Axisymmetric frictionless contact of functionally graded materials

The main interest of this study is a new method to solve the axisymmetric frictionless contact problem of functionally graded materials (FGMs). Based on the fact that an arbitrary curve can be approached by a series of continuous but piecewise linear curves, the FGM is divided into a series of sub-layers with shear modulus varying linearly in each sub-layer and continuous at the sub-interfaces. With this model, the axisymmetric frictionless contact problem of a functionally graded coated half-space is investigated. By using the transfer matrix method and Hankel integral transform technique, the problem is reduced to a Cauchy singular integral equation. The contact pressure, contact region and indentation are calculated for various indenters by solving the equations numerically. An erratum to this article can be found at     

Terahertz wave tomographic imaging with a Fresnel lens

We demonstrate three-dimensional tomographic imaging using a Fresnel lens with broadband terahertzpulses.Objects at various locations along the beam propagation path are uniquely imaged on the sameimaging plane using a Fresnel lens with different frequencies of the imaging beam.This procedure allowsthe reconstruction of an object's tomographic contrast image by assembling the frequency-dependentimages.     

企业信息化中的网络存储整合应用

首先介绍了网络存储技术中NAS技术和SAN技术的基本原理,并对两者的特性进行了比较;然后详细介绍了企业信息化过程中网络存储整合的一个典型案例,分析了其整合前存在的不足,制定有效的整合实施方案,并对实施过程中许多关键技术部分进行了阐述,最终很好的达到了预定目标;最后总结了网络存储整合需要规划多种技术相融合的必要性.     

成像光谱技术发展的科学背景和现状

本文分析与阐述了成像光谱技术发展的科学背景与现状。     

快速启动微型J—T制冷器

在一些特殊应用中，要求把红外探测器必须在几秒钟或更短的时间内冷却到工作状态。微型Ｊ－Ｔ式制冷是常用致冷方式。本文介绍了快速启动冷却红外探测器的Ｊ－Ｔ制冷器的设计及达到快速冷却的方法以及测试结果。     

添加尖晶石对氧化锌压敏电阻性能的影响

通过添加尖晶石（Ｚｎ７Ｓｂ２Ｏ（１２））改性研制出电位梯度为１００Ｖ／ｍｍ左右，压敏电压在８２～１５０Ｖ，通流容量可达１６００Ａ／ｃｍ２，漏电流＜２μＡ系列压敏电阻器，从而满足了国内电话交换机行业对８２Ｖ、１００Ｖ、１２０Ｖ、１５０Ｖ压敏电阻器的电性能要求。从工艺的角度解释了尖晶石对氧化锌瓷晶粒的作用原理，并分析了尖晶石的微观结构及粒度对瓷片电性能的影响。     

Erratum: Preparation of size‐controlled In2O3 nanoparticles

The article referenced above was first published online on 7 August 2007 with incorrect pagination; the pagination has now been corrected online and in print. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of optically active poly(N‐propargylsulfamides) with helical conformation

A novel chiral N‐propargylsulfamide monomer ( 1a ) and its enantiomer ( 1b ) were synthesized and polymerized with (nbd)Rh⁺B^?(C₆H₅)₄ as a catalyst providing poly(1) (poly( 1a ) and poly( 1b )) in high yields (≥99%). Poly(1) could take stable helices in less polar solvents (chloroform and THF), demonstrated by strong circular dichroism signals and UV–vis absorption peaks at about 415 nm and the large specific rotations; but in more polar solvents including DMF and DMSO, poly(1) failed to form helix. Quantitative evaluation with anisotropy factor showed that the helical screw sense had a relatively high thermal stability. These results together with the IR spectra measured in solvents showed that hydrogen bonding between the neighboring sulfamide groups is one of the main driving forces for poly(1) to adopt stable helices. In addition, copolymerization of monomer 1a and monomer 2 was conducted, the solubility of poly(1) was improved drastically. However, the copolymerization had adverse effects on the formation of stable helices in the copolymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 500–508, 2007     

二乙胺合三(5-甲基-2-苯并噻唑基)硼烷的晶体结构

标题化合物二乙胺合三（５－甲基－２－苯并噻唑基）硼烷（Ｃ２８Ｈ２９ＢＮ４Ｓ３（Ｍｒ＝５２７．５７）的晶体属于三斜晶系，空间群为Ｐ１，晶胞参数ａ＝０．３９７（８）ｎｍ，ｂ＝１．１７４２（６）ｎｍ，ｃ＝１．３１００（２）ｎｍ，α＝１０４．２９（２）°，β＝９２．９９（３）°，γ＝９８．５８（５）°，Ｖ＝１．３７９０ｎｍ３，Ｚ＝２，Ｄｃ＝１．２７０ｇ／ｃｍ３，μ（ＭｏＫα）＝２．８０４ｃｍ－１．结构的偏离因子Ｒ＝０．０６４８，Ｒｗ＝０．０７３７．结构测定表明，甲基取代基的电子效应导致硼碳键键长的平均化，预示杂环对硼原子的π－电子反馈与胺基氮原子对硼原子的反馈有彼消此长的关系．