo₆}₂. This indicates the advantage of the unique dual-acid features of Al(i)-stabilized reduced phosphomolybdate clusters with multiple Lewis and Brønsted acid active centers, in which the synergistic effect between the Al species and reduced phosphomolybdate cluster contributes to the catalytic activity.Comparison tests of one-pot synthesis of 1,5-benzodiazepine 8aaavia a four-component domino reaction^a

A theoretical study of bond selective photochemistry in CH2BrI

Bromoiodomethane photodissociation in the low-lying excited states has been characterized using unrestricted Hartree-Fock, configuration-interaction-singles, and complete active space self-consistent field calculations with the SDB-aug-cc-pVTZ, aug-cc-pVTZ, and 3-21g** basis sets. According to the results of the vertical excited energies and oscillator strengths of these low-lying excited states, bond selectivity is predicted. Subsequently, the minimum energy paths of the first excited singlet state and the third excited state for the dissociation reactions were calculated using the complete active space self-consistent field method with 3-21g** basis set. Good agreement is found between the calculations and experimental data. The relationships of excitations, the electronic structures at Franck-Condon points, and bond selectivity are discussed.     

Swelling behavior of ionically cross-linked polyampholytic hydrogels in varied salt solutions

Ionically cross-linked polyampholytic hydrogels were synthesized by redox copolymerization of acrylamide and an ionic complex of (N,N-diethylamino)ethyl methacrylate and acrylic acid (designated as PADA hydrogel). The swelling behavior of the hydrogels in water indicated that a minimal equilibrium swelling ratio is found when the molar ratio of anionic/cationic monomers was 1.55. In NaCl solution, the hydrogels exhibited the typical swelling behavior of conventional polyampholytic gels. Their equilibrium swelling ratios increased with an increase in the NaCl concentration. In solutions of multivalent ions (CaCl₂ and trisodium citrate solutions), the equilibrium swelling ratios of the hydrogels increased first and were then followed by a decrease with an increase in salt concentration. Interestingly, an unexpected abrupt swelling phenomenon was observed when the fully swollen hydrogels in salt solution were transmitted to pure water. The unique swelling behavior of PADA hydrogels depends not only on the molar ratio of the anionic/cationic monomers but also on the valency of the ions.     

(C2H10N2)[BPO4F2] — Structural Relations between [BPO4F2]2— and [Si2O6]4—

(C₂H₁₀N₂)[BPO₄F₂] — Strukturbeziehungen zwischen [BPO₄F₂]^2— und [Si₂O₆]^4— Colourless crystals of (C₂H₁₀N₂)[BPO₄F₂] were prepared from mixture of ethylendiamine, H₃BO₃, BF₃ · C₂H₅NH₂, H₃PO₄ and HCl under mild hydrothermal conditions (220 °C). The crystal structure was determined by single crystal methods (triclinic, P1¯ (no. 2), a = 451.85(5) pm, b = 710.20(8) pm, c = 1210.2(2) pm, α = 86.08(1)°, β = 88.52(2)°, γ = 71.74(1)°, Z = 2) and contains infinite tetrahedral zweier‐single‐chains {[BPO₄F₂]^2—} which are isoelectronic (48e^—) with the polyanions {[Si₂O₆]^4—} of the pyroxene family.     

Cyclic Voltammograms of Ferrocene on Multi‐Walled Carbon Nanotubes (MWCNTs)‐Modified Edge Plane Pyrolytic Graphite (EPPG) Electrode in Room Temperature Ionic Liquids (RTILs) of 1‐Ethyl‐3‐Methylimidazolium Tetrafluoroborate (EMIBF4)

In this work, the electrochemical behavior of ferrocene (Fc) was investigated by cyclic voltammetry (CV) in room temperature ionic liquids (RTILs) of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄) on glass carbon (GC), edge plane pyrolytic graphite (EPPG) and multi‐walled carbon nanotube (MWCNTs)‐modified EPPG electrodes, respectively. The results demonstrated that on GC electrode, pairs of well‐defined reversible peaks were observed, while for the electrode of EPPG, the peak potential separation (ΔE_p) is obviously larger than the theoretical value of 59 mV, hinting that the electrode of EPPG is distinguished from the commonly used electrode, consistent with the previous proposition that EPPG has many “defects”. To obtain an improved electrochemical response, multi‐walled carbon nanotubes (MWCNTs) were modified on the electrode of EPPG; the increased peak current and promoted peak potential separation not only proved the existence of “defects” in MWCNTs, but also supported that “creating active points” on an electrode is the main contribution of MWCNTs. Initiating the electrochemical research of Fc on the MWCNTs‐modified EPPG electrode in RTILs and verifying the presence of “defects” on both EPPG and MWCNTs using cyclic voltammograms (CVs) of Fc obtained in RTILs of EMIBF₄, is the main contribution of this preliminary work.     

Aza-Morita-Baylis-Hillman reactions of N-(benzylidene)polyfluoroanilines with methyl acrylate and acrylonitrile

Aza-Morita-Baylis-Hillman reactions of N-(benzylidene)polyfluoroanilines 1 with methyl acrylate or acrylonitrile were studied. It was found that Lewis base, solvent and reaction temperature can significantly affect the reaction. Using 3-hydroxyquinuclidine (3-HQD) as a Lewis base in the reactions of 1 with methyl acrylate in DMF, the normal aza-Morita-Baylis-Hillman adducts 3 were formed in moderate to excellent yields. For the reactions of 1 with acrylonitrile, 1,4-diazabicyclo[2.2.2]octane (DABCO) is the best Lewis base giving the corresponding aza-Morita-Baylis-Hillman adducts 4 as the sole product in good to moderate yield. However, upon treatment of 1 with acrolein 2c, the corresponding reaction did not occur even in the presence of a variety of catalysts.     

Studies of synergism for lowering dynamic interfacial tension in sodium alpha-(n-alkyl) naphthalene sulfonate/alkali/acidic oil systems

Alkylnaphthalene sulfonates with high purity were selected as model components to research synergism for lowering interfacial tension (IFT) in surfactant/alkali/acidic oil systems. The dynamic IFTs between alkylnaphthalene sulfonates with different alkyl chain length and n-decane, oleic acid model oil, or Shengli crude oil were measured. The results showed that the alkylnaphthalene sulfonates with different alkyl chain lengths had different synergism with different acidic components and their ionized acids under the same conditions. The synergism for lowering dynamic IFT in alkylnaphthalene sulfonate/alkali/acidic oil systems was controlled by alkylnaphthalene sulfonate concentration, alkyl chain length, alkali concentration, alkali type, and oleic acid concentration: optimal physicochemical conditions were necessary to the best synergism. This indicates that the synergism among added surfactant acidic components in crude oil and their ionized acids is controlled by the ratio of their interfacial concentrations.