S2激光器泵浦源的设计

S2激光器产生的蓝—绿激光波长范围为430—520nm,根据理论计算,采用放电泵浦S2双原子分子的泵浦电流脉宽应小于30ns．以Blumlein电路作为泵浦源,设计合理的电路结构,传输线采用宽带引线,减小回路的寄生电感,实现了稳定的快脉冲放电,满足了对放电电流的要求,为放电激励是激光器产生激光提共了条件。     

考虑时滞效应与均值-方差效用的非零和投资与再保险博弈

在考虑时滞效应的影响下研究了非零和随机微分投资与再保险博弈问题.以最大化终端绝对财富和相对财富的均值-方差效用为目标,构建了两个相互竞争的保险公司之间的非零和投资与再保险博弈模型,分别在经典风险模型和近似扩散风险模型下探讨了博弈的Nash均衡策略.借助随机控制理论以及相应的广义Hamilton-Jacobi-Bellm...     

Simultaneous Determination of Seven Lipophilic and Hydrophilic Components in Salvia miltiorrhiza Bunge by LC-MS/MS Method and Its Application to a Transport Study in a Blood-Brain-Barrier Cell Model

Salvia miltiorrhiza Bunge (SM) has been extensively used in Alzheimer’s disease treatment, the permeability through the blood-brain barrier (BBB) determining its efficacy. However, the transport mechanism of SM components across the BBB remains to be clarified. A simple, precise, and sensitive method using LC-MS/MS was developed for simultaneous quantification of tanshinone I (TS I), dihydrotanshinone I (DTS I), tanshinone IIA (TS IIA), cryptotanshinone (CTS), protocatechuic aldehyde (PAL), protocatechuic acid (PCTA), and caffeic acid (CFA) in transport samples. The analytes were separated on a C18 column by gradient elution. Multiple reaction monitoring mode via electrospray ionization source was used to quantify the analytes in positive mode for TS I, DTS I, TS IIA, CTS, and negative mode for PAL, PCTA, and CFA. The linearity ranges were 0.1–8 ng/mL for TS I and DTS I, 0.2–8 ng/mL for TS IIA, 1–80 ng/mL for CTS, 20–800 ng/mL for PAL and CFA, and 10–4000 ng/mL for PCTA. The developed method was accurate and precise for the compounds. The relative matrix effect was less than 15%, and the analytes were stable for analysis. The established method was successfully applied for transport experiments on a BBB cell model to evaluate the apparent permeability of the seven components.     

船用双馈笼锥组合式宽带天线

实验研究了一类采用组合复用、双端馈电和套筒结构匹配等技术设计的用于船用短波超短波通信的小型宽带天线,详述了各物理结构参数对天线性能的影响.据此设计的天线在超过5个倍频程的带宽范围内,电压驻波比(VSWR)基本低于2.5,而尺寸远小于相同用途的传统盘锥、discage等天线.     

等离子体涂覆三维目标散射特性的PLRC-FDTD分析

采用分段线性递归卷积时域有限差分方法(PLRC-FDTD)分析等离子体覆盖三维目标的散射特性,分别计算了均匀和非均匀等离子体覆盖导体球的后向雷达散射截面.计算结果表明等离子体涂层选择合适的厚度、电子密度和碰撞频率,能够有效的减小目标的雷达散射截面.选择合适的参数,非均匀等离子体层有更好的隐身效果.     

CdSe波片6～12μm波段增透膜研究

采用垂直无籽晶气相升华法生长出直径37 mm的优质硒化镉(CdSe)单晶体,并沿光轴方向切割出20 mm×20 mm×3 mm的CdSe波片初胚.经研磨和抛光,在2～20μm波段CdSe波片的红外透过率约为70;.为进一步提高波片的透过率,采用Essential-Macleod软件辅助设计方案,选用YF3和ZnS为双层增透膜材料,并获得最佳的膜系厚度.镀膜后的CdSe波片在6～12μm波段透过率达到90;,在10.5μm处的透过率最高,峰值高达99;.     

基于器件结构提高TADF-OLED器件的发光性能

为了提高以TADF材料作为主体、天蓝色荧光材料作为客体的混合薄膜的OLED器件光电性能,我们调整了器件结构,使主体材料发挥其优势。制备了基本结构为ITO/NPB(40 nm)/DMAC-DPS∶x%BUBD-1(40 nm)/Bphen(30 nm)/LiF(0.5 nm)/Al的OLED器件。研究了主-客体材料在不同掺杂浓度下的OLED器件的光电特性。为了提高主体材料的利用率,在空穴传输层和发光层之间加入10 nm的DMAC-DPS作为间隔层;然后,在阳极和空穴传输层之间加入HAT-CN作为空穴注入层,形成HAT-CN/NPB结构的PN结,有效降低了器件的启亮电压(2.7 V)。测量了有无HAT-CN的单空穴器件的阻抗谱。结果表明,在最佳掺杂比例(2%)下,器件的外量子效率(EQE)达到4.92%,接近荧光OLED的EQE理论极限值;加入10 nm的DMAC-DPS作为间隔层,使得器件的EQE达到5.37%;HAT-CN/NPB结构的PN结有效地降低了器件的启亮电压(2.7 V),将OLED器件的EQE提高到5.76%;HAT-CN的加入提高了器件的空穴迁移率,降低了单空穴器件的阻抗。TADF材料作为主体材料在提高OLED器件的光电性能方面具有很大的潜力。     

传输线方程的高精度龙格−库塔数值求解方法

提出了一种求解传输线方程的高精度龙格-库塔(RK)方法。此方法在空间上采取高阶泰勒展开,提高了对空间微分的近似精度,减少了数值色散所带来的误差。与传统的时域有限差分法(FDTD)方法相比,在每波长采样数相同时,RK方法的计算精度更高。同时,根据Taylor模型,对外界平面波激励源进行离散,成功利用RK方法对外部场激励传输线进行求解,扩大了龙格-库塔方法在求解传输线方程时的应用范围。通过编程对平面波辐照下无限大地平面上的单导体与双导体的算例分别应用FDTD方法与RK方法进行了计算,验证了RK方法的正确性。结果表明同等计算条件下RK方法的计算精度更高。     

On fractional difference logistic maps: Dynamic analysis and synchronous control

This paper investigates a logistic map derived from a difference equation in the framework of discrete fractional calculus. Through the Poincaré plots and Julia sets, the map’s chaotic and fractal characteristics are studied comparing with those of a quadratic map to be proposed. The memory effect of fractional difference maps is reflected in these dynamics, and some reasonable explanations are given by combining with quantitative analysis. A coupled controller is designed to realize synchronization between fractional difference logistic map and fractional difference quadratic map.

     

Experimental validation of internal model approach for tracking control of a MEMS micromirror without angular velocity measurement

Nonlinear Dynamics - This paper addresses the angular tracking control for an electromagnetic MEMS micromirror. The problem is formulated in the output regulation framework for output feedback...