Rylene diimide and dithienocyanovinylene copolymers for polymer solar cells

Two polymers containing(E)-2,3-bis(thiophen-2-yl)acrylonitrile(CNTVT) as a donor unit, perylene diimide(PDI) or naphthalene diimide(NDI) as an acceptor unit, are synthesized by the Stille coupling copolymerization, and used as the electron acceptors in the solution-processed organic solar cells(OSCs). Both polymers exhibit broad absorption in the region of 300–850 nm. The LUMO energy levels of the resulted polymers are ca. –3.93 eV and the HOMO energy levels are –5.97 and –5.83 eV. In the binary blend OSCs with PTB7-Th as a donor, PDI polymer yields the power conversion efficiency(PCE) of up to 1.74%, while NDI polymer yields PCE of up to 3.80%.     

A Practical System for High-Throughput Screening of Mutants of <Emphasis Type="Italic">Bacillus fastidiosus</Emphasis> Uricase

For high-throughput screening (HTS) of Bacillus fastidiosus uricase mutants, a practical system was proposed. By error-prone PCR with final 1.5 mM MnCl₂, two focused libraries of mutants for A1-V158 and V150-D212 were generated separately. After induced expression of individual clones in 48-well microplates, Escherichia coli cells (BL21) were lyzed by 1.0 M Tris-HCl at pH 9.0 in 96-well microplates at 25 °C for 7.5 ~ 10.5 h; uricase reaction was continuously monitored with 0.15 mM uric acid in 96-well plates by absorbance at 298 nm to estimate V _m/K _m by kinetic analysis of reaction curve for comparison. V _m/K _m was resistant to initial uric acid levels with an upper limit 3-fold over that of initial rates. By receiver-operator-characteristic analysis of the recognition of the one of higher activity in uricase pair whose specific activity ratio was 1.8 or 3.3, the area-under-the-curve was comparable to that with cell lysates prepared by sonication treatment. A cutoff for the maximum Youden index was thus developed to recognize positive mutants of 1-fold higher activity. Indeed, mutant L171I/Y182F/Y187F/A193S of higher activity but lower thermostability at pH 7.4 and mutant V144A of higher activity and consistent thermostability were discovered. Therefore, the proposed system was practical for HTS of uricase mutants.     

Effect of cooling rate on methane hydrate formation in media

In order to study gas hydrate in media, formation of methane hydrate in three different media including loess, fine and coarse sands were studied. Five cooling rates were applied to form the methane hydrate. The nucleation time of the formation of methane hydrate with each cooling rate were measured for comparison. The experimental results show that the cooling rate is a significant factor affecting nucleation of methane hydrate and gas conversion. Under the same initial conditions, the faster the cooling rate, the shorter the nucleation time and the lower the methane gas conversion rate. The media also affect the formation process of methane hydrate within it. In loess, the gas conversion rate is lowest; in coarse sand, the gas conversion rate is the greatest; and in fine sand, it is in between. According to the study, it is found that the smaller the particle size of the media, the harder the methane hydrate forms within it.     

Electrocatalytic oxidation of phytohormone salicylic acid at copper nanoparticles-modified gold electrode and its detection in oilseed rape infected with fungal pathogen Sclerotinia sclerotiorum

Salicylic acid (SA) is a biological substance that acts as a phytohormone and plays an important role in signal transduction in plants. It is important to accurately and sensitively detect SA levels. A gold electrode modified with copper nanoparticles was used to assay the electrocatalytic oxidation of salicylic acid. It was found that the electrochemical behavior of salicylic acid was greatly improved at copper nanoparticles, indicating that anodic oxidation could be catalyzed at copper nanoparticles. And the pH had remarkable effect on the electrochemical process, a very well-defined oxidation peak appeared at pH 13.3 (0.2 M NaOH). The kinetics parameters of this process were calculated and the heterogeneous electron transfer rate constant (k) was determined to be 1.34 × 10⁻³ cm s⁻¹, and (1 − α)n_α was 1.22. The gold electrode modified with copper nanoparticles could detect SA at a higher sensitivity than common electrodes. The electrode was used to detect the SA levels in oilseed rape infected with the fungal pathogen Sclerotinia sclerotiorum. The results showed that the SA concentration reached a maximum during the 10th-25th hours after infection. This result was very similar to that determined by HPLC, indicating that the gold electrodes modified with copper nanoparticles could be used as salicylic acid sensors.     

Application of ionic liquid modified carbon ceramic electrode for the sensitive voltammetric detection of rutin

An ionic liquid (IL) modified carbon ceramic electrode (CCE) was designed and further used for the voltammetric detection of rutin in this paper. IL-CCE was prepared by mixing graphite powder with 1-butyl-3-methylimidazolium tetrafluoroborate (EMIMBF₄) doped silicate sol-gel matrix together and further characterized by different methods. Then electrochemical behaviors of rutin on the IL-CCE were investigated by different electrochemical methods such as cyclic voltammetry and differential pulse voltammetry (DPV). Due to the presence of IL in the CCE, an enhanced electrochemical response of rutin appeared with a pair of well-defined redox peaks in pH 2.5 phosphate buffer solution (PBS). The electrochemical behaviors of rutin on the IL-CCE were carefully investigated. Under the selected conditions the oxidation peak currents exhibited good linear relationship with the rutin concentration in the range from 0.3 to 100.0 μmol/L with the detection limit as 0.09 μmol/L (3σ). The proposed method was further applied to the rutin tablets sample detection with satisfactory results.     

Three New Illudalane Sequiterpenoids from Pteris semipinnata

The chemical investigation of the aerial parts of Pteris semipinnata resulted in the isolation of three illudalane sesquiterpenoids, namely (2R)‐norpterosin B ( 1 ), (2R)‐12‐O‐β‐D ‐glucopyranosylnorpterosin B ( 2 ), and semipterosin A ( 3 ), along with three known compounds. The structures of 1 – 3 were established by spectroscopic methods, including extensive 2D‐NMR and CD analyses.     

Mediated Electron Transfer Across Supported Bilayer Lipid Membrane with TCNQ‐Based Organometallic Compounds

Supported bilayer lipid membrane (s‐BLM) containing one‐dimensional compound 1, TCNQ‐based (TCNQ=7,7,8,8‐tetracyanoquinodimethane) organometallic compound {(Cu₂(μ‐Cl)(μ‐dppm)₂)(μ₂‐TCNQ)}_∞, was prepared and characterized on the self‐assembled monolayer (SAM) of 1‐octadecylmercaptan (C₁₈H₃₇SH) deposited onto Au electrode. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) results showed that the compound 1, dotted inside s‐BLM, can act as mediator for electron transfer across the membrane. Two redox peaks and the charge‐transfer resistance of 400 kΩ were observed for compound 1 inside s‐BLM. The mechanism of the electron transfer across s‐BLM by TCNQ is by electron hopping while TCNQ‐based organometallic compound is by conducting. Further conclusion drawn from this finding is that the TCNQ‐based organometallic compound embedded inside s‐BLM exhibits excellent electron transfer ability than that of free TCNQ. This opens a new path for the development of s‐BLM sensor and/or biosensor by incorporation with TCNQ‐based organometallic compounds.     

Atomic structure and formation mechanism of identically sized Au clusters grown on Si(111)-(7×7) surface

Identically sized Au clusters are grown on the Si(111)-(7×7) surface by room temperature deposition of Au atoms and subsequent annealing at low-temperature. The topographical images investigated by in situ scanning tunneling microscopy show a bias-dependent feature. The current-voltage properties measured by scanning tunneling spectroscopy indicate some semiconducting characteristics of the Au adsorbed surface, which is attributable to the saturation of Si dangling bonds. These experimental results, combined with the simulated scanning tunneling microscopy images and the first-principles adsorption energy calculations, show that the Au cluster is most likely to have a Au(6)Si(3) structure. In the Au(6)Si(3) cluster, three adsorbed Au atoms replace the three Si center adatoms, forming a hollow triangle, while the replaced Si atoms and other three Au atoms connect into a hexagon locating within the triangle. The formation mechanism of this atomic configuration is intimately associated with the complicated chemical valences of Au and the specific annealing conditions.     

基于能力培养的实验设计模式研究

传统基础型实验的设计缺陷,一定程度上制约了实践教学改革的深入。本文提出了一种基于能力培养的实验设计模式。该模式既保留了传统基础型实验内容,又充分体现以能力培养为核心的实践教学理念。教学实施表明,将该模式运用于基础型实验的教学,是一种训练学生基本实验技能和提升实践能力的有效途径。     

Synthesis and characterisation of polymeric materials consisting of {Fe2(CO)5}-unit and their relevance to the diiron sub-unit of [FeFe]-hydrogenase

By using "click" chemistry between a diazide and a diiron model complex armed with two alkynyl groups, two polymeric diiron complexes (Poly-Py and Poly-Ph) were prepared. The two polymeric complexes were investigated using infrared spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), M?ssbauer spectroscopy, and cyclic voltammetry (Poly-Py only, due to the insolubility of Poly-Ph). To probe the coordinating mode of the diiron units in the two polymeric complexes, two control complexes (3 and 4) were also synthesised using a monoazide. Complexes 3 and 4 were well characterised and the latter was further crystallographically analysed. It turns out that in both complexes (3 and 4) and the two polymeric diiron complexes, one of the two iron atoms in the diiron unit coordinates with one of the triazole N atoms. Our results revealed that both morphologies and properties of Poly-Py and Poly-Ph are significantly affected by the organic moiety of the diazide. Compared to the protonating behaviour of the complexes 3 and 4, Poly-Py exhibited proton resistance. In electrochemical reduction, potentials for the reduction of the diiron units in Poly-Py and hence its catalytic reduction of proton in acetic acid-DMF shifted by over 400 mV compared to those for complexes 3 and 4. It is likely that the polymeric nature of Poly-Py offers the diiron units a "protective" environment in an acidic medium and more positive reduction potential.