Highly stable olefin-Cu(I) coordination oligomers and polymers

Highly stable Cu(I)-olefin coordination oligomers and polymers have been successfully prepared and applied to construct metal-organic frameworks (MOFs) with interesting physical and chemical functions in recent years. In this review, we present the olefin-Cu(I) coordination oligomers and polymers and their novel physical properties. From structure to functions, particular emphasis is placed on the coordination and organometallic chemistry of olefin-Cu(I) coordination oligomers and polymers, their structures and potential applications as solids possessing unusual physical functional properties such as electrochemical, chiral separation, fluorescent sensing and ferroelectricity.     

Vapor-liquid and vapor-solid phase equilibria for united-atom benzene models near their triple points: the importance of quadrupolar interactions

Gibbs ensemble Monte Carlo simulations were used to calculate the vapor-liquid and vapor-solid coexistence curves for benzene using two simple united-atom models. An extension of the Gibbs ensemble method that makes use of an elongated box containing a slab of the condensed phase with a vapor phase along one axis was employed for the simulations of the vapor-solid equilibria and the vapor-liquid equilibria at very low reduced temperatures. Configurational-bias and aggregation-volume-bias Monte Carlo techniques were applied to improve the sampling of particle transfers between the two simulation boxes and between the vapor and condensed-phase regions of the elongated box. An isotropic united-atom representation with six Lennard-Jones sites at the positions of the carbon atoms was used for both force fields, but one model contained three additional out-of-plane partial charge sites to explicitly represent benzene's quadrupolar interactions. Both models were fitted to reproduce the critical temperature and density of benzene and yield a fair representation of the vapor-liquid coexistence curve. In contrast, differences between the models are very large for the vapor-solid coexistence curve. In particular, the lack of explicit quadrupolar interactions for the 6-site model greatly reduces the energetic differences between liquid and solid phases, and this model yields a triple point temperature that is about a factor of 2 too low. In contrast, the 9-site model predicts a triple point of benzene at T = 253 +/- 6 K and p = 2.3 +/- 0.8 kPa in satisfactory agreement with the experimental data (T = 278.7 K and p = 4.785 kPa).     

Copper-catalyzed arylation of amines using diphenyl pyrrolidine-2-phosphonate as the new ligand

[Chemical reaction: See text] We have developed a general, efficient, and inexpensive catalyst system for arylation of amines by using 10 mol % of CuI as the copper source, 20 mol % of diphenyl pyrrolidine-2-phosphonate (DPP) as the ligand, K3PO4 as the base, and DMF containing 2% water (v/v) as the solvent.     

用EXAFS研究NiO在γ-Al2O3表面上的分散

本文使用EXAFS方法研究NiO在γ-Al_2O_3的表面上的分散情况。文章讨论了Ni含量为7%、13%、18%、26%、35%的NiO/γ-Al_2O_3体系的径向结构函数图以及Ni含量为13%、26%的NiO/α-Al_2O_3样品的径向结构函数图,认为NiO能在γ-Al_2O_3表面上成单层分散。分散后的Ni-O距离接近NiO晶体的Ni-O距离,表明Ni离子和γ-Al_2O_3表面上的氧有很强的相互作用。     

Reversed-phase HPLC determination of Co(II), Ni(II) and Fe(III) as their 2-(2-thiazolylazo)-5-dimethylaminophenol chelates

The optimum chromatographic separation conditions for Co(II), Ni(II), and Fe(III) chelates with 2-(2-thiazolylazo)-5-dimethylaminophenol (TAM) were investigated. The compositions of chelates were also determined by the HPLC method and thus the possible structure of chelates was given. A precolumn derivatization method was used, followed by separation on an octyl-bonded silica stationary phase with a methanol-tetrahydrofuran-water (40:9:51, v/v/v) mobile phase containing pH 5.8 acetate buffer and 1 x 10(-4)M TAM. The detection limits of Co(II), Ni(II), and Fe(III) at 560 nm are 0.03, 0.02 and 0.1 ng (S N = 2 ), respectively. They can be determined by means of the proposed method without interference from other common metal ions and have been determined in five standard alloys with satisfactory results.     

Liquid chromatographic analysis of nucleosides and their mono-, di- and triphosphates using porous graphitic carbon stationary phase coupled with electrospray mass spectrometry

Analysis of nucleosides and nucleotides is desirable in many biological studies, but the task is analytically challenging due to the high polarity of the analytes. In this study, resolution of mixtures containing nucleosides and their mono-, di- and triphosphates was achieved using a porous graphitic carbon (PGC) stationary phase, Hypercarb, under conditions suitable for liquid chromatography/mass spectrometry (LC/MS). Different organic mobile phases and modifiers were evaluated and the separation of 16 nucleosides and nucleotides was optimized using gradient elution with a water/acetonitrile mobile phase containing ammonium acetate and diethylamine as modifiers. The ammonium acetate concentration proved to be critical for retention and diethylamine was found to improve the peak shapes of di- and triphosphates for mass spectrometric detection. A variety of silica-based columns designed for polar compound separation were also tested using optimized LC conditions and compared with results obtained with the Hypercarb column. Only the Hypercarb column provided separations suitable for accurate quantitation of mixed nucleosides and their phosphates.     

乙醇和甲苯组成的最低共沸混合物热力学性质的研究

The molar heat capacity of the azeotropic mixture composed of ethanol and toluene was measured by a high precision adiabatic calorimeter from 80 to 320 K. The glass transition and phase transitions of the azeotropic mixture were determined based on the heat capacity measurements. A glass transition at 103.350 K was found. A solid-solid phase transition at 127.282 K, two solid-liquid phase transitions at 153.612 and 160.584 K were observed, which correspond to the transition of metastable crystal to stable crystal of ethanol and the melting of ethanol and toluene, respectively. The thermodynamic functions and the excess ones of the mixture relative to the standard temperature 298.15 K were derived based on the relationships of the thermodynamic functions and the function of the measured heat capacity with respect to temperature.     

Competitive adsorption of Pb2+, Cu2+, and Cd2+ ions on microporous titanosilicate ETS-10

In the present study, the competitive adsorption characteristics of binary and ternary heavy metal ions Pb2+, Cu2+, and Cd2+ on microporous titanosilicate ETS-10 were investigated in batch systems. Pure microporous titanosilicate ETS-10 was synthesized with P25 as the Ti source and characterized by the techniques of X-ray diffraction (XRD), field emission-scanning electron microscope (FESEM), nitrogen adsorption, and zeta-potential. Equilibrium and kinetic adsorption data showed that ETS-10 displays a high selectivity toward one metal in a two-component or a three-component system with an affinity order of Pb2+ > Cd2+ > Cu2+. The equilibrium behaviors of heavy metals species with stronger affinity toward ETS-10 can be described by the Langmuir equation while the adsorption kinetics of the metals can be well fitted to a pseudo-second-order (PSO) model.     

Detection of paracetamol by capillary electrophoresis with chemiluminescence detection

Indirect detection of paracetamol was accomplished using a capillary electrophoresis-chemiluminescence (CE-CL) detection system, which was based on its inhibitory effect on a luminol-potassium hexacyanoferrate(III) (K₃[Fe(CN)₆]) CL reaction. Paracetamol migrated in the separation capillary, where it mixed with luminol included in the running buffer. The separation capillary outlet was inserted into the reaction capillary to reach the detection window. A four-way plexiglass joint held the separation capillary and the reaction capillary in place. K₃[Fe(CN)₆] solution was siphoned into a tee and flowed down to the detection window. CL was observed at the tip of the separation capillary outlet. The CL reaction of K₃[Fe(CN)₆] oxidized luminol was employed to provide the high and constant background. Since paracetamol inhibits the CL reaction, an inverted paracetamol peak can be detected, and the degree of CL suppression is proportional to the paracetamol concentration. Maximum CL signal was observed with an electrophoretic buffer of 30 mM sodium borate (pH 9.4) containing 0.5 mM luminol and an oxidizer solution of 0.8 mM K₃[Fe(CN)₆] in 100 mM NaOH solution. Under the optimal conditions, a linear range from 6.6 × 10⁻¹⁰ to 6.6 × 10⁻⁸ M (r = 0.9999), and a detection limit of 5.6 × 10⁻¹⁰ M (signal-to-noise ratio = 3) for paracetamol were achieved. The relative standard deviation (R.S.D.) of the peak area for 5.0 × 10⁻⁹ M of paracetamol (n = 11) was 2.9%. The applicability of the method for the analysis of pharmaceutical and biological samples was examined.     

Hydrothermal synthesis and structural characterization of three inorganic–organic composite sandwich-type phosphotungstates

Three inorganic–organic composite sandwich-type phosphotungstates [Ni(tepa)(H₂O)]₄H₂[Ni₄(H₂O)₂(α-B-PW₉O₃₄)₂]·8H₂O (1), (enH₂)₃[Ni₂(H₂O)₁₀][Ni₄(H₂O)₂(α-B-PW₉O₃₄)₂]·en·8H₂O (2) and (enH₂)₁₀[Mn₄(H₂O)₂(α-B-PW₉O₃₄)₂]₂·20H₂O (3) (tepa=tetraethylenepentamine and en=ethylenediamine) have been synthesized by the hydrothermal reaction of the trivacant Keggin polyoxoanion [α-A-PW₉O₃₄]⁹⁻ with Ni²⁺ or Mn²⁺ ions in the presence of tepa or en and structurally characterized by IR spectra, elemental analysis, thermogravimetric analysis and variable temperature magnetic susceptibility. X-ray crystallographic analyses indicate that they all contain the classical tetra-M sandwiched polyoxoanions [M₄(H₂O)₂(α-B-PW₉O₃₄)₂]¹⁰⁻ (M=Ni²⁺ or Mn²⁺) and nickel-organoamine cations or organoamine cations work as the charge balance ions. The tetra-M clusters in 1, 2 and 3 exhibit the familiar structural type of a β-junction at the sites of metal incorporation. The study of magnetic property of 1 is indicative of a typical ferromagnetic coupling between Ni²⁺ cations.