多媒体教学课件的网上发布

主要介绍AUTHORWARE下多媒体教学课件的网上发布技术路线与实践     

Protocol design for scalable and reliable group rekeying

We present the design and specification of a protocol for scalable and reliable group rekeying together with performance evaluation results. The protocol is based upon the use of key trees for secure groups and periodic batch rekeying. At the beginning of each rekey interval, the key server sends a rekey message to all users consisting of encrypted new keys (encryptions, in short) carried in a sequence of packets. We present a scheme for identifying keys, encryptions, and users, and a key assignment algorithm that ensures that the encryptions needed by a user are in the same packet. Our protocol provides reliable delivery of new keys to all users eventually. It also attempts to deliver new keys to all users with a high probability by the end of the rekey interval. For each rekey message, the protocol runs in two steps: a multicast step followed by a unicast step. Proactive forward error correction (FEC) multicast is used to reduce delivery latency. Our experiments show that a small FEC block size can be used to reduce encoding time at the server without increasing server bandwidth overhead. Early transition to unicast, after at most two multicast rounds, further reduces the worst-case delivery latency as well as user bandwidth requirement. The key server adaptively adjusts the proactivity factor based upon past feedback information; our experiments show that the number of NACKs after a multicast round can be effectively controlled around a target number. Throughout the protocol design, we strive to minimize processing and bandwidth requirements for both the key server and users.     

信息社会世界峰会及其筹备进程

信息社会世界峰会是根据ITU的相关决议，在ITU的大力倡导下，在联合国和其他国际组织、国际机构的支持和配合下促成的。峰会的目的旨在通过召开尽可能高级别的会议，就信息社会建设问题达成全球共识，通过利用信息通信技术潜力。推动实现联合国《千年宣言》所确定的目标，促进全人类的进步。峰会的整个进程分为两个阶段，第一阶段于2003年12月在日内瓦举行，第二阶段于2005年在突尼斯举行。目前，峰会的主要议题和安排已基本确定，各国，尤其是发达国家和发展中国家在对信息社会的认识和未来的一些做法上还存在明显分歧。     

A NUMERICAL EMBEDDING METHOD FOR SOLVING THE NONLINEAR COMPLEMENTARITY PROBLEM(Ⅱ)-ALGORITHM AND ITS CONVERGENCE

In this paper,based on the results presented in part Ⅰ of this paper[18],we present a numerical embedding algorithm for solving the nonlinear complementarityproblem, and prove its convergence carefully. Numerical experiments show that thealgorithm is successful.     

2005年中国电信运营市场发展现状与展望

2005年是中国电信业的“转型年”．国内电信运营商依赖投资拉动增长速度减缓的趋势得以深化。国内电信运营商的投资更加趋于理性。通过总结2005年田内电信运营市场态势、各运管商发展策略、行业热点及未来展望四个方面阐述国内电信运营市场的发展状况。     

一类非线性发展方程整体弱解的存在性和稳定性

该文考虑一类新的非线性方程(｜ut｜r-2ut)t-Δutt-Δu-ρ(t)Δut=f(u) 的初边值问题，利用小扰动法证明了整体弱解的 存在性，借用位势井的概念得到了解的稳定性.〖HT5”H〗关键词:〖HT5”SS〗非线性发展方程;初边值问题;整体弱解;稳定性.     

Efficient particle filter-based processing algorithm for clutter suppression and IR point targets enhancement

A novel soft decision-based median subtraction filter is presented for clutter suppression and infrared (IR) point targets enhancement. The decision is made based on a jump Markov model and its state and parameter estimation using a particle filter. The scheme is compared with other conventional clutter background removal techniques and good results are obtained.     

CMOS artificial subretinal chip for natural light illumination

A novel CMOS oscillating pixel array for subretinal prosthesis used in natural light illumination is presented. Its prototype chips are fabricated in a standard 0.6 /spl mu/m CMOS technology. Experimental results show the device can deliver effective self-oscillation for subretinal electrical stimulation.     

激光二极管侧面抽运Nd:YAG锁模激光器的研究

利用谐振腔的稳定条件对激光二极管侧面抽运的Nd：YAG锁模直腔的稳区特性和谐振腔内的光斑分布进行了分析。根据对腔参量的分析，选取合适的腔参量设计了一个简单的侧面抽运直腔，该谐振腔腔形简单，没有像散，振荡光模式好，有利于激光器的锁模运转。实验中采用国内自行研制的半导体可饱和吸收镜，实现了激光二极管侧面抽运半导体可饱和吸收镜锁模Nd：YAG激光器的连续锁模运转，平均输出功率为2W，锁模脉冲宽度为10ps，重复频率为100MHz。结合实验结果进一步讨论了半导体可饱和吸收镜的一些参量如饱和恢复时间、调制深度等对实现稳定连续锁模的影响。     

A note on an SOR-like method for augmented systems

Golub et al. (2001, BIT, 41, 71–85) gave a generalizedsuccessive over-relaxation method for the augmented systems.In this paper, the connection between the SOR-like method andthe preconditioned conjugate gradient (PCG) method for the augmentedsystems is investigated. It is shown that the PCG method isat least as accurate (fast) as the SOR-like method. Numericalexamples demonstrate that the PCG method is much faster thanthe SOR-like method.