High-throughput biophysical measurement of human red blood cells

This paper reports a microfluidic system for biophysical characterization of red blood cells (RBCs) at a speed of 100-150 cells s(-1). Electrical impedance measurement is made when single RBCs flow through a constriction channel that is marginally smaller than RBCs' diameters. The multiple parameters quantified as mechanical and electrical signatures of each RBC include transit time, impedance amplitude ratio, and impedance phase increase. Histograms, compiled from 84,073 adult RBCs (from 5 adult blood samples) and 82,253 neonatal RBCs (from 5 newborn blood samples), reveal different biophysical properties across samples and between the adult and neonatal RBC populations. In comparison with previously reported microfluidic devices for single RBC biophysical measurement, this system has a higher throughput, higher signal to noise ratio, and the capability of performing multi-parameter measurements.     

Carbonyl amine/Schiff base ligands in manganese complexes: theoretical study on the mechanism, capability of NO release

A compound having the capability of releasing NO upon exposure to visible or near-infrared (vis or NIR) light could be a potential candidate for photodynamic therapy (PDT), which is significant for humans. Here, we investigated a series of Mn(II) complexes (a-d) based on density functional theory (DFT) to illuminate the mechanism of their behavior of releasing NO. Their structural, spectroscopic, and photodissociable properties were calculated by quantum theoretical methods to give a detailed and warranted explanation of the performance of releasing NO. The results indicate that, for a-d, releasing NO was attributed to the electron transfer from d(yz)/d(xz)(Mn) orbitals to π*(NO) orbitals at the second excited triplet state (T(2)). Importantly, we confirmed the finding in the experiment that d could release NO upon exposure to the NIR region and, thus, may be a best candidate for PDT in a-d. Therefore, to take d for example, the analyses of the potential energy curves (PECs) of difference states and electron density difference between the T(2) and the ground state (S(0)) were performed to further provide evidence of ligand dissociation and release of NO at the T(2) state. Finally, we hope that our discussion can provide assistance to understand the behavior of the release of NO and design novel photodissociable transition metal nitrosyls for PDT applications.     

Photoelectron spectroscopy and density functional calculations of CuSi(n)- (n = 4-18) clusters

We conducted a combined anion photoelectron spectroscopy and density functional theory study on the structural evolution of copper-doped silicon clusters, CuSi(n)(-) (n = 4-18). Based on the comparison between the experiments and theoretical calculations, CuSi(12)(-) is suggested to be the smallest fully endohedral cluster. The low-lying isomers of CuSi(n)(-) with n ≥ 12 are dominated by endohedral structures, those of CuSi(n)(-) with n < 12 are dominated by exohedral structures. The most stable structure of CuSi(12)(-) is a double-chair endohedral structure with the copper atom sandwiched between two chair-style Si(6) rings or, in another word, encapsulated in a distorted Si(12) hexagonal prism cage. CuSi(14)(-) has an interesting C(3h) symmetry structure, in which the Si(14) cage is composed by three four-membered rings and six five-membered rings.     

Highly selective stir bar coated with dummy molecularly imprinted polymers for trace analysis of bisphenol A in milk

A water compatible molecularly imprinted polymers (MIPs) coated stir bar for bisphenol A(BPA) was prepared with 3,3',5,5'-tetrabromobisphenol A as the dummy template molecule in this study. The dummy molecularly imprinted polymers coated stir bar (DMIPs-SB) showed better selectivity than the bars coated with polydimethylsiloxane or non-imprinted polymers when used to extract BPA and its three analogues. The saturated adsorption amount of the DMIPs coating was 3.0 times over that of the non-imprinted polymers coating. To achieve the optimum extraction performance, several parameters, including extraction and desorption time, pH value, adsorption temperature and stirring speed were investigated. The high-performance liquid chromatography combined with the DMIPs-SB was employed in the analysis of BPA in aqueous solution. The linear range of BPA concentration in aqueous medium was 0.0228-2.28 ng/mL with correlation coefficient of 0.9994 and the detection limit was about 6.84 × 10(-3) ng/mL based on three times ratio of signal to noise. This method was directly applied to the determination of trace BPA in milk with satisfactory results.     

Magnetic nanosized {M(II)24}-wheel-based (M = Co, Ni) coordination polymers

Two 3D coordination polymers, [Co(24)(OH)(12)(SO(4))(12)(ip)(6)(DMSO)(18)(H(2)O)(6)]·(DMSO)(6)(EtOH)(6)(H(2)O)(36) (1·guests, ip = isophthalate) and [Ni(24)(OH)(12)(SO(4))(12)(ip)(6)(DMSO)(12)(H(2)O)(12)]·(DMSO)(6)(EtOH)(6)(H(2)O)(20) (2·guests), constructed with nanosized tetraicosanuclear Co(II) and Ni(II) wheels are solvothermally synthesized. Both complexes show intra- and interwheel dominant antiferromagnetic interactions.     

Analysis of fumonisins B1 and B2 in spices and aromatic and medicinal herbs by HPLC-FLD with on-line post-column derivatization and positive confirmation by LC-MS/MS

Fumonisins are produced by the fungus Fusarium verticillioides, which are known to cause fatal diseases in some animals and humans. Here, we describe a sensitive, reproducible and reliable analytical method for the quantitative determination of fumonisins B(1) (FB(1)) and B(2) (FB(2)) in 112 spices and aromatic and medicinal herbs marketed in China. This method is based on high performance liquid chromatography and fluorescence detection (HPLC-FLD) coupled to a new on-line post-column derivatization using ortho-phthaldialdehyde with 2-mercaptoethanol and immunoaffinity column clean-up. Under the optimized experimental conditions, a complete separation of FB(1) and FB(2) was obtained using a Synergi C(18) column and a gradient elution at 0.8 mL min(-1) with methanol and 0.1 M phosphate buffer at pH 3.15. The limits of detection for FB(1) and FB(2) were both 40 μg kg(-1). Good recoveries were found for spiked samples with FB(1) and FB(2), ranging from 82.34% to 98.16% for FB(1) and from 72.58% to 97.10% for FB(2), with relative standard deviation (RSD) < 7.0%. 5 spices, 11 aromatic herbs and 96 medicinal herbs including 93 normal samples and 19 visibly moldy samples, which were spoiled artificially, were analyzed. The results showed that 8 (42.1%) visibly moldy samples and 8 (8.6%) normal samples were contaminated with FB(1) at mean contents of 129.0 and 165.9 μg kg(-1), and with FB(2) at 1745.0 and 256.8 μg kg(-1), respectively. Positive confirmation of detected samples was performed by liquid chromatography tandem electrospray ionization mass spectrometry (LC-ESI-MS/MS), using a triple quadrupole analyzer and operated in the multiple reaction monitoring mode.     

C60大量、快速分离和电喷雾电离质谱检测

本文用配合沉淀和活性炭吸附相结合的方法，从高级富勒烯含量较高的混合物中，大量、快速分离Ｃ６０，并用电喷雾电离质谱对分离产物进行检测     

细胞色素b5Glu44,Glu56的定点突变和蛋白质结构比较

用寡聚核苷酸定点突变的方法将牛肝细胞色素ｂ５基因上第４４位和５６位谷氨酸的密码子ＧＡＡ变成氨酸的密码子ＧＣＴ，获得突变体Ｅ４４Ａ，Ｅ５６Ａ和Ｅ４４／５６Ａ的基因。 它们分别克隆于ＰＵＣ１９上，转化大肠杆菌ＪＭ８３后，突变基因得到成功的表达。     

气相色谱法测定线虫中的脂肪酸含量

ematode is a small organism and the traditional purification method needs a lot of nematodes , but it is difficult for us to foster many nematodes.The fatty acids in nematode were esterified directly in our analytical method,so that,the error is reduced the and sensitivity is improved. The results showed that thisimproved analysis method could be used for rapid and satisfactory determination of the fatty acid change during storagr of this group of nematodes.     

烷氧基取代金属酞菁固态薄膜光谱及结构的研究

本文选用一种烷氧基取代的金属酞菁化合物,溶解旋涂于玻璃基板上,分别经有机溶剂处理和加热处理,发现都可以使吸收光谱范围向长波方向拓宽。X-射线衍射研究表明:经上述方法处理后都可使染料分子的聚集程度发生变化,堆砌方式由微晶型向晶型结构转变,高分辩率扫描电镜观察进一步证实了上述结果。