Titanium carbonitride films on cemented carbide cutting tool prepared by pulsed high energy density plasma

Hard films prepared by pulsed high energy density plasma (PHEDP) are characterized by high film/substrate adhesive strength, and high wear resistance. Titanium carbonitride (TiCN) films were deposited onto YG11C (ISO G20) cemented carbide cutting tool substrates by PHEDP at room temperature. XRD, XPS, SEM, AES, etc. were adopted to analyze the phases (elements) composition, microstructure and the interface of the films, respectively. The results show that, the uniform dense films are composed of grains ranging from 70 to 90 nm. According to the AES result, there is a broad transition layer between the film and the substrate, due to the ion implantation effect of the PHEDP. The transition layer is favorable for the film/substrate adhesion.     

ASON网络业务及要求

电信网发展正在由技术驱动向业务驱动演进。ASON第一次将控制层面引入了传送网，利用控制层面和分布在各传送设备的智能单元可以更方便地提供业务。本介绍了ASON的业务类型、业务等级、接入方法等属性，并重点介绍了几种业务模型实例及应用，对ASON管理平面对业务的管理进行了讨论，最后对业务的应用和ASON网络发展影响进行了探讨。     

DDS技术在数字激光相位测距仪中的应用

本文介绍了直接数字合成(DDS)技术在激光相位测距仪中的应用。使用该技术研制的数字激光相位测距仪具有操作简便、携带方便、性能可靠的特点，测相精度优于干分之一。     

低强度激光血管内照射对海洛因戒断综合征的疗效观察

对于毒瘾戒断综合症的治疗一般采用强行戒断或逐步撤药等方法 ,但患者非常痛苦 ,且复吸率较高。为了观察低强度He -Ne激光对戒断症状的抑制作用 ,本文用低强度激光血管内照射疗法对 3 0例吸毒戒断综合征患者进行了治疗 ,并与对照组比较。结果证明 :实验组疗效明显优于对照组 (P <0 .0 1) ,为进一步的临床应用提供了临床依据。     

超Jaynes-Cummings模型中的原子置于热辐射场时的相干特性

超Jaynes一Cummings模型中的两能级原子置于热辐射场。通过求解原子与热辐射场相互作用过程中原子约化密度算符非对角元．精确得出子原子相干性的衰变规律。研究了在相互作用系统中外加驱动场时可保持原子的相干性，此时外加驱动场的时间演化与原子的跃迁频率、原子偶极矩、热库的温度和k模光子频率等因素有关。     

Call Admission Policies Based on Calculated Power Control Setpoints in SIR-Based Power-Controlled DS-CDMA Cellular Networks

In this paper, we develop call admission control algorithms for SIR-based power-controlled DS-CDMA cellular networks. We consider networks that handle both voice and data services. When a new call (or a handoff call) arrives at a base station requesting for admission, our algorithms will calculate the desired power control setpoints for the new call and all existing calls. We will provide necessary and sufficient conditions under which the power control algorithm will have a feasible solution. These conditions are obtained through deriving the inverse of the matrix used in the calculation of power control setpoints. If there is no feasible solution to power control or if the desired power levels to be received at the base station for some calls are larger than the maximum allowable power limits, the admission request will be rejected. Otherwise, the admission request will be granted. When higher priority is desired for handoff calls, we will allow different thresholds (i.e., different maximum allowable power limits) for new calls and handoff calls. We will develop an adaptive algorithm that adjusts these thresholds in real-time as environment changes. The performance of our algorithms will be shown through computer simulation and compared with existing algorithms.     

应用多抽样率信号处理实现SSB调制信号

在探讨了软件无线电的基本概念,基于软件无线电定义的发射平台结构及多抽样率数字信号处理的基本内容的基础上,着重探讨了软件无线电发射平台中多抽样率数字信号处理的应用,并以单边带调制信号(SSB)为例,指出与传统SSB产生方法不同的结构。     

High voltage (>1kV) and high current gain (32) 4H-SiC power BJTs using Al-free ohmic contact to the base

This letter reports the design and fabrication of 4H-SiC bipolar junction transistors with both high voltage (>1kV) and high dc current gain (/spl beta/=32) at a collector current level of I/sub c/=3.83A (J/sub c/=319 A/cm/sup 2/). An Al-free base ohmic contact has been used which, when compared with BJTs fabricated with Al-based base contact, shows clearly improved blocking voltage. A specific on-resistance of 17 m/spl Omega//spl middot/cm/sup 2/ has been achieved for collector current densities up to 289 A/cm/sup 2/.     

一种降低OFDM信号PAPR的新方法

正交频分复用(OFDM)技术的一个缺点是信号的高峰值平均功率比(PAPR)大大降低了系统中线性功放的效率。本文提出一种新的基于Nyquist脉冲成形的PAPR抑制方法。这种方法基于选择适当的Nyquist脉冲波形集合对OFDM的各个子载波进行脉冲成形。分析论证了该方法的PAPR上限值和所用的脉冲成形波形集合。仿真结果表明该方法能有效降低任意子载波数目的OFDM信号的PAPR值,而且与已有方法相比应用更为简单。因此脉冲成形技术不仅能对传输信号进行频谱成形来提高系统的频带利用率,而且还可以减小信号的PAPR值。     

具有复合埋层的新型SIMON材料的制备

采用氮氧共注入方法制备了新型的 SIMON(separation by implanted oxygen and nitrogen) SOI材料 .采用不同的制备方法分别制作出样品并进行了结构测试和分析 ,发现 SIMON材料的结构和质量对注入条件和退火工艺非常敏感 .并对各种氮氧复合注入技术做了分析和比较 ,发现氮氧分次注入可以得到更好的结构和性能