Synthesis of silk-like FeS2/NiS2 hybrid nanocrystals with improved reversible oxygen catalytic performance in a Zn-air battery

The development of highly active and stable reversible oxygen electrocatalysts is crucial for improving the efficiency of metal-air battery devices. Herein, an efficient liquid exfoliation strategy was designed for producing silk-like FeS₂/NiS₂ hybrid nanocrystals with enhanced reversible oxygen catalytic performance that displayed excellent properties for Zn-air batteries. Because of the unique silk-like morphology and interface nanocrystal structure, they can catalyze the oxygen evolution reaction (OER) efficiently with a low overpotential of 233 mV at j = 10 mA cm^?2. This is an improvement from the recently reported catalysts in 1.0 M KOH. Meanwhile, the oxygen reduction reaction (ORR) activity of the silk-like FeS₂/NiS₂ hybrid nanocrystals showed an onset potential of 911 mV and a half-wave potential of 640 mV. In addition, the reversible oxygen electrode activity of the silk-like FeS₂/NiS₂ hybrid nanocrystals was calculated to be 0.823 V, based on the potential of the OER and ORR. Further, the homemade rechargeable Zn-air batteries using FeS₂/NiS₂ hybrid nanocrystals as the air-cathode displayed a high open-circuit voltage of 1.25 V for more than 17 h and an excellent rechargeable performance for 25 h. The solid Zn-air batteries exhibited an excellent rechargeable performance for 15 h. This study provided a new method for designing interface nanocrystals with a unique morphology for efficient multifunctional electrocatalysts in electrochemical reactions and renewable energy devices.     

Amine- and phosphine-free palladium(II)-catalyzed homocoupling reaction of terminal alkynes

An efficient, amine- and phosphine-free palladium(II)-catalyzed homocoupling of terminal alkynes has been developed. In the presence of PdCl₂, CuI, Me₃NO, and NaOAc, homocoupling of various terminal alkynes underwent smoothly to afford the corresponding diynes in moderate to high yields without any phosphine ligands. In contrast, the presence of a phosphine ligand (PPh₃) disfavored this palladium-catalyzed homocoupling procedure. Bases, solvents, and CuI have fundamental influence on the palladium-catalyzed homocoupling of terminal alkynes.     

Investigation of Tomato Plant Defence Response to Tobacco Mosaic Virus by Determination of Methyl Salicylate with SPME-Capillary GC-MS

Headspace SPME was applied to investigation of tomato plant defence response to tobacco mosaic virus (TMV) by determination of compounds emitted from tomato plants at the extraction conditions of 25 °C and 15 min. It was found that TMV-inoculated tomato plant released large amount of methyl salicylate (MeSA) as response to TMV and MeSA concentration changed dramatically with time after inoculation. Gaseous MeSA as a signaling compound could induce in surrounding tomato plants to produce salicylic acid (SA) and synthesize and release MeSA. These results show that MeSA might be an airborne plant-signalling molecule in tomato plant response to TMV. The present method provided low detection limit of 2.0 ng L^–1 and needed little sample preparation time (15 min), so the method makes it easy to find the critical times of tomato plant response to TMV by fast determination of MeSA released from tomato plant.     

Method development for the quantitation of ABT-578 in rabbit artery tissue by 96-well liquid-liquid extraction and liquid chromatography/tandem mass spectrometric detection

Quantitative determination of drug concentrations in tissue samples can provide critical information for drug metabolism, kinetics, and toxicity evaluations. For analysis of tissue samples using liquid chromatography/tandem mass spectrometric (LC/MS/MS) detection, homogenization is a critical step in achieving good assay performance. Assay performance can be closely evaluated by spiking the drug directly into tissue samples prior to homogenization. It is especially important to include this assay evaluation for the analysis of artery tissue samples because artery tissue is very elastic, making it quite a challenge to develop an effective procedure for homogenization. An LC/MS/MS assay in 96-well format using liquid-liquid extraction was developed for analyzing ABT-578 in rabbit artery samples. Tissue quality control samples were prepared by spiking ABT-578 stock solutions directly into the tissue before homogenization. The usage of the tissue control samples gives a thorough evaluation of the sample preparation process that includes both homogenization and sample extraction. A 20% blood in saline solution was used as a homogenization solution. Calibration standards were made by spiking ABT-578 into rabbit whole blood. Blood quality control samples were also prepared by spiking ABT-578 into rabbit whole blood. These blood QC samples were used to confirm the validity of the calibration curve. A lower limit of quantitation of 0.050 ng/mL was achieved. The linear dynamic range of blood standards was from 0.050-30.3 ng/mL with the correlation coefficient (r) ranging from 0.9969-0.9996. Overall %CV was between 1.3 and 7.0%, and analytical recovery was between 98.2 and 105.8% for blood QC samples. The %CVs for tissue QC samples were between 6.7 and 13.0%, and analytical recovery after correction was between 93.5 and 114.3%.     

两亲性丙烯酸酯共聚物的聚合研究

利用过氧化苯甲酰为引发剂探讨了甲基丙烯酸β－羟乙酯和丙烯酸长链烷基酯的自由基共聚合。重点讨论了合成条件如溶剂、沉淀剂、引发剂用量、单体配比、反应时间等对共聚反应的影响以及各种聚合条件对该共聚物的组成、结构和性能的影响。并用ＩＲ，ＧＰＣ，＾１３ＣＮＭＲ等手段对共聚物进行了表征。     

The determination of calcium in yttrium oxide by alpha-particle activation analysis

The determination of calcium in yttrium oxide through the⁴⁰Ca(α, p)⁴³Sc reaction was studied, using a post-irradiation radiochemical separation procedure. The half-life of⁴³Sc was determined to be 3.87 hr. The chemical recovery was about 70%. The detection limit was about 10 ppb, for a 30 min irradiation at an alpha-particle beam current of 1 μA (E_α=13.4 MeV) and γ−γ coincidence counting (background counts being<1, cpm), with counting starting at 4 hours after the end of irradiation. Four samples of a batch of yttrium oxide (A.R.) were analyzed, and found to contain 13.9±1.0 ppm of calcium.     

链段相容性对聚酯-聚醚多嵌段共聚物组成均一性的影响

<正> 由结晶型芳族聚酯为硬链段,无定型脂肪族聚醚为软链段的聚酯-聚醚多嵌段共聚物,是一类性能优良的热塑弹性体,本文研究链段相容性对这类聚合物组成均一性的影响,因此,合成了一系列不同链段结构的聚酯-聚醚多嵌段共聚物。 如硬链为聚对苯二甲酸乙二醇酯(PET)和丁二醇酯(PBT);软链段有聚乙二醇醚(PET)、聚丁二醇醚(PTMG)、聚二醇醚(PPG)和四氢呋喃同环氧丙烷的共聚醚二醇     

Lewis acid-mediated selective chlorinations of silyl enolate

A new method involving efficient, widely applicable, and highly selective alpha-chlorination of simple silyl enolate with Lewis acid and an alpha,alpha-dichloro-1,3-dicarbonyl controller unit was reported. Diastereoselectivity and enantioselectivity of the reaction were investigated. High reactivity and selectivity were achieved by using alpha,alpha-dichlorinated malonic ester.     

The interfacial dilational properties of hydrophobically modified associating polyacrylamide studied by the interfacial tension relaxation method at an oil-water interface

The interfacial dilational viscoelastic properties of hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2-phenoxylethyl acrylate (POEA) (<1.0 mol%) at the octane-water interfaces were studied by means of the interfacial tension relaxation method. The dependencies of interfacial dilational elasticity and viscous component on the dilational frequency were investigated. The interaction of hydrophobically associating block copolymer [P(AM/POEA)] with sodium dodecyl sulfate (SDS) has been explored. The results show that at lower frequency, the dilational elasticity for different concentration copolymer is close to zero; at higher frequency, the dilational elasticity shows no change with increased frequency; At moderate frequency (10(-3)-1 Hz), the dilational elasticity decreased with a decrease in the dilational frequency. The results show that the hydrophobic groups of [P(AM/POEA)] chains can be associated by inter- or intrachain liaisons in water solution. The dilational viscous component for P(AM/POEA) comes forth a different maximum value at different frequencies when the polymer concentration is different. It is generally believed that the dilational viscous component reflects the summation of the various microscopic relaxation processes at and near the interface and different relaxation processes have different characteristic frequencies. The spectrum of dilational viscous component may appear more than once maximum values at different frequencies. The influence of SDS on the limiting dilational elasticity and viscous component for polymer solution was elucidated. For 5000 ppm polymer solution, the limiting dilational elasticity decreased with an increase in SDS concentration. The dilational viscous component passed through a maximum value with a rise in the dilational frequency, which appeared at different frequency when SDS concentration is different; and the higher is the concentration, the lower is the dilational frequency. It can be explained that macromolecules may be substituted by SDS molecules in the interface and the interaction of molecules decrease, which makes the limiting dilational elasticity decrease. For 200 ppm polymer solution, the limiting dilational elasticity increased firstly and then decreased with SDS concentration increasing. This may be explained that the interfacial polymer concentration is so low that SDS molecules absorbed in the interface dominate dilational properties of the interfacial film even at very low SDS concentration. However, SDS molecules can gradually substitute the polymer molecules in the interface with a rise in SDS concentration, which results in the decrease in the limiting dilational elasticity.     

DNA-mediated coordinative assembly of upconversion hetero-nanostructures for targeted dual-modality imaging of cancer cells

We reported a simple and universal strategy for DNA-mediated assembly of CdTe quantum dots (QDs) and lanthanide-doped upconversion nanoparticles (UCNPs). Such DNA-QD/UCNPs heterostructures not only maintains both fluorescent properties of QDs and upconversion luminescence behaviors of UCNPs, but also offers a polyvalent DNA surface, allowing for targeted dual-modality imaging of cancer cells using an aptamer