Research on wind turbine blade damage based on pre-stressed FBG strain sensors

One of the essential parts of a wind power generator that captures wind energy is the wind turbine blade. The safety of the blades rapidly declines as a wind turbine''s operating period grows. For real-time monitoring, a chip-type pre-stressed fiber Bragg grating (FBG) strain sensor was fabricated. The sensor''s structure was improved using simulation analysis along with optimization. It was discovered through calibration trials that the pre-stressing method expanded the sensor''s range of measurement, guaranteed overall linearity, and prevented the potential hysteresis phenomena during compression. The sensor''s final sensitivity was calculated to be 1.970 pm/με, and its linear fitting coefficient was 0.999. Finally, the sensor was used to monitor the wind turbine blades and the strain change curve of the root of a normally functioning blade is found to be a sine curve, which provides a certain reference value for judging whether the blade is damaged in the future.     

Dual-band reflective polarization converter based on metasurface

In this paper, a dual-band and reflective polarization converter based on metasurface is proposed. Its unit cell is composed of two layers of metal plates separated by a dielectric substrate. The simulation results show that the proposed converter is able to convert x- or y-polarized incident waves into cross-polarized waves perfectly in frequency bands of 6.75—10.59 GHz and 17.78—19.61 GHz, and the polarization conversion ratio (PCR) is nearly 100%, which can also convert linearly polarized waves into circularly polarized waves at four frequencies. It can be widely used in applications of radar satellites, antenna design and telecommunication with the function of realizing polarization conversion in two bands and achieving high PCR simultaneously.     

嵌入式电子助力转向系统研究

电子转向助力技术能够有效驱动汽车转向,为提高其转向控制的稳定性和准确性,本文设计了一种基于嵌入式的电子助力转向系统。首先针对传统的电子助力转向系统,利用牛顿第二定律建立其动力学模型,为控制器设计及构建硬件环境奠定基础。其次,针对典型电子转向助力系统的动力学模型,为降低其运动副间的摩擦对控制性能的影响,设计了自适应摩擦前馈补偿控制器,并根据Lyapunov稳定性原则确定了自适应控制率解析表达式。再次,本文以STM32F407嵌入式控制器为核心,搭建系统硬件平台并设计软件流程。最后,基于此平台展开试验验证,系统通过跟踪阶跃指令和正弦指令对比分析了传统PID算法和自适应摩擦前馈补偿算法,试验结果表明自适应前馈补偿算法可提高系统稳态精度和动态响应能力,并验证所设计的基于嵌入式的电子助力转向系统的正确性和完整性。     

Friendly spectrum jamming against MIMO eavesdropping

Wireless Networks - Friendly spectrum jamming is a flexible scheme to establish secure communications among heterogeneous wireless devices without the need of encryption. Previous works have...     

Reaction-diffusion model for combustion with fuel consumption: II. Robin boundary conditions

A model, derived in a previous paper, for the reaction betweena gaseous oxidant and a solid porous fuel is analysed furtherfor general Robin boundary conditions. Numerical solutions areobtained and the effects of varying the dimensionless parameters,particularly the Frank-Kamenetskii parameter and the Lewisnumber L, are discussed in detail and compared with resultsobtained previously when Dirichlet boundary conditions are applied.Analytic solutions are obtained for the small-time developmentand for large values of . This latter solution shows the existenceof a propagating reaction-diffusion burning wave, and has featureswhich are qualitatively different to those derived earlier.     

A New Chemiluminescence Amplification Reaction for the Determination of HRP and Labelled HRP

A new chemiluminescence amplification reaction has been developed, which is on the coupling of the oxidation of Eosin by hydrogen peroxide under the catalysis of HRP at pH 3. 5 to the chemiluminescent reaction of luminol and hydrogen peroxide catalyzed by HRP at pH 10 to measure the activity of HRP and labelled-HRP. The detection limit of HRP is 10-10 g/mL. The lowest dilution ratio of HBsAb-HRP is 1 : 1. 8×102 and 1 : 106 for the direct method and coupled method respectively.     

N,N-二甲基甲酰胺中电沉积制备镁镍储氢合金

采用恒电位沉积法, 选用适宜的添加剂和络合剂, 成功地从N,N-二甲基甲酰胺(DMF)中沉积出致密的黑色Mg-Ni储氢合金膜. 并初步探讨了其共沉积机理. XRD显示沉积层中含有非晶态Mg-Ni相和微晶态Mg相. SEM图及相应能谱图分析表明合金颗粒以团聚状态存在, 合金成分不是很均匀. AAS分析表明沉积合金中Mg的原子摩尔分数达27.3%. LAND电池测试系统测得所镀合金膜的放电比容量最高为172.4 mAh/g.