用13CNMR研究聚甲基丙烯酸锡酯的立构序列分布

本文测定了自由基型溶液聚合的聚甲基丙烯酸三甲基锡酯(PTMTM),聚甲基丙烯酸三乙基锡酯(PTETM)和聚甲基丙烯酸三丁基锡酯(PTBTM)的¹³C-NMR谱,对其C-2谱扩展分峰,计算立构序列,从定量数据表明,聚合物样品的空间立构富于或稍富于间规立构,随取代基的体积增大而趋于无规分布,作者认为受空间位阻效应和分子内或分子间形成配位键的影响。     

E*-酉范畴逆半群的结构

本文通过定义本原逆半群在集合上的部分作用及其整体化,给出了E*-酉范畴逆半群的结构．     

闪烁体荧光传输特性对ETOF探测器性能的影响

为了对BESⅢ端盖飞行时间探测器(ETOF)的测试结果给出合理的解释, 采用Monte Carlo模拟软件包Geant4, 对该探测器测量高能带电粒子的性能进行模拟研究. 详细探讨了当粒子击中ETOF模块不同位置时, 其闪烁体荧光传输特性与探测器模块输出信号之间的关联, 以及PMT输出信号甄别阈值的选取对闪烁探测器本征时间分辨的影响, 并寻找可能的改善时间分辨的方法. 为进一步提高ETOF的性能提供参考.     

An Economical Magnetocardiogram System Based on High-To SQUIDs

An economical magnetocardiogram （MCG） system is built in our laboratory. It mainly consists of a MCG data acquisition stage equipped with two high-To superconducting quantum interference device （SQUID） magnetometers, a data processing stage with digital filtering and a one-layer μ-metal magnetically shielded room in conjunction with a high-Tc SQUID based active compensation. Experimental results show that a noise level of pico-tesla in MCG profiles, which is necessary for clinical applications, may be achieved with the system. Moreover, stable and convenient operations of the system are demonstrated with simulating MCG measurements.     

用离子束混合及快速热处理方法形成钽的硅化物

本文描述用离子束透过钽金属膜进行混合和快速热处理方法来形成钽的硅化物.用溅射方法在P型硅衬底上淀积一层金属钽,然后用砷离子束透过钽金属模进行混合,采用快速热处理后形成了平整的硅化钽薄层.使用厚度为500埃的钽金属膜,得到钽的硅化物薄层电阻为5.5Ω/□.研究了砷离子能量、剂量及钽膜厚度对钽的硅化物薄层电阻的影响.用透射电镜和台阶仪对所形成的硅化钽进行了分析和厚度测量.     

Pregelation Behaviour of Coagulation Processes with the Constant-Reaction-Number Kernel

We propose an irreversible binary coagulation model with a constant-reaction-number kernel, in which, among all the possible binary coagulation reactions, only p reactions are permitted to take place at every time. By means of the generalized rate equation we investigate the kinetic behaviour of the system with the reaction rate kernel K（i;j） = （ij）^w （0 ≤w〈1/2）, at which an i-mer and a j-mer coagulate together to form a large one. It is found that for such a system there always exists a gelation transition at a finte time to, which is in contrast to the ordinary binary coagulation with the same rate kernel. Moreover, the pre-gelation behaviour of the cluster size distribution near the gelation point falls in a scaling regime and the typical cluster size grows as （to - t）-1/（1-2w）. On the other hand, our model can also provide some predictions for the evolution of the cluster distribution in multicomponent complex networks.     

Electroluminescence of a Multi-Layered Organic Light-Emitting Diode Utilizing Trans-4-[p-[N-methyl-N-(hydroxymethyl)amino]styryl]-N-Methylphridinium Tetraphenylborate as the Active Layer

Employing an organic dye salt of trans-4-[p-[N-methyl-N-(hydroxymethyl)amino]styryl]-N-methylphridinium tetra\-phenylborate (ASPT) as the active layer, 8-hydrocyquinoline aluminium (Alq₃) as the electron transporting layer and N,N’-diphenyl-N,N’-bis(3-methylphenyl)-[1,1’-biphenyl]-4,4’-diamine (TPD) as the hole transporting layer, respectively, we fabricate a multi-layered organic light-emitting diode and observe the colour tunable electroluminescence (EL). The dependence of the EL spectra on the applied voltage is investigated in detail, and the recombination mechanism is discussed by considering the variation of the hole-electron recombination region.     

Double-Humped Transverse Density Profile in Two-Dimensional Chute Flow with Rough Sidewalls

We study a two-dimensional granular rapid flow with rough sidewalls stuck with the same size discs by molecular dynamics simulation. A transient state of the double-humped density profile in the flowing process has been found, which appears and moves as travelling wave and is the same as the phenomena in the recent experiments [Acta Phys. Sin. 53 （2004） 3389 （in Chinese）]. Our simulation shows that the rough sidewalls play an important role in the converting momentum of boundary discs from the vertical direction to the horizontal one through particle collisions to form this profile and the good elasticity of discs ensures this effect. The appearance of the double-humped profile may be a precursor, which determines if the whole flow will be far repulsed from the boundary and become dilute eventually.     

高性能IGBT模块的设计考虑

本文对ＩＧＢＴ模块中功率芯片（ＩＧＢＴ和续流二极管）的优化设计进行了讨论。通过优化几个重要的工艺参数并改进器件的结构，ＩＧＢＴ不仅有足够的短路容量，而且正向压降与电流下降时间之间可实现最佳折衷。另外，续流二极管的反向恢复特性也有明显改善。通过采用衬底控制技术，ＩＧＢＴ模块的输出特性不受温度的影响，输出电流更稳，输出阻抗更高。本文详细介绍了整个设计考虑。     

Use of the Apparent Content Curves for the spectrophotometric identification of substances: identification of amphetamines

The possibility of identification of substances which have similar spectral behaviour by means of Apparent Content Curves has been studied. This study is carried out with absorption, excitation and emission spectra of several amphetamines of widespread pharmaceutical use. Results obtained show that amphetamine, phenylpropanolamine, pseudoephedrine, phenylephrine, epinephrine, dopamine and methoxyamphetamine can be identified with a probability of >95%.