结构稳定的CuO/TiO2纳米管的功能化溶胶修饰法制备及其催化CO氧化性能研究

以水热处理方法得到的钛酸纳米管为载体,采用含有醋酸铜的功能化钛溶胶对其进行一步浸渍修饰,制备结构稳定的CuO修饰TiO₂纳米管催化剂(CuO/TiO₂NTs)。通过XRD(X-射线衍射)、TEM(透射电子显微镜)、HR-TEM(高倍透射电子显微镜)、XPS(X-射线光电子能谱)、BET(氮气吸附-脱附法)、TPD(程序升温脱附法)等表征材料的结构和性质,并研究其催化CO氧化的性能。研究表明：经过溶胶浸渍处理过程,不仅将功能化铜组分负载在纳米管上,而且纳米管载体的耐热性能明显提高;催化剂载体、铜钛原子比及焙烧温度对催化剂的活性有明显影响,且400℃焙烧的Cu/Ti原子比为1∶5的CuO/TiO₂NTs的活性最高。     

电化学还原预处理对BiVO_4薄膜电极光电化学氧化水性能的提高

在酸性水溶液中(pH=2.0),采用电化学还原(ER)方法对BiVO4薄膜电极进行预处理,并探讨了其对薄膜电极光电化学氧化水性能的影响.结果表明,这种预处理可显著提高电极的光电化学氧化水的性能,且具有良好的光电化学稳定性.利用扫描电子显微镜、X射线衍射、拉曼光谱、光电子能谱、紫外-可见漫反射光谱、荧光光谱、电化学阻抗谱及Mott-Schottky等方法对ER处理前后的电极进行了表征.结果表明,ER预处理使电极粗糙度增大,表面积增大约1.4倍;电极材料的晶型无明显变化,但V—O对称伸缩振动略有红移;表面Bi,V和O结合能变小,Bi3+部分被还原,Bi/V原子比增大;ER处理导致电极平带电位负移,光生载流子在薄膜电极/溶液界面转移速率加快,表面复合速率降低.这些变化和表面积增加是BiVO4电极光电化学性能提高的主要原因.     

基于微流控技术的蛋白质结晶及其筛选方法的研究进展简

微流控技术以其高通量、低消耗和集成化等优点成为蛋白质结晶微型化研究的重要手段. 本文综述了基于微流控技术的蛋白质结晶技术和方法,主要包括微泵微阀、液滴(Droplet)、滑动芯片(SlipChip)以及液滴实验室(DropLab)等技术. 此外,还针对当前膜蛋白在结构生物学研究中的重要地位,综述了应用于膜蛋白结晶的微流控技术的研究进展.     

水下超疏油聚(3,4-乙烯基二氧)噻吩薄膜的制备简

以离子液体溴化(1-己基-3-甲基咪唑盐)作为电解质和掺杂剂采用电化学一步法制备了微纳米复合结构的聚(3,4-乙烯基二氧噻吩)薄膜,薄膜由槽内排布着纳米珠链的棒状结构组成. 研究表明,通过控制电流密度的大小,可以调节棒状结构和珠状结构的平均直径. 离子液体中的咪唑阳离子和对阴离子均掺杂到聚合物中,该薄膜具有可逆的电化学活性及水下超疏油特性.     

碳纤维基PtPb阳极催化剂的制备及其电催化性能

以静电纺丝技术与烧结工艺相结合的方式制备了碳纤维基PtPb纳米催化剂,并采用X射线衍射（XRD）、红外光谱（FT-IR）、扫描电镜（SEM）等分析测试手段对其进行了表征。结果表明,在预氧化温度为300 ℃、碳化温度为800 ℃的条件下,所制备的PtPb阳极纳米催化剂结晶程度好、比表面积大,粒径约为3.05 nm,催化活性颗粒均匀分散在多孔碳纤维骨架上。采用循环伏安法（CV）及交流阻抗（EIS）评价了该催化剂对乙醇氧化反应的电催化性能。结果表明,最大峰电流密度达到125 mA/cm²,电荷转移电阻相较于700 ℃下降了近60%。     

循环流化床富氧气化实验研究

在循环流化床富氧气化实验台上,通过调节水蒸气流量使气化温度基本稳定在910℃,研究了不同氧气浓度及气化当量比对煤气组分、产气率、冷煤气效率及碳转化率的影响。结果表明,氧气浓度从25%增加至40%时,N2体积分数从48.82%降低至33.83%,H2从21.47%不断增加至27.59%,CH4基本不变;受水蒸气流量影响,氧气浓度高于35%时,CO体积分数降低,CO2体积分数增加;氧气浓度40%时的煤气热值为空气气化煤气热值的1.84倍,产气率随氧气浓度增加从2.35 m3/kg降至2.13 m3/kg,冷煤气效率和碳转化率不断增大;当气化当量比从0.20增加至0.29时,N2体积分数先降低后升高,H2体积分数从24.01%增加到25.46%后基本保持不变,CO和CH4持续减小,CO2不断增加,产气率由1.94 m3/kg升高到2.29 m3/kg;受水蒸气和气化当量比综合影响,冷煤气效率先增大后减小,碳转化率持续增加。     

水热法改性褐煤及含氧官能团与水相互作用的研究

利用水热法对蒙东褐煤进行了改性。通过微量热仪测定和分析了煤炭表面骨架大分子和各种官能团与水结合能的大小。结果表明,水热法改性后,褐煤中的羧基和羰基随温度升高显著降低,而羟基的变化比较复杂。计算得到了低阶煤中含氧官能团和煤炭表面骨架大分子亲水能力由大到小的顺序是羧基酚羟基羰基煤炭表面骨架大分子。     

FT-IR和SEM用于煤阶对煤催化加氢气化影响的研究

基于加压固定床反应器研究了不同煤阶的煤催化加氢气化效果,对比了煤阶对催化剂添加量、甲烷释放速率以及产品气组成的影响。原煤及气化残渣采用FT-IR和SEM进行表征分析。研究结果表明,不添加催化剂情况下,随着煤阶的升高原煤气化反应性降低,低阶煤的甲烷释放分为两个阶段;加入催化剂之后,3种煤中以神府烟煤的反应性最好,遵义无烟煤和云南褐煤反应性较差。SEM和FT-IR表征结果表明,高阶煤颗粒表面更加光滑、煤结构致密,而煤中的脂肪族结构以及芳香结构振动峰强度随煤阶的降低而升高,催化剂的加入使得脂肪结构吸收峰明显加强。这些差异导致不同煤样催化加氢气化反应活性不同。     

Highly efficient N-glycoproteomic sample preparation by combining C18 and graphitized carbon adsorbents

Conventional N-glycoproteome analysis usually applies C₁₈ reversed-phase (RP) adsorbent for sample purification, which will lead to unavoidable sample loss due to the high hydrophilicity of N-glycopeptides. In this study, a porous graphitized carbon (PGC) absorbent was combined with a C₁₈ adsorbent for N-glycopeptide purification in comprehensive N-glycoproteome analysis based on the hydrophobic and polar interactions between carbon and N-glycans. It was observed that the small hydrophilic N-glycopeptides that cannot retain onto C₁₈ adsorbent can be captured by the graphitized carbon, while the large hydrophobic N-glycopeptides that cannot retain onto the graphitized carbon can be feasibly captured by the C₁₈ adsorbent. Comparing with sample purification by using C₁₈ adsorbent only, 28.5 % more N-glycopeptides were identified by combining both C₁₈ and PGC adsorbents. The C₁₈-PGC strategy was further applied for both sample purification and pre-fractionation of a complex protein sample from HeLa cell. After hydrophilic interaction chromatography enrichment, 1,484 unique N-glycopeptides with 1,759 unique N-glycosylation sites were finally identified.

The detection of T-Nos,a genetic element present in GMOs,by cross-priming isothermal amplification with real-time fluorescence

An isothermal cross-priming amplification (CPA) assay for Agrobacterium tumefaciens nopaline synthase terminator (T-Nos) was established and investigated in this work. A set of six specific primers, recognizing eight distinct regions on the T-Nos sequence, was designed. The CPA assay was performed at a constant temperature, 63 °C, and detected by real-time fluorescence. The results indicated that real-time fluorescent CPA had high specificity, and the limit of detection was 1.06?×?10³ copies of rice genomic DNA, which could be detected in 40 min. Comparison of real-time fluorescent CPA and conventional polymerase chain reaction (PCR) was also performed. Results revealed that real-time fluorescent CPA had a comparable sensitivity to conventional real-time PCR and had taken a shorter time. In addition, different contents of genetically modified (GM)-contaminated rice seed powder samples were detected for practical application. The result showed real-time fluorescent CPA could detect 0.5 % GM-contaminated samples at least, and the whole reaction could be finished in 35 min. Real-time fluorescent CPA is sensitive enough to monitor labeling systems and provides an attractive method for the detection of GMO.