Synthesis,chiroptical properties of a helical polyacetylene derivative carrying urea moieties

A novel phenylacetylene derivative containing urea groups was synthesized and polymerized with a Rh catalyst to give the corresponding polymer, poly（1） with moderate number-average molecular weights. The poly（1） was soluble in toluene, CHCI3, CH2C12, THF, DMF, and DMSO, but insoluble in hexane, diethyl ether and MeOH. The specific rotation and circular dichroism （CD） spectroscopic studies revealed that poly（1） took predominantly one-handed helical structures. The presence of intramolecular hydrogen bonding was confirmed by liquid-state IR spectroscopy. The helicity of poly（1） could be tuned by temperature and anion. The helical conformation of the polymer was stable against Br but susceptible to F.     

Plasma-Induced Synthesis of CuO Nanofibers and ZnO Nanoflowers in Water

Fiber-shaped cupric oxide (CuO) nanoparticles and flower-shaped ZnO nanoparticles were facilely synthesized by plasma-induced technique directly from copper and zinc electrode pair in water, respectively. The phase composition, morphologies and optical property of nanoparticles have been investigated by energy dispersive X-ray analysis, X-ray powder diffraction, transmission electron microscopy and UV–vis. The in situ analysis by an optical emission spectroscopy clarified the formation mechanism. Plasma was generated from the discharge between a metal electrode pair in water by a pulse direct current power. CuO and ZnO nanoparticles were synthesized via almost the same formation mechanism, which were prepared via the rapid energetic radicals’ bombardment to electrodes’ surface, atom vapour diffusion, plasma expansion, solution medium condensation, and in situ oxygen reaction and further growth. This novel plasma-induced technique will become a potential application in nanomaterials synthesis.     

Purification and Characterization of the Glucoside 3-Dehydrogenase Produced by a Newly Isolated Sphingobacterium faecium ZJF-D6 CCTCC M 2013251

A soluble glucoside 3-dehydrogenase (G3DH) was purified from a newly isolated Sphingobacterium faecium ZJF-D6 CCTCC M 2013251. The enzyme was purified to 35.71-fold with a yield of 41.91 % and was estimated by sodium dodecyl sulphate–polyacrylamide gel electrophoresis with a molecular mass of 62 kDa. The sequences of two peptides of the enzyme were all contained in a GMC family oxidoreductase (EFK55866) by mass spectrometry analysis. The optimal pH of the enzyme was around 6.2. The enzyme was stable within a pH range of 5.0–6.6 and was sensitive to heat. G3DH from S. faecium exhibited extremely broad substrate specificity and well regioselectivity to validoxylamine A. The enzyme was completely inhibited by Hg₂Cl₂ and partly inhibited by Cu²⁺, Fe²⁺, Ca²⁺, and Cd²⁺. The apparent K _m values for D-glucose, sucrose, and validoxylamine were calculated to be 1.1, 1.7, and 2.1 mM, respectively. With this purified enzyme, 3-keto sucrose was prepared at pH 5.0, 30 °C for 10 h with a yield of 28.7 %.     

Aggregation behavior of pH- and thermo-responsive block copolymer protected gold nanoparticles

Two distinctive block copolymers protected gold nanoparticles (AuNPs) were prepared with poly(methylacrylic acid)-block-poly(N-isopropylacrylamide) (SH-PMAA₆₄-b-PNIPAM₃₅) and poly (N-isopropylacrylamide)-block-poly(methylacrylic acid) (SH-PNIPAM₄₀-b- PMAA₆₀) through strong gold-sulfur bonding. The hybrid NPs have a pH-responsive inner shell (or corona) and a thermo-responsive corona (or inner shell) due to different location relations of the PNIPAM and PMAA on the surface of AuNPs. Then, the aggregation behaviors, as well as the changes of optical properties, of two hybrid NPs were compared in response to both stimuli. The results showed the obvious inter-particle aggregation caused by the phase transition for hydrophobic coronal polymer. However, the particles of hydrophilic corona layer retained good dispersion and the pH-responsive or thermo-responsive characteristics of shell layer made relatively minor changes.     

Facile fabrication of polymer-inorganic hybrid particles with various morphologies by combination of hydrolytic condensation process with radiation seeded emulsion polymerization

A novel approach was proposed to the synthesis of poly(styrene-divinyl benzene-acrylic acid)/poly [3-(methacryloxy)propyl trimethoxysilane-styrene] [P(St-DVB-AA)/P(MPS-St)] hybrid particles. The morphologies of the particles could be tuned from raspberry-like to snowman-like by simply changing the feeding amount of second monomer or inorganic precursor. The fabricated raspberry-like ones could be modified to obtain hydrophobic surface with a contact angle up to 146°. And the snowman-like ones could be used as solid surfactant to stabilize water/styrene (W/St) mixtures, thus hierarchical porous materials could be obtained after the polymerization of monomer phase. The preliminary application of such soap-free block materials in oil-polluted water treatment was also investigated.

Landfill leachate treatment using the sequencing batch biofilm reactor method integrated with the electro-Fenton process

A study was conducted on the treatment of landfill leachate by combining the sequencing batch biofilm reactor (SBBR) method with the electro-Fenton method. The reduction of chemical oxygen demand (COD), biological oxygen demand (BOD₅), and ammonia nitrogen (NH ₄ ⁺ -N) from the leachate by the SBBR method was investigated. For the electro-Fenton experiment, the changes in COD and total organic carbon (TOC) with the increase in H₂O₂ dosage and electrolysis time under optimal conditions were also analysed. The results showed that the average efficiencies of reduction of COD, BOD₅, and NH ₄ ⁺ -N achieved using the SBBR method were 21.6 %, 54.7 %, and 56.1 %, respectively. The bio-effluent was degraded by the subsequent electro-Fenton process, which was rapid over the first 30 min then subsequently slowed. After 60 min of the electro-Fenton treatment, the efficiencies of reduction of TOC, COD, and BOD₅ were 40.5 %, 71.6 %, and 61.0 %, respectively. There is a good correlation between the absorbance of leachate at 254 nm (UV₂₅₄) and COD or TOC during the electro-Fenton treatment.     

Preparation and characteristics of spinnable sol and continuous mullite fibers with nano silica addition

The spinning precursor sols for the continuous mullite-based fibers were prepared by adding nano-silica to substitute part of silica sol. The effect of SiO₂ nanoparticles on the particle evolution models, polymerization degree and solid content of the sol,and the spinning length and sintering behavior of the fibers was investigated. The results were shown that the addition of nano silica enhanced the polymerization degree and extended the spinnable range of the sol. The appropriate polymerization degree (B value) for this sol system was 1.885–2.145. The grain diameter decreased from 39.6 to 25.9 nm with increasing the nano-silica content to 20 %, and then, it increased to 41.2 nm with increasing the nano-silica content to 100 %. The appropriate content of nano-silica powders would reduce the grain diameter. However, it had no influence on the linear growth model, homogeneity and solid content of the precursor sol.     

Performance enhancement of multicrystalline silicon solar cells and modules using double‐layered SiNx:H antireflection coatings

Silicon nitride coating deposited by the plasma‐enhanced chemical vapor deposition method is the most widely used antireflection coating for crystalline silicon solar cells. In this work, we employed double‐layered silicon nitride coating consisting of a top layer with a lower refractive index and a bottom layer (contacting the silicon wafer) with a higher refractive index for multicrystalline silicon solar cells. An optimization procedure was presented for maximizing the photovoltaic performance of the encapsulated solar cells or modules. The dependence of their photovoltaic properties on the thickness of silicon nitride coatings was carefully analyzed. Desirable thicknesses of the individual silicon nitride layers for the double‐layered coatings were calculated. In order to get statistical conclusions, we fabricated a large number of multicrystalline silicon solar cells using the standard production line for both the double‐layered and single‐layered antireflection coating types. On the cell level, the double‐layered silicon nitride antireflection coating resulted in an increase of 0.21%, absolute for the average conversion efficiency, and 1.8 mV and 0.11 mA/cm² for the average open‐circuit voltage and short‐circuit current density, respectively. On the module level, the cell to module power transfer factor was analyzed, and it was demonstrated that the double‐layered silicon nitride antireflection coating provided a consistent enhancement in the photovoltaic performance for multicrystalline silicon solar cell modules than the single‐layered silicon nitride coating. Copyright © 2015 John Wiley & Sons, Ltd.     

A Biomimetic Nanoparticle to “Lure and Kill” Phospholipase A2

Inhibition of phospholipase A2 (PLA2) has long been considered for treating various diseases associated with an elevated PLA2 activity. However, safe and effective PLA2 inhibitors remain unavailable. Herein, we report a biomimetic nanoparticle design that enables a “lure and kill” mechanism designed for PLA2 inhibition (denoted “L&K-NP”). The L&K-NPs are made of polymeric cores wrapped with modified red blood cell membrane with two inserted key components: melittin and oleyloxyethyl phosphorylcholine (OOPC). Melittin acts as a PLA2 attractant that works together with the membrane lipids to “lure” in-coming PLA2 for attack. Meanwhile, OOPC acts as inhibitor that “kills” PLA2 upon enzymatic attack. Both compounds are integrated into the L&K-NP structure, which voids toxicity associated with free molecules. In the study, L&K-NPs effectively inhibit PLA2-induced hemolysis. In mice administered with a lethal dose of venomous PLA2, L&K-NPs also inhibit hemolysis and confer a significant survival benefit. Furthermore, L&K-NPs show no obvious toxicity in mice. and the design provides a platform technology for a safe and effective anti-PLA2 approach.     

Light-Induced Chiral Iron Copper Selenide Nanoparticles Prevent β-Amyloidopathy In Vivo

The accumulation and deposition of β-amyloid (Aβ) plaques in the brain is considered a potential pathogenic mechanism underlying Alzheimer's disease (AD). Chiral l/d -Fe_xCu_ySe nanoparticles (NPs) were fabricated that interfer with the self-assembly of Aβ42 monomers and trigger the Aβ42 fibrils in dense structures to become looser monomers under 808 nm near-infrared (NIR) illumination. d -Fe_xCu_ySe NPs have a much higher affinity for Aβ42 fibrils than l -Fe_xCu_ySe NPs and chiral Cu_2−xSe NPs. The chiral Fe_xCu_ySe NPs also generate more reactive oxygen species (ROS) than chiral Cu_2−xSe NPs under NIR-light irradiation. In living MN9D cells, d -NPs attenuate the adhesion of Aβ42 to membranes and neuron loss after NIR treatment within 10 min without the photothermal effect. In-vivo experiments showed that d -Fe_xCu_ySe NPs provide an efficient protection against neuronal damage induced by the deposition of Aβ42 and alleviate symptoms in a mouse model of AD, leading to the recovery of cognitive competence.