Infrared spectra of aluminum hydrides in solid hydrogen: Al2H4 and Al2H6

The reaction of laser-ablated Al atoms and normal-H(2) during co-deposition at 3.5 K produces AlH, AlH(2), and AlH(3) based on infrared spectra and the results of isotopic substitution (D(2), H(2) + D(2) mixtures, HD). Four new bands are assigned to Al(2)H(4) from annealing, photochemistry, and agreement with frequencies calculated using density functional theory. Ultraviolet photolysis markedly increases the yield of AlH(3) and seven new absorptions for Al(2)H(6) in the infrared spectrum of the solid hydrogen sample. These frequencies include terminal Al-H(2) and bridge Al-H-Al stretching and AlH(2) bending modes, which are accurately predicted by quantum chemical calculations for dibridged Al(2)H(6), a molecule isostructural with diborane. Annealing these samples to remove the H(2) matrix decreases the sharp AlH(3) and Al(2)H(6) absorptions and forms broad 1720 +/- 20 and 720 +/- 20 cm(-1) bands, which are due to solid (AlH(3))(n). Complementary experiments with thermal Al atoms and para-H(2) at 2.4 K give similar spectra and most product frequencies within 2 cm(-1). Although many volatile binary boron hydride compounds are known, binary aluminum hydride chemistry is limited to the polymeric (AlH(3))( solid. Our experimental characterization of the dibridged Al(2)H(6) molecule provides an important link between the chemistries of boron and aluminum.     

Zinc and cadmium dihydroxide molecules: matrix infrared spectra and theoretical calculations

Laser-ablated zinc and cadmium atoms were mixed uniformly with H2 and O2 in excess argon or neon and with O2 in pure hydrogen or deuterium during deposition at 8 or 4 K. UV irradiation excites metal atoms to insert into O2 producing OMO molecules (M = Zn, Cd), which react further with H2 to give the metal hydroxides M(OH)2 and HMOH. The M(OH)2 molecules were identified through O-H and M-O stretching modes with appropriate HD, D2, (16,18)O2, and (18)O2 isotopic shifts. The HMOH molecules were characterized by O-H, M-H, and M-O stretching modes and an M-O-H bending mode, which were particularly strong in pure H2/D2. Analogous Zn and Cd atom reactions with H2O2 in excess argon produced the same M(OH)2 absorptions. Density functional theory and MP2 calculations reproduce the IR spectra of these molecules. The bonding of Group 12 metal dihydroxides and comparison to Group 2 dihydroxides are discussed. Although the Group 12 dihydroxide O-H stretching frequencies are lower, calculated charges show that the Group 2 dihydroxide molecules are more ionic.     

固固反应合成三碘化锑、三碘化铋与硫脲配合物

通过三碘化锑和三碘化铋与硫脲间的室温固固反应合成了三碘化锑、三碘化铋的硫脲配合物 ,其组成为 :M[CS( NH2 ) 2 ]3 I3 ( M=Sb,Bi)。两种配合物的晶体结构均属于单斜晶系 ,锑配合物 Sb[CS( NH2 ) 2 ]3 I3 的晶胞参数为 :a=1 .4 772 nm,b=1 .6 5 82 nm,c=2 .0 6 74 nm,β=90 .81°,铋配合物 Bi[CS( NH2 ) 2 ]3 I3 的晶胞参数为 :a=1 .4 0 1 0 nm,b=2 .0 1 6 8nm,c=2 .0 397nm,β=90 .84°。远红外光谱表明硫脲中的 N原子而非硫原子参与了配位     

铂电极上异黄樟油和胡椒醛电氧化的SERS研究

采用循环伏安(CV)法和原位表面增强拉曼光谱(SERS)技术, 研究了非水体系中反应物异黄樟油和目标产物胡椒醛在粗糙铂电极上的电氧化行为, 发现胡椒醛在电位≥1.50 V时将进一步氧化, 而且从分子水平证实, 在胡椒醛的氧化电位(≥1.50 V) 下, 波长为632.8 nm的激光对胡椒醛的氧化有助催化作用. 由异黄樟油直接电氧化合成胡椒醛的电位(E)应控制在1.20 V相似文献   

二氧化钛纤维表面担载Pt纳米结构的原子力显微镜研究

通过原子力显微镜研究了二氧化钛纤维表面担载Pt的表面形貌及其结构.结果表明,TiO2纤维表面担载的Pt具有微米尺度的近似六边形或者近似长方形的结构,与在单晶TiO2(110)表面的Pt纳米簇形貌相似,但尺度较大.TiO2纤维担载的Pt表面明显存在不同高度的台阶结构,台阶高度以2~4倍Pt(111)晶面面间距的高度为主.由Pt在TiO2纤维表面的形貌与纤维的纳米晶粒排布有序性推测可知,Pt与TiO2纤维存在强的相互作用,可能正是这种强相互作用和表面台阶结构才使TiO2表面担载的Pt虽是微米尺寸但仍具有高光催化活性.     

Effects of EG and MoSi2 on thermal degradation of intumescent coating

An intumescent flame retardant coating was prepared with resin, solvent and flame retardant system composed of ammonium polyphosphate-APP, pentaerythritol-PER and melamine-MEL. The modifiers such as molybdenum disilicide (MoSi₂) and expandable graphite (EG) were used to improve the performances of the APP-PER-MEL coating. The effects of EG, MoSi₂ and MoSi₂/EG on the fireproofing time and char formation of the coating were investigated by using heat insulation test, thermogravimetric analysis (TGA), differential thermal analysis (DTA), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electric microscope (SEM). The results showed that by adding modifiers, the fireproofing time was prolonged and char formation rate was evidently enhanced. The largest improvement was achieved with 9 wt.% MoSi₂/5 wt.% EG, XPS analysis indicated that the performance of anti-oxidation of the coating was improved by adding EG and MoSi₂, and SEM images showed that a good synergistic effect was obtained through a ceramic-like layer produced by MoSi₂ covered on the surface of “open-cellular” structural char.     

Selective detection of Fe(III) ions in aqueous solution with a 1,8-diacridylnaphthalene-derived fluorosensor

The syn-isomer of 1,8-bis(4,4′-diisopropyl-9,9′-diacridyl)naphthalene, 1, has been prepared by two consecutive Pd(PPh₃)₄-catalyzed Stille cross-coupling steps. This highly congested sensor undergoes Fe(III)-selective fluorescence quenching in water/acetonitrile even in the presence of excess of other metal ions.     

新型Zhuo酚酮类糖苷化合物的合成

根据Zhuo酮的结构特点，对Zhuo酚酮类化合物与半乳糖的Kenigs-Knorr反应进 行了研究。探索出一种具有较高立体选择性的合成方法，从而制得四种具有β－构 型的单一端基异构体的Zhuo酚酮半乳糖苷新化合物。生成的新化合物不但保持了原 有的生理活性，而且降低了毒性、提高了药效，为人工合成Zhuo酚酮类增添新化合 物的同时，也扩展了此类化合物的应用领域。应用元素分析、核磁共振、红外光谱 表征了它们的结构。     

266nm脉冲激光光解基质隔离的cis-(NO)2

NO的氧化是大气化学研究的重要课题．CIS－（NO）。是一氧化氮氧化过程的中间体，对其在低温基质条件下的形成和氧化过程研究前文风已作了报导．H。WhiffS等门曾用中压汞灯作为光解光源（220－320urn），研究了ets－（NO）。在Ar低温基质中的光解，产物为N。O和NZO3．CIS－（NO     

聚苯乙烯型离子交换树脂的研究进展

介绍了聚苯乙烯型离子交换树脂的合成方法;综述了近年来在氯甲基化反应、Mannich反应以及磺化反应上的新进展、新理论：从结构上对聚苯乙烯型离子交换树脂的强度和热稳定性进行了分析。聚苯乙烯型离子交换树脂具有稳定的物理化学性质、吸附选择独特、再生容易、操作简便、使用周期长等优良性能,大大促进了化工企业、制药工业、环保、医疗、分析等行业的发展,具有广阔的发展前景。