Differential determination of arsenic(III) and total arsenic using flow injection on-line separation and preconcentration for graphite furnace atomic absorption spectrometry

Arsenic(III) can be quantitatively extracted using sodium diethyldithiocarbamate (NaDDTC) as the complexing agent and C18 reversed phase packing as the column material for solid phase extraction. Arsenic(V) must be reduced to its trivalent oxidation state prior to extraction. A mixture of sodium sulphite, hydrochloric acid, sodium thiosulphate and potassium iodide was found to be optimum for on-line reduction. When the sorbent extraction is carried out without and with the addition of the reduction mixture, arsenic(III) and total arsenic can be determined sequentially by graphite furnace atomic absorption spectrometry with detection limits (3 σ) of 0.32 ng for As(III) and 0.43 ng for total arsenic. A 7.6-fold enhancement in peak area compared to direct injection of 40 μl samples was obtained after 60 s preconcentration. Results obtained for sea water standard reference materials, using aqueous standards for calibration, agree well with certified values. A precision of 5.5% RSD was obtained for total arsenic in a sea water sample (1.65 As). Results obtained for synthetic mixtures of trivalent and pentavalent arsenic agreed well with expected values.     

Fluorides of ruthenium and chromium: Theoretical studies

The electronic and structural characteristics of CrF₅, CrF₄, RuF₅ and RuF₄ were studied. Ab initio (SCF-CI) calculations were performed with different structures and spin states for each complex. The favored conformation always corresponds to the highest multiplicity: doublet for CrF₅ in D_3h, triplet for CrF₄ in T_d, quadruplet for RuF₅ in C_4v and quintuplet for RuF₄ in D_4h symmetry.     

Analysis of atmospheric particular matter and water using atomic emission spectrometry with inductively-coupled plasma and two-jet plasmatron

Summary A method for the atomic emission spectrometric analysis of air and water with inductively coupled and two-jet direct current plasmas has been developed. The method has been applied to the determination of impurity contents with good accuracy and sensitivity.     

用离子束混合及快速热处理方法形成钽的硅化物

本文描述用离子束透过钽金属膜进行混合和快速热处理方法来形成钽的硅化物.用溅射方法在P型硅衬底上淀积一层金属钽,然后用砷离子束透过钽金属模进行混合,采用快速热处理后形成了平整的硅化钽薄层.使用厚度为500埃的钽金属膜,得到钽的硅化物薄层电阻为5.5Ω/□.研究了砷离子能量、剂量及钽膜厚度对钽的硅化物薄层电阻的影响.用透射电镜和台阶仪对所形成的硅化钽进行了分析和厚度测量.     

Use of the Apparent Content Curves for the spectrophotometric identification of substances: identification of amphetamines

The possibility of identification of substances which have similar spectral behaviour by means of Apparent Content Curves has been studied. This study is carried out with absorption, excitation and emission spectra of several amphetamines of widespread pharmaceutical use. Results obtained show that amphetamine, phenylpropanolamine, pseudoephedrine, phenylephrine, epinephrine, dopamine and methoxyamphetamine can be identified with a probability of >95%.     

Determination of glycols by HPLC with refractive index detection

A simple and fast HPLC method for the determination of glycols is described. It is characterized by a reversed-phase separation using water as eluent and a refractive index detection. The method was applied to investigate the biodegradation of glycols in a laboratory activated sludge plant and to determine the content of glycols or alcohols in detergents. The detection limit is 4 mg/l ethylene glycol or propylene glycol in an aqueous sample.     

Raman spectroscopy of carbon fibres

Investigations of coated carbon fibres are reported using Raman spectroscopy. Relationships between different process parameters (for example precursor concentration, reactor temperature and various precursors) and the resulting types of carbon fibres are discussed.     

Comparison of four quantification methods for the determination of PCB in transformer oils

The analysis of PCB in transformer oils has been achieved with three HRGC/ECD based methods, proposed by the International Electrotechnical Commission (IEC/TC 10), by the Comité Européen de Normalisation (CEN/TC 19/WG 22) and by the Deutsches Institut für Normung (DIN 51 527). The same clean-up, described in the CEN/TC 19/WG 22, has been used for all the samples, allowing a comparison of the quantification procedure only. The total chlorine content has also been determined with X-ray fluorescence. These different methods of quantification are compared and their application for legislative purposes is discussed.Dedicated to Professor Dr Dieter Klockow on the occasion of his 60th birthday