Synthesis,Characterization and Application of Amine-Functionalized Hierarchically Micro-Mesoporous Silicon Composites for CO2 Capture in Flue Gas

An efficient CO₂ adsorbent with a hierarchically micro-mesoporous structure and a large number of amine groups was fabricated by a two-step synthesis technique. Its structural properties, surface groups, thermal stability and CO₂ adsorption performance were fully investigated. The analysis results show that the prepared CO₂ adsorbent has a specific hierarchically micro-mesoporous structure and highly uniformly dispersed amine groups that are favorable for the adsorption of CO₂. At the same time, the CO₂ adsorption capacity of the prepared adsorbent can reach a maximum of 3.32 mmol-CO₂/g-adsorbent in the actual flue gas temperature range of 303–343 K. In addition, the kinetic analysis results indicate that both the adsorption process and the desorption process have rapid adsorption/desorption rates. Finally, the fitting of the CO₂ adsorption/desorption experimental data by Avrami’s fractional kinetic model shows that the CO₂ adsorption rate is mainly controlled by the intra-particle diffusion rate, and the temperature has little effect on the adsorption rate.     

实测卫星频谱占用状态拟合与预测方法

由于在不同时间、不同空间卫星接收数据底噪是动态起伏的,传统建模固定门限的方法存在缺陷。本文在时间维度上对卫星频谱感知数据的频谱占用模型进行分析,利用自适应阈值法确定噪声门限,对卫星频谱数据进行预处理,得到卫星频谱占用长度序列。为对卫星频谱的态势进行有效的统计分析,利用泊松分布和指数分布方法对频谱占用时间长度序列的概率密度曲线进行拟合,得到了适用于卫星频谱占用时间序列的概率分布模型。基于所得的卫星频谱占用状态模型,通过两状态马尔可夫链计算出卫星信道某一频点的状态转移矩阵,从而预测出信道占用和空闲的概率。利用卫星频谱感知数据构建的数据集进行反向传播(BP)神经网络训练,预测某一频点的占用长度。通过计算BP神经网络与传统的长短期记忆(LSTM)神经网络预测法的均方根误差(RMSE),得到LSTM神经网络的RMSE为2.208 1,BP神经网络的RMSE为0.172 8。评估结果表明,BP神经网络准确度高。     

气相生长氮化铝单晶的新方法

通过在钨坩埚盖开小孔的方法改变氮化铝结晶衬底上的温度场分布,在开孔处形成局部低温区;由于孔的几何尺寸的限制和氮化铝晶体生长的各向异性,开孔处的氮化铝晶体单晶化;随后,开孔处的单晶起籽晶的作用,逐渐长成较大尺寸、较高质量的氮化铝单晶.目前用该方法已经制备出直径大于2mm的氮化铝单晶体.     

退火温度对6H-SiC衬底上ZnO薄膜发光性质的影响

采用溶胶-凝胶方法,在6H-SiC衬底上制备ZnO薄膜.X射线衍射结果表明薄膜是c轴取向的,具有六方纤锌矿多晶结构.研究了退火温度对ZnO薄膜发光特性的影响.发现在650℃退火温度下,观察到近带边紫外发射和可见光发射并且紫外发光强度大于可见光发射.随着退火温度的提高,紫外峰强度减弱直至消失,而绿光发射强度先增加而后降低.对退火温度引起ZnO薄膜发光性质改变的机制进行了探讨.     

Cloning, Expression and Purification of Wheat Acetyl-CoA Carboxylases CT Domain in E.coil

The entire gene of carboxyltransferase(CT) domain of acetyl-CoA carboxylase(ACCase) from Chinese Spring wheat(CSW) plastid was cloned firstly,and the 2.3 kb gene was inserted into PET28a+ vector and expressed in E.coil in a soluble state.The (His)6 fusion protein was identified by SDS-PAGE and Western blot.The recombinant protein was purified by affinity chromatography,and the calculated molecular mass(Mr) was 88000.The results of the sequence analysis indicate that the cloned gene(GeneBank accession No.EU124675) was a supplement and revision of the reported ACCase CT partial cDNA from Chinese Spring wheat plastid.The recombinant protein will be significant for us to investigate the recognizing mechanism between ACCase and herbicides,and further to screen new herbicides.     

Improved Stretchable and Sensitive Fe Nanowire-Based Strain Sensor by Optimizing Areal Density of Nanowire Network

Flexible strain sensors, when considering high sensitivity and a large strain range, have become a key requirement for current robotic applications. However, it is still a thorny issue to take both factors into consideration at the same time. Here, we report a sandwich-structured strain sensor based on Fe nanowires (Fe NWs) that has a high GF (37–53) while taking into account a large strain range (15–57.5%), low hysteresis (2.45%), stability, and low cost with an areal density of Fe NWs of 4.4 mg/cm². Additionally, the relationship between the contact point of the conductive network, the output resistance, and the areal density of the sensing unit is analyzed. Microscopically, the contact points of the conductive network directly affect the sensor output resistance distribution, thereby affecting the gauge factor (GF) of the sensor. Macroscopically, the areal density and the output resistivity of the strain sensor have the opposite percolation theory, which affects its linearity performance. At the same time, there is a positive correlation between the areal density and the contact point: when the stretching amount is constant, it theoretically shows that the areal density affects the GF. When the areal density reaches this percolation threshold range, the sensing performance is the best. This will lay the foundation for rapid applications in wearable robots.     

聚合物气体辅助注射成型制品的形态结构

作为一种由常规注射成型发展起来的聚合物加工技术,气体辅助注射成型具有节约原材料、缩短成型周期以及提高制品性能等优点,已得到广泛的应用.由于气辅成型过程是一个在刚、柔双重约束界面条件下进行的多相复杂体系的多次流动过程,因而其形态结构的形成、发展和演化要远比常规注塑成型复杂.然而在气辅成型的形态结构方面,国内外的研究一直以来开展得较少.近年来,作者在聚合物及其共混物、复合材料气辅成型制品的形态结构方面已开展了广泛的研究工作,本文对这些工作和一些重要结果作了总结,并简要分析了成型过程中剪切场对形态演化的影响,最后对该研究方向的发展趋势作了展望.     

在役老旧拱桥的极限承载力分析

在役老旧拱桥的承载力是人们关心的热点问题之一,某些桥梁随着使用年限的不断增加,拱肋以及其他结构部件变形甚至破坏,其承载能力削弱问题会变得尤为突出．以宁波市灵桥为例详细分析了其极限承载力,分析过程中考虑了材料和几何双重非线性,以及涉及到灵桥由于战争、船体碰撞、行车事故和其他意外事故引起的拱肋变形和扭曲情况．计算结果表明：拱肋面外的初始变形极大地削弱了灵桥的极限承载能力;要准确评估该桥的极限承载能力,必须考虑材料非线性和几何非线性的影响．     

坛紫菜对干出和酸雨胁迫的生理响应

以坛紫菜为试验材料,研究不同强度酸雨(pH值分别为5.6、4.5、4.0、3.5)对坛紫菜生理特性的影响.试验中测定了坛紫菜细胞膜透性、抗氧化酶活性及叶绿素荧光参数等生理指标,以比较适当干出和完全浸泡、黑暗和光照条件下酸雨胁迫对坛紫菜生理特性的影响.结果表明:(1)经过不同方式处理的模拟酸雨处理后,适当干出处理的坛紫菜...     

ZnO薄膜的研究进展

光泵浦紫外激光的获得使ＺｎＯ成为热门的新型光电材料,文章从ＺｎＯ的基本特性、光电特性、生长方法,用途和应用前景等方面综述了ＺｎＯ的最新研究及进展,并对ＺｎＯ今后的发展作了展望。