Semiclassical Trajectory Studies of Reactive and Nonreactive Scattering of OH(A 2Σ+) by H2 Based on an Improved Full-Dimensional Ab Initio Diabatic Potential Energy Matrix

We present a new full-dimensional diabatic potential energy matrix (DPEM) for electronically nonadiabatic collisions of OH(A ²Σ⁺) with H₂, and we calculate the probabilities of electronically adiabatic inelastic collisions, nonreactive quenching, and reactive quenching to form H₂O+H. The DPEM was fitted using a many-body expansion with permutationally invariant polynomials in bond-order functions to represent the many-body part. The dynamics calculations were carried out with the fewest-switches with time uncertainty and stochastic decoherence (FSTU/SD) semiclassical trajectory method. We present results both for head-on collisions (impact parameter b equal to zero) and for a full range of impact parameters. The results are compared to experiment and to earlier FSTU/SD and quantum dynamics calculations with a previously published DPEM. The various theoretical results all agree that nonreactive quenching dominates reactive quenching, but there are quantitative differences between the two DPEMs and between the b=0 results and the all-b results, especially for the probability of reactive quenching.     

High-performance liquid chromatography quantitative analysis of ephedrine alkaloids in Ephedrae Herba on a perfluorooctyl stationary phase

Ephedrae Herba is one of the most commonly used herbal medicines, and it has been shown that most of the clinical efficacy for cold and asthma is exerted by its alkaloidal components. A simple and sensitive high-performance liquid chromatography method was developed using a perfluorooctyl column for the simultaneous determination of five alkaloids (norephedrine, norpseudoephedrine, ephedrine, pseudoephedrine, and methylephedrine) in Ephedrae Herba. The mobile phase comprising acetonitrile and 15 mM ammonium trifluoroacetate was used to elute the targets in isocratic elution mode. The method was validated for linearity (R² > 0.999), repeatability, intraday and interday precision, recoveries with trueness (93.87–110.99%), limits of detection (5.35–5.76 µg/mL), and limits of quantification (20 µg/mL). The quantitative results revealed that the developed method was precise and accurate. Then it was successfully applied to determine the difference in the contents of three batches of Ephedrae Herba from three pharmaceutical companies.     

The Comparative Study of Reaction Mechanisms and Catalytic Performances of Cu–SSZ-13 and Fe–SSZ-13 for the NH3-SCR Reaction

Catalysis Surveys from Asia - The catalytic performances and mechanism differences of model catalysts Cu–SSZ-13 and Fe–SSZ-13 with similar metal content and Si/Al ratio were compared....     

基于氮掺杂活性炭催化氧化合成氮甲基氧化吗啉的研究

以三聚氰胺为氮源,商用活性炭为研究对象,通过“浸渍吸附+高温热处理”的方式制得系列氮掺杂活性炭,并用于催化氧化合成氮甲基氧化吗啉（NMMO）。采用N₂吸附/脱附、Raman、XPS等对氮掺杂活性炭的孔结构和表面性质进行了表征。结果表明：随着三聚氰胺负载量的增大,氮掺杂活性炭的表面碱性含氮官能团含量增大,进而体现出更好的催化氧化合成NMMO活性。最佳催化剂（ACO850-20N）在催化剂加量为0.02 wt%,反应温度70 ℃和反应时间4 h的工艺条件下,氮甲基吗啉的转化率和NMMO收率可达99.76%和94.31%。      

Spatiotemporally-regulated multienzymatic polymerization endows hydrogel continuous gradient and spontaneous actuation

There are several natural materials which have evolved functional gradients,ingeniously attaining maximal efficacy from limited components.Herein,we utilized the spatiotemporal distribution of initiator acetylacetone to regulate the multienzyme polymerization and fabricate a chitosan-polymer hydrogel.The temporal priority order of acetylacetone was higher than phenolmodified chitosan by density functional theory calculation.The acetylacetone within the gelatin could gradually diffuse spatially into the chitosan hydrogel to fabricate the composite hydrogel with gradient network structure.The gradient hydrogel possessed a transferring topography from the two-dimensional pattern.A continuously decreased modulus along with acetylacetone diffusion was confirmed by atomic force microscope-based force mapping experiment.The water-retaining ability of various regions was confirmed by low-field nuclear magnetic resonance(NMR)and thermogravimetric analysis(TG)analysis,which led to the spontaneous actuation of gradient hydrogel with maximum 1821°/h curling speed and 227°curling angle.Consequently,the promising gradient hydrogels could be applied as intelligent actuators and flexible robots.     

A sensitive and selective HPLC–MS3 method for therapeutic drug monitoring of meropenem and its validation by comparison with HPLC–MS2 methods

Meropenem, a representative β-lactam antibiotic, is widely used to treat complicated and serious infections. Therefore, it is of great significance to monitor the plasma drug concentration for individualized antimicrobial therapy. This study first describes the development and validation of high-performance liquid chromatography–tandem mass spectrometry cubed method for monitoring meropenem in human plasma. Protein precipitation with methanol and a chromatographic analysis time of 7 min make this method simple and of high throughput. Meropenem was extracted from human plasma with recoveries >94.1%. Calibration curves were linear (R² > 0.995) in the concentration range of 0.5–50 μg/mL. Overall accuracy and precision did not exceed 8.0% as well as no significant matrix effect was observed. The novelty of this method is that the triple-stage mass spectrometry technology improves the selectivity and sensitivity. A comparison of the presented method and traditional liquid chromatography–tandem mass spectrometry method was assessed in 44 patients treated with meropenem and Passing–Bablok regression coefficients and Bland–Altman plots showed that no significant difference between the two methods. So the triple-stage mass spectrometry method developed in this study is appropriate and practical for the monitor of meropenem in the daily clinical laboratory practice.     

Enhanced Crystal Quality of Perovskite via Protonated Graphitic Carbon Nitride Added in Carbon-Based Perovskite Solar Cells

The quality of perovskite layers has a great impact on the performance of perovskite solar cells (PSCs). However, defects and related trap sites are generated inevitably in the solution-processed polycrystalline perovskite films. It is meaningful to reduce and passivate the defect states by incorporating additive into the perovskite layer to improve perovskite crystallization. Here an environmental friendly 2D nanomaterial protonated graphitic carbon nitride (p-g-C\begin{document}$_3$\end{document}N\begin{document}$_4$\end{document}) was successfully synthesized and doped into perovskite layer of carbon-based PSCs. The addition of p-g-C\begin{document}$_3$\end{document}N\begin{document}$_4$\end{document} into perovskite precursor solution not only adjusts nucleation and growth rate of methylammonium lead tri-iodide (MAPbI\begin{document}$_3$\end{document}) crystal for obtaining flat perovskite surface with larger grain size, but also reduces intrinsic defects of perovskite layer. It is found that the p-g-C\begin{document}$_3$\end{document}N\begin{document}$_4$\end{document} locates at the perovskite core, and the active groups -NH\begin{document}$_2$\end{document}/NH\begin{document}$_3$\end{document} and NH have a hydrogen bond strengthening, which effectively passivates electron traps and enhances the crystal quality of perovskite. As a result, a higher power conversion efficiency of 6.61% is achieved, compared with that doped with g-C\begin{document}$_3$\end{document}N\begin{document}$_4$\end{document} (5.93%) and undoped one (4.48%). This work demonstrates a simple method to modify the perovskite film by doping new modified additives and develops a low-cost preparation for carbon-based PSCs.     

Cu2O-Catalyzed Conversion of Benzyl Alcohols Into Aromatic Nitriles via the Complete Cleavage of the C≡N Triple Bond in the Cyanide Anion

Nitrogen transfer from cyanide anion to an aldehyde is emerging as a promising method for the synthesis of aromatic nitriles. However, this method still suffers from a disadvantage that a use of stoichiometric Cu(II) or Cu(I) salts is required to enable the reaction. As we report herein, we overcame this drawback and developed a catalytic method for nitrogen transfer from cyanide anion to an alcohol via the complete cleavage of the C≡N triple bond using phen/Cu₂O as the catalyst. The present condition allowed a series of benzyl alcohols to be smoothly converted into aromatic nitriles in moderate to high yields. In addition, the present method could be extended to the conversion of cinnamic alcohol to 3-phenylacrylonitrile.     

Low percolation conductive graphite flakes-filled poly(urethane-imide) composites with high thermal stability via imidization self-foaming structure

In the study, the conductive graphite flakes filled poly(urethane-imide) composites (PUI/GFs) with high performance were constructed by the thermal imidization self-foaming reaction. It was found that the foaming action could promote the redistribution of GFs during curing process and the formation of stable linear conductive pathways. The percolation threshold of PUI/GFs composites was lowered from 1.26 wt% (2000 mesh GFs) or 0.86 wt% (1000 mesh GFs) to 0.79 wt% (500 mesh GFs), which were relatively low percolation thresholds for polymer/GFs composites so far. When the content of 500 mesh GFs was 4.0 wt%, the electrical conductivity of the composite was as high as 3.96 × 10^?1 S/m. Also, a poly(urethane-imide) (PUI) matrix with excellent thermal stability (T_d10%: 334.97 °C) and mechanical properties (elongation at break: 324.52%, tensile strength: 15.88 MPa) was obtained by introducing the rigid aromatic heterocycle into the polyurethane (PU) hard segments. Moreover, the zero temperature coefficient of resistivity for the composites was observed at the temperature range from 30 °C to 200 °C. Consequently, PUI/GFs composites may provide the novel strategy for considerable conductive materials with high thermal stability in electrical conductivity.     

The Effect of Oleic Acid Emulsification using SPE on Fluorite and Dolomite Flotation**

Collector OA, oleic acid, is widely used industrially for fluorite flotation. Low selectivity, dispersibility and collecting capability of the OA collector are always observed. In this study, compared with flotation of dolomite, a collector mixture of OA and SPE (styrylphenol polyoxyethylene ether) demonstrated significantly better performances for the fluorite. An optimal mass ratio 4 : 1 OA : SPE was found, and the recovery of fluorite was increased from over 85 % to more than 94 % compared with pure OA. Furthermore, the dosage of the collector agent was reduced from 50 mg mL⁻¹ to 20 mg mL⁻¹, which did not negatively impact the recovery of dolomite. The results from the contact angle tests indicated that SPE selectively increased the surface hydrophobicity of fluorite but had little effect on dolomite. Besides, zeta potential measurements and IR analyses revealed that the addition of SPE led to strong chemical adsorption on the surface of fluorite, resulting in a significant difference in the flotation performances of the two minerals. Therefore, SPE-emulsified OA is corroborated to prompt more selectivity and collecting capability on flotation of fluorite over dolomite.