Influence of acid treatments of carbon nanotube precursors on Ni/CNT in the synthesis of carbon nanotubes

The Ni/CNT catalyst was fabricated by directly dipping carbon nanotube precursors refluxed in 4 M of nitric acid into Ni electroless plating bath, and used to synthesize new carbon nanotubes. The experimental results indicate that the duration of acid-treatment of carbon nanotubes precursors exerts a great influence on the catalysis of Ni/CNT in the synthesis of carbon nanotubes and hence the structures of the new carbon nanotubes. When the carbon nanotubes precursors were refluxed for 0.5 h in 4 M of nitric acid, bamboo-shaped carbon nanotubes (BSCNT) or Y junction carbon nanotubes in the carbon products were obtained. As the duration of acid-treatment of carbon nanotubes precursors increased to 6 h, the as-prepared Ni/CNT displayed higher activity, and the carbon nanotube products were high pure without any Y junction structure or any separation layers in hollow.     

Integral equation theory for atactic polystyrene melt with a coarse-grained model

In this work, an integral equation approach to investigate the atactic polystyrene (aPS) melt based on polymer reference interaction site model (PRISM) theory is proposed. The intramolecular structure factors, required as input to PRISM theory, are obtained from the semiflexible chain model. With a novel coarse-graining procedure and the explicit-atom molecular-dynamics (MD) simulations for aPS, the parameters needed for the coarse-grained model are obtained by using an automatic simplex optimization. These parameters can be used to describe the structure and thermodynamic properties of the complex aPS melt and good agreement is obtained between the theory and MD simulations. The proposed integral equation approach provides a basis for describing the structure and properties of PS nanocomposites where the application of molecular simulation is difficult.     

铜(Ⅱ)-三氮唑偶氮络合物与脱氧核糖核酸相互作用的电化学行为

运用电化学方法研究了铜（Ⅱ）－三氮唑偶氮（2－[2,3,5-三氮唑偶氮]-5－二甲氨基苯甲酸，TZAMB）络合物与脱氧核糖核酸（DAN）的相互作用。在pH2.5(0.05mol/L）邻苯二甲酸氢钾（PBS）缓冲溶液中，DNA与Cu(Ⅱ）－TZAMB络合物形成一种电惰性结合物，使Cu（Ⅱ）－TZAMB络合物的还原峰电流减小。通过循环伏安法、盐效应以及紫外－可见吸收谱证实了是由Cu(Ⅱ）－TZAMB络合物与DNA形成一种插入式的电惰性结合物而使其峰电流下降。根据这种峰电流下降可以测定DNA，测定结果令人满意。     

钨砷杂多阴离子[KAs4W40O140(M·H2O)2]n-中配位水的取代反应

本文报道了[KAs_4W_(40)O_(140)(M·H_2O_2]~(n-)杂多阴离子中配位水的取代反应.在水溶液中,许多配体,如[Fe(CN)_6]~(4-)、[Fe(CN)_6]~(3-),SO_3~(2-)等都能取代配位水形成具有特征颜色的配离子.在水溶液中不能发生的配体取代配位水的反应,在非极性有机溶剂中却容易发生,这与配位水分子在非极性有机溶剂中易脱去形成配位不饱和态有关.     

Further Daphniphyllum Alkaloids from the Leaves of Daphniphyllum macropodum Miq.

Five new polycyclic Daphniphyllum alkaloids, macropodumines F ( 1 ) and G ( 2 ), 17‐oxoyuzurimine ( 3 ), and macropodumines H ( 4 ) and I ( 5 ), were isolated from the leaves of D. macropodum Miq ., collected in Sichuan Province, China. The structures and relative configurations of the new compounds – as well as of four known, related alkaloids – were elucidated on the basis of in‐depth spectroscopic and mass‐spectrometric analyses, by chemical derivatization, and by comparison of spectroscopic data with those of known compounds.     

Density functionals for inorganometallic and organometallic chemistry

We present a database of 21 bond dissociation energies for breaking metal-ligand bonds. The molecules in the metal-ligand bond energy database are AgH, CoH, CoO+, CoOH+, CrCH3+, CuOH2+, FeH, Fe(CO)5, FeO, FeS, LiCl, LiO, MgO, MnCH3NiCH2+, Ni(CO)4, RhC, VCO+, VO, and VS. We have also created databases of metal-ligand bond lengths and atomic ionization potentials. The molecules used for bond lengths are AgH, BeO, CoH, CoO+, FeH, FeO, FeS, LiCl, LiO, MgO, RhC, VO, and VS and the ionization potentials are for the following atoms: C, Co, Cr, Cu, Ni, O, and V. The data were chosen based on their diversity and expected reliability, and they are used along with three previously developed databases (transition metal dimer bond energies and bond lengths and main-group molecular atomization energies) for assessing the accuracy of several kinds of density functionals. In particular, we report tests for 42 previously defined functionals: 2 local spin density approximation (LSDA) functionals, 14 generalized gradient approximation (GGA) methods, 13 hybrid GGA methods, 7 meta GGA methods, and 8 hybrid meta GGA methods. In addition to these functionals, we also examine the effectiveness of scaling the correlation energy by testing 13 functionals with scaled or no gradient-corrected correlation energy, and we find that functionals of this kind are more accurate for metal-metal and metal-ligand bonds than any of the functionals already in the literature. We also present a readjusted GGA and a hybrid GGA with parameters adjusted for metals. When we consider these 57 functionals for metal-ligand and metal-metal bond energies simultaneously with main-group atomization energies, atomic ionization potentials, and bond lengths we find that the most accurate functional is G96LYP, followed closely by MPWLYP1M (new in this article), XLYP, BLYP, and MOHLYP (also new in this article). Four of these five functionals have no Hartree-Fock exchange, and the other has only 5%. As a byproduct of this work we introduce a convenient diagnostic, called the B1 diagnostic, for ascertaining the multireference character in a bond.     

Mitigation of Jahn–Teller distortion and Na+/vacancy ordering in a distorted manganese oxide cathode material by Li substitution

Layered manganese-based oxides are promising candidates as cathode materials for sodium-ion batteries (SIBs) due to their low cost and high specific capacity. However, the Jahn–Teller distortion from high-spin Mn³⁺ induces detrimental lattice strain and severe structural degradation during sodiation and desodiation. Herein, lithium is introduced to partially substitute manganese ions to form distorted P′2-Na_0.67Li_0.05Mn_0.95O₂, which leads to restrained anisotropic change of Mn–O bond lengths and reinforced bond strength in the [MnO₆] octahedra by mitigation of Jahn–Teller distortion and contraction of MnO₂ layers. This ensures the structural stability during charge and discharge of P′2-Na_0.67Li_0.05Mn_0.95O₂ and Na⁺/vacancy disordering for facile Na⁺ diffusion in the Na layers with a low activation energy barrier of ∼0.53 eV. It exhibits a high specific capacity of 192.2 mA h g⁻¹, good cycling stability (90.3% capacity retention after 100 cycles) and superior rate capability (118.5 mA h g⁻¹ at 1.0 A g⁻¹), as well as smooth charge/discharge profiles. This strategy is effective to tune the crystal structure of layered oxide cathodes for SIBs with high performance.

Li-Substitution in P′2-Na_0.67MnO₂ mitigates the anisotropic change of Mn–O bonds and Na/vacancy ordering, and hence significantly promotes its cycling stability and rate capability as a cathode material for sodium-ion batteries.     

Lignocellulosic biomass for bioethanol: Recent advances,technology trends,and barriers to industrial development

1. Download : Download high-res image (214KB)
2. Download : Download full-size image

     

Mechanism of beta-hydrogen elimination from square planar iridium(I) alkoxide complexes with labile dative ligands

Mechanistic studies were conducted on beta-hydrogen elimination from complexes of the general formula [Ir(CO)(PPh(3))(2)(OR)], which are square planar alkoxo complexes with labile ligands. The dependence of rate, isotope effect, and alkoxide racemization on phosphine concentration revealed unusually detailed information on the reaction pathway. The alkoxo complexes were remarkably stable, including those with a variety of electronically and sterically distinct groups at the beta-carbon. These complexes were much more stable than the corresponding alkyl complexes. Thermolysis of these complexes in the presence of PPh(3) yielded the iridium hydride [Ir(CO)(PPh(3))(3)H] and the corresponding aldehyde or ketone with rate constants that were affected little by the groups at the beta-carbon. The reactions were first order in iridium complexes. At low [PPh(3)], the reaction rate was nearly zero order in PPh(3), but reactions at high [PPh(3)] revealed an inverse dependence of reaction rate on PPh(3). The rate constants were similar in toluene, THF, and chlorobenzene. The y-intercept of a 1/k(obs) vs [PPh(3)] plot displayed a primary isotope effect, indicating that the y-intercept did not simply correspond to phosphine dissociation. These data and a dependence of alkoxide racemization on [PPh(3)] showed that the elementary beta-hydrogen elimination step was reversible. A mechanism involving reversible beta-hydrogen elimination followed by associative displacement of the coordinated ketone or aldehyde by PPh(3) was consistent with all of our data. This mechanism stands in contrast with the pathways proposed recently for alkoxide beta-hydrogen elimination involving direct elimination, protic catalysts, or binuclear mechanisms and shows that alkoxide elimination can follow pathways similar to those for beta-hydrogen elimination from alkyl complexes.     

STRUCTURE CHARACTERIZATION AND CATALYTICACTIVITY TEST OF Ni(II) COMPLEXES CONTAINING2-(DIPHENYLPHOSPHINOAMINO) PYRIDINE(PAP)

IntroductionIn1962,N.V.Kutepow'SgroupfirstusedcomplexesofFe,CoandNiascatalyststocatalyzecarboXylationofethanoltopreparepropanoicacidanditsderivants.Thereactionpressurewashighandtheyieldwaslow.LateronPaulalsandhiscolleagueusedabC13andiodineascatalyst,which…