聚苯基膦酸二苯砜酯对PET凝聚相阻燃作用的研究

采用热重分析、Ｘ－射线光电子能谱和红外光谱分析等手段，研究了含聚苯基膦酸二苯砜酯（ＰＳＰＰＰ）的聚对苯二甲酸乙二酯（ＰＥＴ）阻燃体系的热化学，探讨了ＰＳＰＰＰ对ＰＥＴ的阻燃机理．ＰＳＰＰＰ的加入，明显改变了ＰＥＴ的热分解行为：ＰＳＰＰＰ拓宽了ＰＥＴ的分解温度范围，降低了ＰＥＴ在可燃温度范围内的分解产物的量；在ＰＥＴ的点燃温度以下，ＰＳＰＰＰ对ＰＥＴ的降解起到一定的促进作用，而在点燃温度以上，产生的降解产物有利于促进炭化．４００℃以上，ＰＥＴ和ＰＳＰＰＰ的结构发生了明显的变化，所产生的结构有利于ＰＥＴ的降解，使ＰＥＴ的分子量急剧减小，粘度下降，易于形成熔滴，有利于促使着火部分离开火源，增加燃烧的ＰＥＴ表面的物质损耗和热损耗，起到阻燃作用．     

POLYMER-PLATINUM COMPLEX CATALYSTS FOR OXIDATION OF METHANOL TO FORMALDEHYDE

Two kinds of polymer-platinum complexes: silica-supported poly-γ-diphenylphosphinopropylsiloxane-platinum complex and silica-supported polyphenylsilazane-platinum complex, have been found very active and selective in catalyzation of oxidation of methanol to formaldehyde at room temperature and under an atmospheric oxygen pressure. Their catalytic activities are greatly affected by P or N/Pt gram atomic ratio.     

COORDINATION COPOLYMERIZATION OF STYRENE WITH MALEIC ANHYDRIDE BY RARE-EARTH COORDINATION CATALYSTS

The study on coordination copolymerization of styrene (S) with maleic anhydride (MA) by rare-earth coordination catalysts, NdL_3-Al(i-Bu)_3, has been successfully carried out for the first time. Some features, kinetic behavior, and mechanism of the SMA copolymerization by Nd(naph)_3-Al(i-Bu)_3 system are described and discussed. The copolymex of styrenemaleic anhydride prepared by the NdL_3-Al(i-Bu)_3 systems in benzene at 50℃ is an alternating-rich white powder having high number-average molecular weight of 6—8.5×10~5. The overall activation energy for the polymerization was found to be 10.5KJ/mol. The polymerization was not suppressed by addition of hydroquinone. The catalytic activity of various ligands in NdL_3 for the copolymerization decreases in the following order: Nd (naph)_3>Nd-(P_(507))_3～NdCl_3-6H_2O>Nd(P_(204))_3>Nd(acac)_3. 3H_2O. The experimental results are explained based on a mechanism to be the coordination-type copolymerization in terms of the participation of a monomer-monomer c     

阿奇霉素片及胶囊剂溶出度考察

采用硫酸显色法对两家药厂生产的阿奇霉素片及胶囊剂进行了溶出度考察。结果表明，阿奇霉素在10－100μg/mL范围内线性关系良好，平均 回收率为99．83％（n=6)。阿奇霉素片及胶囊剂在45min时的溶出量均不低于标示量的80％。而两厂产品体外溶出度结果均达到要求。     

催化裂化汽油脱硫添加剂USY/ZnO/Al2O3的性能评价

 在固定流化床催化裂化装置上，以减压蜡油为原料，对制备的U\r\nSY／ZnO／Al2O3催化裂化汽油脱硫添加剂的性能进行了评价．结果表明\r\n，随着添加剂添加量和剂油比的增加，生成汽油的硫含量降低．在500\r\n℃和剂油比为5的条件下，在FCC平衡催化剂中添加30％的添加剂时，汽\r\n油的硫含量可由不加添加剂时的1230μg／g降低到770μg／g左右．添\r\n加剂的添加量（10％）较低时，对催化裂化产物的分布基本没有影响；\r\n添加30％的添加剂时，焦炭的产率有所增加，但汽油收率基本不变．X\r\nRD表征结果表明，USY／ZnO／Al2O3添加剂中的ZnO对USY的晶相结构有\r\n一定的破坏作用，但随着反应与再生次数的增多，ZnO与Al2O3之间形成\r\n较为稳定的锌铝尖晶石结构，使添加剂的性能趋于稳定．     

微量元素对人体健康的影响

阐述了微量元素的生理作用以及对人体健康的影响和微量元素平衡的重要性，对临床医学及日常生活有一定的参考价值。     

制备高比表面积碳化硅的几种影响因素

采用溶胶凝胶法，以蔗糖和正硅酸乙酯(TEOS)为原料，草酸为TEOS水解的催化剂，制备均相碳化硅前驱体，在氩气氛和高温条件下(1 350～1 600 ℃)将碳化硅先驱体进行碳热还原，制备出高比表面积的SiC。考察了水/TEOS物质的量的比、碳/硅物质的量的比及镍盐等因素对碳化硅比表面积的影响。结果表明，当n_water/n_TEOS=7.5，n_C/n_Si=4时，适宜的镍催化剂(n_Ni/n_TEOS=0.005)，凝胶形成的时间最短，镍盐的加入可使碳热还原温度降低200 ℃。     

Crystal Structure of Dimethylamine 3,5-Dinitrobenzoic Acid Organic Adduct

1 INTRODUCTION Nonlinear optics (NLO) is at the forefront of cur- rent researches because of its importance in provi- ding the key functions of frequency shifting, optical modulation, optical switching, optical logic and op- tical memory for the emerging …     

JD树脂刻蚀及涂层的XPS研究

ＪＤ光学树脂表面刻蚀过程的ＸＰＳ研究表明，引进树脂遥ＣＯＨ，Ｃ＝Ｏ，Ｃ－ＳＯ３Ｈ，ＣＯＯＨ等基因随刻蚀温度的提高或时间的延长而增加，对其相对含量进行了计算，固化后的耐磨涂层具有ＳｉＯ２结构，ＪＤ板材的最佳刻蚀条件为２０℃，２０ｍｉｎ。     

GAS PERMEABILITY OF COPOLY(1-TRIMETHYL-SILYL-1-PROPYNE-PENTAMETHYL-DISILYL-1-PROPYNE) MEMBRANE

The permeability of copoly (1-trimethylsilyl-1-propyne-pentamethyldisilyl-1-propyne) membrane for twelve gases (0_2, N_2, CO_2, H_2, D_2, He, At, CH_4, C_2H_4, C_2H_6, C_3H_6 and C_3H_8) was examined. The basic laws of solution and diffusion of the gases in the membrane were expounded preliminarily. It was found that a linear relationship between logarithm of diffusion coefficient (D) and critical molar volume (V_c) of the gases. The permeation characteristics of the gases in the copoly (1-trimethylsilyl-1-propyne-pentamethyldisilyl-1-propyne) membrane was also discussed.