基于云模型的客户关系管理系统的设计与实现

采用云模型根据客户行为对自动客户进行分类,将关于动态概念描述的思想引入到对分类状态集的后处理过程中,以隶属度高的类别被选中的概率大的程序设计原则实现了分类器处理过程的动态性。基于云模型,设计一个客户关系管理系统,从而实现客户资料的记录、查询和分类等功能。     

MAFIA软件模拟三维耦合腔慢波结构

本文详细描述了耦合腔慢波结构色散，耦合阻抗数值模拟的原理及方法，模拟过程是由ＭＡＦＩＡ软件包的频域解程序完成的，其结果与实测值，Ａｒｇｕｓ软件模拟值相比较，色散误差小于１％，最后，讨论了两种拟合色散曲线的方法，证实了Ｃｕｒｎｏｗ方程拟合最佳。     

Multifunctional Electrode Design Consisting of 3D Porous Separator Modulated with Patterned Anode for High‐Performance Dual‐Ion Batteries

Searching for low‐cost and high‐capacity electrode materials such as metal anodes is of important significance for the development of new generation rechargeable batteries. However, metal anodes always suffer from severe volume expansion/contraction during a repeated electrochemical alloying/dealloying process. In this study, a novel concept about modifying metal‐anodes‐based battery construction with a multifunctional electrode (ME) design is provided. The ME consists of a 3D porous separator that is modulated with a patterned aluminum anode, which simultaneously works as a current collector, anode material, and separator in a dual‐ion battery (DIB). The 3D porous separator not only enables the ME to possess significantly improved electrolyte uptake and retention capabilities, but also acts as a protecting layer to restrict the surface pulverization of the Al anode. The ME‐DIB displays remarkably enhanced cell performances, including excellent cycling stability with 92.4% capacity retention after 1000 cycles at a current density of 2 C, and superior rate performance with 80.7% capacity retention at 10 C.     

Manipulable and Hybridized,Ultralow‐Threshold Lasing in a Plasmonic Laser Using Elliptical InGaN/GaN Nanorods

Manipulating stimulated‐emission light in nanophotonic devices on scales smaller than their emission wavelengths to meet the requirements for optoelectronic integrations is a challenging but important step. Surface plasmon polaritons (SPPs) are one of the most promising candidates for sub‐wavelength optical confinement. In this study, based on the principle of surface plasmon amplification by the stimulated emission of radiation (SPASER), III‐Nitride‐based plasmonic nanolaser with hybrid metal–oxide–semiconductor (MOS) structures is designed. Using geometrically elliptical nanostructures fabricated by nanoimprint lithography, elliptical nanolasers able to demonstrate single‐mode and multimode lasing with an optical pumping power density as low as 0.3 kW cm^?2 at room temperature and a quality Q factor of up to 123 at a wavelength of ≈490 nm are achieved. The ultralow lasing threshold is attributed to the SPP‐coupling‐induced strong electric‐field‐confinement in the elliptical MOS structures. In accordance with the theoretical and experimental results, the size and shape of the nanorod are the keys for manipulating hybridization of the plasmonic and photonic lasing modes in the SPASER. This finding provides innovative insight that will contribute to realizing a new generation of optoelectronic and information devices.     

钕磷酸盐激光玻璃中金属铂颗粒的产生与迁移

给出了钕磷酸盐激光玻璃中可能存在的铂磷酸盐、偏磷酸盐化合物的热力学参数.利用这些参数,研究了激光玻璃熔制过程中可能发生的液-固、气-固、气-液等化学反应的方向和限度,分析了玻璃中金属铂颗粒的可能来源、存在方式及迁移过程.结合实验讨论了铂的产生及迁移、最佳除铂工艺途径和钕磷酸盐激光玻璃的除铂机理.     

AlGaN中的应变状态

用X射线衍射和卢瑟福背散射方法研究了生长在GaN上厚度为570nm的AlxGa1-xN外延层中的应变状态.实验结果显示AlGaN的共格因子在组分小于0.42时随组分的增加而近似线性减小,并且在0.42时达到30%,此后随组分的增加变化较慢,在x=1(AlN)时接近0.在本实验条件中,由于GaN层处于压应变状态,导致与AlGaN外延层的失配变小,使得组分约为0.16的AlxGa1-xN外延层可以共格生长在GaN层上.     

全固态窄线宽钠导星激光器

研制了一台重复频率400 Hz,平均功率1.0 W的激光二极管抽运全固态窄线宽钠导星激光器.利用两路波长分别为1064 nm和1319 nm的声光(AO)调Q激光器作为基频光,在腔外通过三硼酸锂(LBO)晶体和频产生(SFG)589 nm钠导旱激光,和频效率约达20%.每路基频光均采用标准具压窄线宽,输出和频光线宽约1.8 GHz,并调节控制标准具的温度和倾斜角度将中心波长锁定于589.159 nm(偏差±1 pm),实现了激光器谱线与钠原子D2线的精确匹配.     

集成光学用单模磁光波导薄膜

采用双层（ＢｉＡｌ）ＹＩＧ膜结构来制作单模磁光波导。通过改变外延生长工艺来调节两层薄膜的折射率，可在一定波导的厚度范围内实现单模传输。Ｘ射线衍射测量表明薄膜质量良好，且易磁化方向平行膜面，最后利用棱镜耦合，观察了波导中的暗ｍ线。     

Ni元素对激光诱导自蔓延反应合成Ti-Fe共晶合金组织性能的影响

采用激光诱导自蔓延反应合成制备了Ti-Fe-Ni三元合金。实验结果表明,当第三组元Ni含量介于12 at.%之内时,合成产物仍保持Ti70.5Fe29.5共晶合金的相组成,即是由β-Ti固溶体、TiFe和Ti2Fe金属间化合物所组成。但随着Ni含量的增加,合成产物中β-Ti固溶体的数量逐渐减少,而TiFe和Ti2Fe金属间化合物的数量逐渐增加。同时组织形态也由共晶组织逐渐转变为过共晶组织。随着Ni含量的增加,合成样品的致密度逐渐降低;由于受合成样品微观组织和致密性这两种因素的综合作用,致使Ni含量为9 at.%的合成样品具有高的硬度、强度及良好的塑性。     

基于狄拉克半金属宽带的可调谐太赫兹偏振器

提出了一种基于狄拉克半金属超材料的双开口环结构的宽带偏振器,研究了狄拉克半金属费米能级以及中间介质厚度对偏振转换性能的影响。结果表明:当中间介质厚度为22μm,费米能级为70meV时,在1.44THz和1.95THz两个谐振频率处,偏振转换效率为100%;当中间介质厚度为22μm时,随着狄拉克半金属费米能级从64meV增加到70meV,高低两个谐振峰均产生蓝移;当狄拉克半金属费米能级为70meV时,随着基底介质厚度从19μm增加到22μm,低频处的谐振峰未移动,高频率点处的谐振峰红移。