半导体量子点最低导带态的量子限制效应

采用最新计算方法和半导体体材料传统量子计算结果,系统研究了14种半导体(Si,Ge,Sn,AlSb,GaP,GaAs,GaSb,InP,InAs,InSb,ZnS,ZnSe,ZnTe,CdTe)的立方量子点,得到了最低导带态的量子限制效应结果,我们把量子点对尺寸的依赖关系分为三类并详细讨论了它们的差别。     

分析矩形光波导损耗的简易方法

利用有效折射率和修正的有效折射率方法对矩形光波导的损耗作了简单有效的分析，并且计算出了纵向传播系数和衰减系数的大小。     

Modified gravity on the brane and dark energy

We analyze the dynamics of an AdS₅ braneworld with matter fields when gravity is allowed to deviate from the Einstein form on the brane. We consider exact five-dimensional warped solutions which are associated with conformal bulk fields of weight –4 and describe on the brane the following three dynamics: those of inhomogeneous dust, of generalized dark radiation, and of homogeneous polytropic dark energy. We show that, with modified gravity on the brane, the existence of such dynamical geometries requires the presence of non-conformal matter fields confined to the brane.     

Research of spatial resolution in external electro-optic probing

A new method, based on zero point of longitudinal electric field, was used to determine the spatial resolution of external electro-optic (EO) probing equipment. Considering the diffraction of Gauss beam, the result of external EO probing was simulated which was in accordance with the experiment. A spatial resolution <1 μm was demonstrated initially in our equipment using 650 nm laser diode as probe beam and semi-insulating GaP as probe tip.     

单光子态的产生与测量

报道了通过自发参量下转换产生单光子态的实验研究,使用中心波长425 nm的飞秒脉冲泵浦Ⅰ类非共线相位匹配的BBO晶体,在实验上得到单光子计数率为2.978×10-4,并分析了实验中的相关问题.     

一种具有弹性服务质量要求的多业务最优接纳控制策略

随着无线网络所支持的业务种类的增加和具有弹性服务质量要求的业务的大量出现，与服务质量保证密切相关的呼叫接纳控制问题成了近年来无线网络研究的热点之一。本文研究了基于准马尔可夫决策过程方法的多业务最优呼叫接纳控制问题。根据业务的特点，首先引入了带宽分配满意度函数和收益率函数，在此基础上，提出了基于带宽分配满意度的最优带宽分配算法和基于准马尔可夫决策过程方法的最优呼叫接纳控制策略。计算结果表明，本文方案能够在对各类业务的呼叫阻塞率进行适当权衡的前提下，进一步提高网络的期望收益率和期望带宽利用率，同时满足了各类业务的最低服务质量要求。     

Toughness mechanism in polypropylene composites: Polypropylene toughened with elastomer and calcium carbonate

Polypropylene (PP) was modified with elastomer or CaCO₃ particles of two different sizes (1 μm and 50 nm) in various volume fractions. The dispersion morphology and mechanical properties of the two systems were investigated as functions of the particle size and volume fraction of the modifier. The brittle‐to‐tough transition occurred when the matrix ligament thickness was less than the critical ligament thickness, which was about 0.1 μm for the PP used here, being independent of the type of modifier. At the same matrix ligament thickness, the improvement of the toughness was obviously higher with the elastomer rather than with CaCO₃, but adding CaCO₃ increased the modulus of PP. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1656–1662, 2004     

光学非球面二次曲面常数及顶点曲率的研究

受光学非球面制造过程中诸工艺参数的影响,能否保证非球面顶点曲率及二次曲面常数的精度是一个重要问题。基于二次曲面方程,推导出确定光学非球面二次曲面常数k以及顶点曲率半径r的一组算法,并在对一块口径为760mm×200mm标准非球面反射镜的实际测算中进行拟合,经过优化,拟合精度达到Δk=0.015,Δr=0.341mm,从而有效的控制了光学非球面制造过程中的顶点曲率及二次曲面常数的偏差。     

三系数有限元向量尺度函数的构造

The aim of this paper is to present construction of finite element multiscaling function with three coefficients. In order to illuminate the result, two examples are given finally.     

非理想截面脊形介质光波导导波模式的研究

提出了一种求解任意截面形状脊形光波导的方法，先利用有效折射率的概念解出某种截面形状脊形光波导的等效折射率，再利用转移矩阵的理论求解出波导的模式色散方程。