激光激发水中产生超声波的实验研究

采用压电陶瓷水听器研究了Nd：YAG脉冲激光激发水中产生瞬态超声波的特性,给出了声压信号随距离的变化关系。研究结果表明：用激光产生水下声波是完全可行的。当观测点与光击穿区的距离r远大于柱体长度时,垂直于光传播方向的激光瞬态超声波幅值与r成反比;当观测点与光击穿区的距离r很小时,垂直于光传播方向的声压幅值与产成反比。此外,当激光入射角度发生变化,超声脉冲的幅值也随之发生变化,其幅值在激光束垂直入射的时候最大。     

Environmental Impacts on Spiking Properties in Hodgkin-Huxley Neuron with Direct Current Stimulus

Based on the well accepted Hodgkin-Huxley neuron model, the neuronal intrinsic excitability is studied when the neuron is subject to varying environmental temperatures, the typical impact for its regulating ways. With computer simulation, it is found that altering environmental temperature can improve or inhibit the neuronal intrinsic excitability so as to influence the neuronal spiking properties. The impacts from environmental factors can be understood that,the neuronal spiking threshold is essentially influenced by the fluctuations in the environment. With the environmental temperature varying, burst spiking is realized for the neuronal membrane voltage because of the environment-dependent spiking threshold. This burst induced by changes in spiking threshold is different from that excited by input currents or other stimulus.     

三网融合模式下全链路双备份路由

在三网融合模式下,利用全链路双备份路由方式,让用户体验到全年几乎零故障率的网络服务质量,并使得运行维护方面可以有充分的时间做出更合理、更优质的网络。介绍全链路双备份路由的具体构成。     

LAMOST天体光谱巡天

文章着重介绍了中国自主创新的LAMOST望远镜以及所取得的光谱巡天成果。LAMOST是一种新型的反射施密特望远镜,它突破了大规模光谱巡天所需要的大视场兼备大口径望远镜的技术瓶颈,成为世界上天体光谱获取率最高的望远镜。自2011年10月到2014年6月,LAMOST获得了413万条天体光谱,其中有378万条恒星光谱和包括220万条恒星光谱的参数星表。     

空心结构NaYF4∶Yb,Er上转换材料的制备

以稀土三氟乙酸盐、氟化钠和三氟乙酸钠为原料通过溶剂热法成功制备出了空心结构的Na YF4∶Yb,Er上转换材料,探索了反应温度、钠离子浓度对产物形貌、晶相及发光性能的影响。利用扫描电镜,透射电镜,X射线衍射和发光光谱对产物的形貌、物相结构及荧光性能进行表征。结果表明,当Na F和Y3+的摩尔比为2.5,220℃溶剂热反应12 h时,可得到空心结构的上转换材料,该结构兼具上转换荧光、载药双重功能。     

NaCl枝状形貌的制备及生长机理探讨

采用溶剂蒸发法,在不同的条件下分别获得了具有四次对称和二次对称的Na Cl枝晶、"Z"字形枝蔓晶以及主要由枝晶呈放射状分布的球粒晶。借助于X射线衍射仪、光学显微镜、扫描电镜以及电子背散射衍射仪(EBSD),对Na Cl枝状形貌进行了测试分析。结果表明,Na Cl球粒晶主要由主干沿着<111>方向生长的一系列枝晶组成。Na Cl晶体(111)面网由同号离子组成,且钠离子层与氯离子层相间分布,层与层之间的联结力强,且(111)的面网间距最小,是导致Na Cl枝晶优先沿<111>方向生长的主要原因。溶剂的蒸发速度等环境因素的变化对Na Cl枝状形貌的形成具有很大的影响。     

过渡层（SiO2,TiO2）对F掺杂SnO2薄膜的光电性能影响研究

采用喷雾热解法分别在普通钠钙玻璃、含Si O2过渡层与Ti O2过渡层的玻璃上制备了F掺杂Sn O2薄膜,比较了不同过渡层上生长的F掺杂Sn O2薄膜的表面形貌特点,分析了过渡层对F掺杂Sn O2膜层的光电性能的影响。结果表明,过渡层种类对F掺杂Sn O2薄膜各项性能影响很大,在Si O2薄膜过渡层上制备的F掺杂Sn O2薄膜晶粒最小且表面致密,在Ti O2过渡层制备的F掺杂Sn O2薄膜晶粒最大,在玻璃上生长的F掺杂Sn O2薄膜较为疏松,以Si O2为过渡层制备的F掺杂Sn O2薄膜光电性能最佳,其平均可见光透过率为82.9%,电阻率为5.33×10-4Ω·cm,适合喷雾热解法制备性能优良的玻璃基F掺杂Sn O2薄膜。     

MODELLING OF WAVE PROPAGATION IN THE NEARSHORE REGION USING THE MILD SLOPE EQUATION WITH GMRES-BASED ITERATIVE SOLVERS

The mild slope equation in its linear and non-linear forms is used for the modelling of nearshore wave propagation. The finite difference method is used to descretize the governing elliptic equations and the resulting system of equations is solved using GMRES-based iterative method. The original GMRES solution technique of Saad and Schultz is not directly applicable to the present case owing to the complex coefficient matrix. The simpler GMRES algorithm of Walker and Zhou is used as the core solver, making the upper Hessenberg factorization unneccessary when solving the least squares problem. Several preconditioning-based acceleration strategies are tested and the results show that the GMRES-based iteration scheme performs very well and leads to monotonic convergence for all the test-cases considered.     

Electrochromism and photoelectrochemical perfor- mance of WO3/Au composite film electrodes

WO₃/Au composite film electrode was prepared by hydrothermal combined electrodeposition method. The samples were characterized by scanning electron microscope(SEM), energy dispersive spectrometer(EDS) and X-ray diffraction(XRD), and the results showed that WO₃/Au composite film was synthesized. Electrochemical and spectral measurements were carried out to obtain the electrochromic response time, reversibility, coloration efficiency(CE) and transmittance of the WO₃     

优化端点条件的平面二次均匀B样条插值曲线

在利用反求法构造B样条插值曲线时,往往需要选取端点条件。 因此,可对端点条件进行优化选取,使得构造的B样条插值曲线满足特定要求。提出了一种利用曲线内能极小选取平面二次均匀B样条插值曲线端点条件的算法。首先给出了二次均匀B样条插值曲线分控制顶点与首个控制顶点（即端点条件）的递推关系式;然后给出了利用曲线内能极小优化选取首个控制顶点的算法,证明了利用该算法构造的C¹连续二次均匀B样条插值曲线为保形插值,并通过数值算例证明了算法的有效性;最后,为便于实际应用,基于MATLAB平台设计了算法所对应的图形用户界面,用户通过简单的操作即可获得光顺的C¹连续二次均匀B样条保形插值曲线。