Synthesis of oxazole and furan derivatives via Rh2(OAc)4-catalyzed C≡X bond insertion of cyclic 2-diazo-1,3-diketones with nitriles and arylacetylenes

Abstract

A convenient and efficient procedure for the synthesis of 2-substituted-6,7-dihydrobenzo[d]oxazol-4(5H)-ones and 2-aryl-6,7-dihydrobenzofuran-4(5H)-ones through a Rh₂(OAc)₄-catalyzed C≡X (X?=?N, C) insertion of cyclic 2-diazo-1,3-diketones with nitriles and aromatic alkynes has been developed. This reaction uses readily available starting materials and stable cyclic 2-diazo-1,3-diketone compounds, with desired products formed in good to high yields. A tentative mechanism involving a C≡X bond insertion and 1,5-dipolar electrocyclization/ring opening and cyclization sequence for this reaction is proposed.     

Spectroscopic Investigation on Sonocatalytic Damage of BSA Molecules by FeIII Complexes with Binary Organic Acid Ligands Under Ultrasonic Irradiation

The interaction between bovine serum albumin (BSA) and Fe^III complexes with three binary organic acid (biorga) ligands, [Fe^III(oxa)(H₂O)₄]⁺ (oxa = oxalic acid), [Fe^III(pra)(H₂O)₄]⁺ (pra = propanedioic acid) and [Fe^III(sua)(H₂O)₄]⁺ (sua = succinic acid), as well as the sonocatalytic damage of BSA in the presence of these three Fe^III–biorga complexes under ultrasonic irradiation, were studied by UV–vis and fluorescence spectra. The experimental results show that the fluorescence quenching process of BSA caused by three Fe^III–biorga complexes are all static quenching and the corresponding quenching rate constants (K _q), equilibrium constants (K _A) and the binding site numbers (n) were calculated. The results reveal that, under ultrasonic irradiation, the BSA molecules were obviously damaged by these Fe^III–biorga complexes. In addition, the effects of several factors on the damage of BSA molecules were examined. The experimental results demonstrate that the damage degree of BSA increased with an increase of ultrasonic irradiation time, Fe^III–biorga complex concentration, and ionic strength. In comparison, [Fe^III(pra)(H₂O)₄]⁺ exhibited higher sonocatalytic activity than [Fe^III(oxa)(H₂O)₄]⁺ and [Fe^III(sua)(H₂O)₄]⁺. Finally, the extent of generation of $ \cdot {\text{O}}_{2}^{ - } $ · O 2 ? and ·OH during sonocatalytic processes was estimated. Perhaps, the results will be significant for promoting sonodynamic treatment (SDT) of tumors at the molecular level.     

Photochromic copolymers containing 3-indolylfulgides/indolylfulgimides: Synthesis and photochemical properties in toluene and as films

Photochromic indolylfulgimides covalently attached to polymers have beneficial properties for optical switching. A 3-indolylfulgide and two 3-indolylfulgimides with one or two polymerizable styrene groups attached on the nitrogen atom(s) were synthesized. Copolymerization with methyl methacrylate (MMA) provided linear copolymers (one styrene group) or a cross-linked copolymer (two styrene groups). The properties of the monomers and copolymers in toluene or as thin films were characterized. The new copolymers were photochromic (reversible Z-to-C isomerization), absorbed visible light, and revealed good thermal and photochemical stability. At room temperature, all copolymer films showed no loss of absorbance after 5 weeks. At 80 °C in either toluene or as films, the Z-forms copolymers were less stable than the C-form copolymers, which showed little or no degradation after 400 h. The degradation rate due to repeated ring-closing – ring opening cycles was less than 3% per 100 cycles. The cross-linked copolymer showed photochemical stability comparable to monomeric fulgides in toluene, <1% per 100 cycles. In general, the properties of the linear and cross-linked copolymers were similar to the corresponding monomers in toluene. In films, the conformations of the Z-form were restricted due to the matrix indicating that the preparation of films from the C-form is advantageous.     

A microfluidic chip‐based fluorescent biosensor for the sensitive and specific detection of label‐free single‐base mismatch via magnetic beads‐based “sandwich” hybridization strategy

A novel microfluidic chip‐based fluorescent DNA biosensor, which utilized the electrophoretic driving mode and magnetic beads‐based “sandwich” hybridization strategy, was developed for the sensitive and ultra‐specific detection of single‐base mismatch DNA in this study. In comparison with previous biosensors, the proposed DNA biosensor has much more robust resistibility to the complex matrix of real saliva and serum samples, shorter analysis time, and much higher discrimination ability for the detection of single‐base mismatch. These features, as well as its easiness of fabrication, operation convenience, stability, better reusability, and low cost, make it a promising alternative to the SNPs genotyping/detection in clinical diagnosis. By using the biosensor, we have successfully determined oral cancer‐related DNA in saliva and serum samples without sample labeling and any preseparation or dilution with a detection limit of 5.6 × 10^?11 M, a RSD (n = 5) < 5% and a discrimination factor of 3.58–4.54 for one‐base mismatch.     

Influence of Emulsifiers on Acrylate Latex Blends

The poly(methyl methacrylate/butyl acrylate/acrylic acid) [P(MMA/BA/AA)] and poly (styrene/butyl acrylate/acrylic acid) [P(St/BA/AA)] latexes were synthesized using the emulsifier octylphenol polyoxyethylene(10) ether (OP-10) and ammonium sulfate allyloxy nonylphenoxy poly(ethyleneoxy)(10) ether(DNS-86). The optimum amount of OP-10 and DNS-86 was 1.5% and 2.5% respectively. The P(MMA/BA/AA) and P(St/BA/AA) latex containing 1.5% OP-10 or 2.5% DNS-86 were blended pairwise. The performances of latex blends and parent latexes as a function of emulsifiers content in parent latexes were determined. The results indicated that the stability of latex blends is favorable, and particle size distribution was more uniform and thermal stability was improved after blending.     

Relationship Between the Polymer Structures and Destabilization of Polymer‐Containing Water‐in‐Oil Emulsions

The viscous properties, scanning electronic microscopy (SEM), and water/oil interfacial tension (IFT) of partially hydrolyzed polyacryamide (HPAM) and hydrophobically associating hydrolyzed polyacryamides modified with N‐dodecylacrylamide were studied with the objective of investigating the influence on destabilization of emulsions. As expected, the copolymers exhibit significant viscosity enhancing capacity and three‐dimensional network structures due to intermolecular hydrophobic associations, and also present high interfacial activities as the IFT decrease with increasing polymer concentration. As a result, the existences of copolymers increased both the viscosity of emulsions and the intensity of interfacial film, in which case slow down the diffusion of demulsifier molecules and enhance the stability of emulsions, finally, the separation of water from oil becomes more difficult.     

人类谷胱甘肽硫转移酶家族等位基因蛋白B与抑制剂作用模型的理论研究

采用分子动力学模拟方法系统地研究了谷胱甘肽硫转移酶家族(Glutathione S-transferases,GSTs)的等位基因蛋白B(GSTP1*B)与抑制剂利尿酸(EA)以及EA的谷胱甘肽(GSH)共轭物EAG(I),EAG(O)的具体结合方式.抑制剂及其谷胱甘肽共轭物与蛋白的相互作用能计算结果及分子动力学轨迹的统计分析结果表明,GSTP1*B与EA的谷胱甘肽共轭物的结合能力优于其与EA的结合能力,Phe8,Arg13,Trp38和Tyr108是作用过程中的关键残基,对稳定抑制剂及其谷胱甘肽共轭物在GSTP1*B的G和H位点的构象具有重要的作用.通过对构象的统计分析发现,残基Phe8和Tyr108与GSTP1*B酶对抑制剂的选择性密切相关.     

交联聚乙烯基吡咯烷酮快速前处理方法结合液相色谱-串联质谱分析红葡萄酒中酪蛋白过敏原

建立了红葡萄酒酪蛋白过敏原的质谱分析方法。选择专一性SRM离子对,建立3种亚型酪蛋白α-S1,α-S2,β的质谱定性与定量方法;利用交联聚乙烯基吡咯烷酮(PVPP)处理红葡萄酒有效提取蛋白,并直接快速酶解,使前处理缩短到2 h以内。结果表明,酪蛋白的回收率提高到80%以上,检出限达10μg/L。     

微波辅助中空纤维液相微萃取-液相色谱-串联质谱法同时快速测定牛奶中27种抗生素残留

采用微波辅助中空纤维液相微萃取的样品前处理方法,在一段中空纤维管内注入正辛醇-甲苯(1∶1,V/V)作为接受相,两端封口后浸入供相溶液进行萃取。在700 r/min连续磁力搅拌和间歇微波辐照下,12.67 min即可完成27种目标化合物同时萃取。建立了微波辅助中空纤维液相微萃取联用液相色谱-串联质谱同时测定牛奶中27种抗生素(9种喹诺酮、15种磺胺、3种大环内酯)痕量残留的方法。以基质标准曲线外标法定量,线性范围为0.2!5.0"g/kg,相关系数均大于0.99(n=3),定量限(LOQ,S/N=10)在0.036!0.568"g/kg范围内。以0.5、1.0和2.0"g/kg添加浓度水平进行方法验证,回收率为49.0%~115.0%,相对标准偏差为0.89%~21.1%。     

基于核酸分子杂交的免疫芯片抗体固定新方法

基于核酸分子杂交原理构建了一种新型抗体固定方法.先将抗体与寡核苷酸单链交联,再将两者的复合物与固相载体表面上的互补寡核苷酸链结合,从而将抗体固定到载体的表面.在磁珠表面对该固定方法进行实验,证明了方法的可行性.以本方法构建了针对转基因Bt Cry1Ac蛋白的免疫芯片,用Cy3标记二抗对其探针固定效果进行分析,并且在芯片上对Bt Cry1 Ac蛋白进行梯度浓度检测试验.结果表明,以本方法构建的抗体芯片,探针分布具有良好的特异性;探针层分布均匀,非特异吸附小;检测灵敏度达到0.01 ～ 0.05 μg/L;此外,通过杂交核酸双链的解离成功实现了芯片的再生,有助于解决传统抗体固定方法中芯片不可再生的问题.