SYNTHESIS OF LIQUID CRYSTALLINE POLYACRYLATES WITH THIOESTER AS BRIDGE-BOND

A new series of acrylates with the same mesogens containing thioester as bridge-bondwere synthesized, and the acrylates were characterized by H~1 NMR, IR and MS. Thepolymers were obtained by radical polymerization using AIBN as initiator. The monomersand polymers exhibit thermotropic-enantiotropic liquid crystalline behavior.     

高介电常数TiO2纳米晶的表面态研究

将钛酸四丁酯和硬脂酸在熔融状态下混合均匀后置于冷水浴中,使其凝固成凝胶,通过控制烧结过程中氧气的含量,成功地制备出粒度均匀、介电性能好的纳米晶TiO2.通过采用X射线光电子能谱和表面光电压谱对纳米晶TiO2表面状态的分析发现,材料表面存在大量的氧空位缺陷,暴露在粒子表面上的主要是一些金属Ti4+.纳米材料的这种表面状态对其极化性质具有重要的影响,使其在接近静态条件下的低频介电常数远大于常规材料的介电常数.     

五硼酸钾部分高温特性的研究

研究了高温下水蒸汽及氯化钠或氯化钾对五硼酸钾的影响。借助自行设计的反应器与XRD、Raman光谱分析高温水蒸汽气氛下五硼酸钾的结构变化，证明了无论在其熔融态还是固态都会与水蒸汽发生反应，使产物中的K₂O含量升高，B₂O₃与水结合从五硼酸钾中脱离。利用DTA、XRD分析绘制了KB₅O₈-MCl（M＝K、Na）体系熔度图，属简单低共熔型，低共熔点分别为x_KCl=50%、 742 ℃，x_NaCl=20%、 689 ℃。     

新型聚丙烯酸酯类柴油降凝剂分子模型的建立及验证

在前期工作得出的正构烷烃含量与浊点、冷滤点、凝点的定量关系模型基础上，选择柴油降凝剂的基团对柴油降凝剂分子结构进行了设计，得出了设计模型。结果表明，将含氮基团引入柴油降凝剂可以显著提高柴油降凝剂的性能。根据设计模型合成了一系列聚丙烯酸单酯和混合酯柴油降凝剂，并通过对柴油降凝剂的性能测试结果和自行设计的计算程序对设计模型进行了验证，结果表明，从柴油正构烷烃含量对柴油降凝剂的配比进行设计是可行的。     

活性氧检测荧光探针的设计、合成及应用研究进展

首先介绍了生物体氧化还原状态的动态平衡机理以及生物体氧化应激的产生原因及影响,然后总结、概括了目前流行的荧光分析法—荧光探针的设计构成及识别机理,并详细介绍了近几年各类活性氧自由基检测荧光探针的研究进展,为活性氧检测荧光探针的进一步发展提供了新思路。     

对苯二甲酸二甲酯(DMT)与乙二醇(EG)的酯交换反应模拟动力学

Based on the method of ε-NTU, a mathematical modeling of ester-interchange reaction for dimethyl terephthalate (DMT) with ethylene glycol (EG) by acetate system was simulated, and, in addition, the corresponding kinetic equation is obtained by using the theoretical method of simulation. That is,-(dc)/(dt)=kc(c+k')where:-(dc)/(dt)= the reaction rate of the monomer, C -concentration of the monomer, θ-Suitable parameterk,k'-constant (k'=θ/k)The experimental results have showed that the ester-interchange reaction is a reaction neither first order or second order nor third order,but it is a reaction of secondary linear type. Yamanis^[2] doubted the correctness of the method that has been proved.Moreover,we have suggested the physical meaning of parameters.     

一种新型侧链液晶聚合物的喇曼光谱研究

The Raman scattering on a novel liquid crystal side chain polymer, poly-2,5-bis (p-meth-oxybenzoyloxy) styrene, has been performed. We observed that the characteristic Raman sp-ctra of the vinyl group in the monomer changed much deeply in the polymer, especially for the Raman line correponding to the C=C of the vinyl group which disappeared completly in the polymer. Contrast with that, the Raman spetra of the rest group did not present any substantial difference between the monomer and the polymer. These experimental facts show-ed that the vinyl group of the monomer was tranfered to the polymeric backbone while the chemical structure of the mesogenic unit in the monomer remained after the polymerization,and also conformed that it was successful in the synthesis of a liquid crystal side chain plymer without a flexible spacer between the mesomorphic unit and the molecular main chain.     

热定型聚酯纤维内应力与晶格变形的关系

<正> 结晶学家认为低分子物结晶虽可能存在一定缺陷和变形,但一般都具有一定的晶胞参数。这一概念对于高分子物结晶已不再正确。Bosley认为成形、热处理、冷却速率和杂质的存在皆可引起晶格变形;Fakirov故意在PET中加入少量杂质,却未引起变形。至今,PET已累积了7组晶胞参数,8个计算所得的晶区密度显示了较大幅度的波动(见     

水相湿法改性纳米碳酸钙表面性质的研究

用特定的表面改性剂在水相中对纳米碳酸钙的悬浮液进行了湿法改性。红外光谱和热失重分析证明,改性剂与碳酸钙之间以化学键结合;沉降体积和接触角的测定结果说明改性粒子在液体石蜡中的润湿性和疏水性得到了提高;透射电子显微镜照片显示改性粒子在液体石蜡中有更好的分散性;体系粘度实验表明改性粒子与液体石蜡之间有较好的相容性。     

固相微萃取/GC直接测定废水中的三种氯酚

研究了运用固相微萃取／GC直接测定水中的三种氯酚的方法，得到了分析三种氯酚的SPMF最佳萃取条件。选取聚丙烯酸酯（PA）萃取头，水溶液调pH=2,并用NaCl饱和，室温下在持续磁力搅拌下直接萃取40min，纤维萃取头在260℃脱附5min。所建立的方法适于快速、方便地测定水中三相氯酚，无须浓缩和预处理。