Numerical research on mid-infrared supercontinuum generation in Ge11.5As24Se64.5 few-mode photonic crystal fibers

Based on the nonlinear and mode coupling effect in few-mode photonic crystal fiber (FM-PCF), an approach for supercontinuum (SC) generation in the mid-infrared (MIR) region is proposed. The propagation characteristics of Ge11.5As24Se64.5 FM-PCF have been analyzed and optimized by the full-vector finite element method. The two-mode generalized nonlinear Schrodinger equation (TM-GNLSE) is set up, and the SC generation has been analyzed by the split-step Fourier method. The SC from 1.80 μm to 11.32 μm is generated by pumping 3.0-cm-long fiber at the central wavelength of 3.0 μm, the peak power of 120 W, and the pulse duration of 250 fs.     

Polymer passivation of defects in inorganic perovskite solar cells

Inorganic perovskite solar cells (IPSCs) have attained attention due to their excellent thermal and phase stability. In this work, we demonstrate a novel approach for fabricating IPSCs, using the strategies of interface passivation and anti-solvent before spin-coating perovskite. Poly(methyl methacrylate) (PMMA) and chlorobenzene (CB) are used as passivator and anti-solvent, respectively. The CB improves the perovskite crystal morphology. Meanwhile, PMMA passivates the defects between poly(3, 4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) and perovskite layer, thus increasing the short-circuit current. Excitingly, we find that PMMA benefits the grain boundaries (GBs) of perovskite, which makes it more humidity-resistant, increasing the stability of perovskite film. Especially, PMMA mitigates interfacial charge losses, and the devices based on CsPbI3-xBrx passivated by PMMA exhibit the power conversion efficiency (PCE) much higher than those based on pure CsPbI3-xBrx.     

Dark spatial solitons sequence in the biased centrosymmetric photorefractive crystal

We theoretically investigate the evolution of dark screening spatial solitons originating from the quadratic electro-optic effect in biased centrosymmetric photorefractive (CP) crystal by using beam propagation method (BPM). The results indicate that the multiple dark solitons sequence can be obtained in the CP crystal with the odd or even initial conditions. If the initial width of the dark notch is smaller, only a fundamental soliton or a Y-junction soliton pair is generated. When the initial width of the dark notch and the bias electric field are increased, the multiple dark spatial solitons sequence is formed, which realized a progressive transition from a low-order soliton to a higher-order solitons sequence in both odd and even conditions. The solitons characteristic is similar to that of screening solitons in the non-centrosymmetric photorefractive (NCP) crystals.     

封装器件多应力叠加失效仿真分析与验证

针对某双列直插式(DIP)封装器件在整机温循试验中出现的失效现象,分析在器件与电路板焊接环节、电路板与整机装配环节和整机温循试验环节3个工况下可能的失效原因,对原因分别进行单工况和多工况的失效仿真分析。针对不同仿真模型在不同工况下的叠加仿真难题,提出基于ANSYS Workbench有限元软件的多应力叠加仿真方法,对比单一工况和多种工况下的仿真结果。结果表明,DIP封装器件失效是器件在焊接尺寸不匹配、过定位装配和温循试验三种工况下,机械应力和热应力的叠加使玻璃绝缘子产生裂纹导致的,有限元仿真结果与实验结果基本吻合,为DIP封装器件在多工况下应力叠加失效的故障机理研究提供一种可参考的仿真方法。     

紫外光通信协作蜂群无人机网络动态能效均衡算法

针对蜂群无人机在复杂战场环境下的能效均衡需求,提出一种紫外光通信协作蜂群无人机网络动态能效均衡算法。该算法结合紫外光抗干扰、高保密的优点,为蜂群无人机提供一种可靠的通信方式,并通过引入自适应节点度、无人机能效和距离稳定度参数加权分簇来选举簇首,使算法更加适用于动态场景。最后结合无线紫外光通信及能量消耗模型,在高斯马尔可夫移动模型下对蜂群无人机进行了仿真分析,结果表明,本算法相比LEACH算法可以将网络生存周期提升16%,同时可将平均簇首数量降低57%,数据传输量提升近两倍。     

基于FPGA的宽带线性调频信号的产生与实现北大核心CSCD

随着激光雷达技术的迅速发展,激光雷达的作用距离、分辨力和测量精度等性能指标不断提高。为了提升测量精度和距离分辨力,要求发射信号具有大的带宽。宽带线性调频信号有助于提高激光雷达的距离分辨力。针对远程测距中激光雷达测距精度低的问题,本文首先分析和比较了几种产生宽带线性调频信号的方法,针对远程测距的应用场景,提出并设计了一种宽带线性调频信号的实现方法。通过Matlab仿真实验,证明实验实现的可行性。最后在FPGA上进行实现,产生了带宽为150 MHz,距离分辨力为1 m的宽带线性调频信号。