NaCl枝状形貌的制备及生长机理探讨

采用溶剂蒸发法,在不同的条件下分别获得了具有四次对称和二次对称的Na Cl枝晶、"Z"字形枝蔓晶以及主要由枝晶呈放射状分布的球粒晶。借助于X射线衍射仪、光学显微镜、扫描电镜以及电子背散射衍射仪(EBSD),对Na Cl枝状形貌进行了测试分析。结果表明,Na Cl球粒晶主要由主干沿着<111>方向生长的一系列枝晶组成。Na Cl晶体(111)面网由同号离子组成,且钠离子层与氯离子层相间分布,层与层之间的联结力强,且(111)的面网间距最小,是导致Na Cl枝晶优先沿<111>方向生长的主要原因。溶剂的蒸发速度等环境因素的变化对Na Cl枝状形貌的形成具有很大的影响。     

过渡层（SiO2,TiO2）对F掺杂SnO2薄膜的光电性能影响研究

采用喷雾热解法分别在普通钠钙玻璃、含Si O2过渡层与Ti O2过渡层的玻璃上制备了F掺杂Sn O2薄膜,比较了不同过渡层上生长的F掺杂Sn O2薄膜的表面形貌特点,分析了过渡层对F掺杂Sn O2膜层的光电性能的影响。结果表明,过渡层种类对F掺杂Sn O2薄膜各项性能影响很大,在Si O2薄膜过渡层上制备的F掺杂Sn O2薄膜晶粒最小且表面致密,在Ti O2过渡层制备的F掺杂Sn O2薄膜晶粒最大,在玻璃上生长的F掺杂Sn O2薄膜较为疏松,以Si O2为过渡层制备的F掺杂Sn O2薄膜光电性能最佳,其平均可见光透过率为82.9%,电阻率为5.33×10-4Ω·cm,适合喷雾热解法制备性能优良的玻璃基F掺杂Sn O2薄膜。     

MODELLING OF WAVE PROPAGATION IN THE NEARSHORE REGION USING THE MILD SLOPE EQUATION WITH GMRES-BASED ITERATIVE SOLVERS

The mild slope equation in its linear and non-linear forms is used for the modelling of nearshore wave propagation. The finite difference method is used to descretize the governing elliptic equations and the resulting system of equations is solved using GMRES-based iterative method. The original GMRES solution technique of Saad and Schultz is not directly applicable to the present case owing to the complex coefficient matrix. The simpler GMRES algorithm of Walker and Zhou is used as the core solver, making the upper Hessenberg factorization unneccessary when solving the least squares problem. Several preconditioning-based acceleration strategies are tested and the results show that the GMRES-based iteration scheme performs very well and leads to monotonic convergence for all the test-cases considered.     

A literature review on the in situ generation of reinforcing fibers

Liquid crystal polymers (LCPs) are a relatively new class of materials. These polymers usually consist of rigid rodlike molecular chains and they are capable of forming highly oriented structures even in the as-made product, with strength/modulus significantly higher than those of the conventional flexible chain polymers. Blending of LCPs with conventional polymers produces composite-like structures with LCPs serving as the reinforcing component. The properties of the blends are affected by the size, shape and distribution of the LCPs in the matrix polymer, which in turn are related to the processing conditions such as the blend composition, the extrusion and drawing conditions, the viscosity ratio of the component polymers and the type and grade of the LCPs and the matrix polymers. Improved processability of the blend due to the reduction in viscosity and the improved interfacial adhesion between reinforcing fibers and the matrix polymer are among the advantages of these materials over the conventional short fiber reinforced composites. This paper gives a brief review of the work currently available in the literature on rheology, fabrication, blend morphology and mechanical/thermal properties of the in situ composites from blends of LCPs and conventional polymers.     

Electrochromism and photoelectrochemical perfor- mance of WO3/Au composite film electrodes

WO₃/Au composite film electrode was prepared by hydrothermal combined electrodeposition method. The samples were characterized by scanning electron microscope(SEM), energy dispersive spectrometer(EDS) and X-ray diffraction(XRD), and the results showed that WO₃/Au composite film was synthesized. Electrochemical and spectral measurements were carried out to obtain the electrochromic response time, reversibility, coloration efficiency(CE) and transmittance of the WO₃     

优化端点条件的平面二次均匀B样条插值曲线

在利用反求法构造B样条插值曲线时,往往需要选取端点条件。 因此,可对端点条件进行优化选取,使得构造的B样条插值曲线满足特定要求。提出了一种利用曲线内能极小选取平面二次均匀B样条插值曲线端点条件的算法。首先给出了二次均匀B样条插值曲线分控制顶点与首个控制顶点（即端点条件）的递推关系式;然后给出了利用曲线内能极小优化选取首个控制顶点的算法,证明了利用该算法构造的C¹连续二次均匀B样条插值曲线为保形插值,并通过数值算例证明了算法的有效性;最后,为便于实际应用,基于MATLAB平台设计了算法所对应的图形用户界面,用户通过简单的操作即可获得光顺的C¹连续二次均匀B样条保形插值曲线。     

基于改进降噪自编码器的馈线终端失效率预测

配电网中馈线终端设备由于运行环境恶劣,往往面临意外失效问题。本文针对海量馈线终端装置的失效率预测问题,使用堆叠降噪自编码器实现基于馈线终端的各个关键元件的失效率预测;采用基于Dropout的模型正则化方法防止自编码器训练过程中出现过拟合现象,同时采用Adadelta算法对堆叠自编码器进行优化,在保证预测准确率的同时提高学习速率,实现馈线终端故障失效率的高效准确预测;最后基于馈线终端装置现场数据进行仿真验证。仿真结果验证了本文方法对失效率预测的准确性和泛化能力。     

密堆积与中学化学中的晶体结构

联系新课程和化学奥赛的有关内容简要论述了晶体结构的密堆积;分析了密堆积在中学化学晶体结构学习中的地位和作用;举例说明了密堆积对于深刻理解晶体结构的内容和在解决晶体结构问题中的应用。     

航路规划中数字地图单元格代价计算模型研究

为了解决航路规划中使用的原始数字地图信息量不够全面的问题,结合反舰导弹航路规划的实际作战背景,建立了数字地图单元格代价计算的数学模型.该模型包含了地形高程代价、威胁危险代价、战略回避代价和搜索区目标存在代价等基本模型.通过该模型可以将原始数字地图转化为包含各种相关航路规划主客观信息的综合数字地图.     

光催化材料反应系数测量新方法

本文提出光催化材料反应系数测量新方法-Mass transfer based(MTB)方法,该方法不同于传统方法中忽略传质影响,而是通过CFD计算考虑传质影响,这种改进无需传统方法所需反应控制过程也可准确测量光催化材料反应系数。利用该方法测量了光催化材料降解甲醛的反应系数,实验验证了其可行性。