二（2,4,4—三甲基戊基）膦酸稀土配合物的振动光谱

测定了二（２，４，４－三甲基戊基）膦酸（ＢＴＭＰＰＡ）及其稀土配合物Ｌｎ（ＢＴＭＰＰ）３在４０００～５０ｃｍ＾－１光谱区内的ＦＴ－ＩＲ光谱和部分配合物的激光拉曼光谱，对其谱带进行了经验归属。发现稀土氧键具有较高的离子键特性。由Ｌｎ－Ｏ伸缩振动频率值算出其近似力常数约８ｍ ｄｙｎ／ｎｍ。     

On the existence of periodic complementary binary sequences

Using the connection between periodic complementary binary sequences and difference families given by Bömer and Antweiler [2], we use number theoretic techniques to obtain necessary conditions for their existence when two or three sequences are involved. Our results provide theoretical proof for the nonexistence of PCS₃ ²⁰(a _i) and settle the open case PCS₂ ³⁶(a _i) of [2], negatively.Research partially supported by National Security Agency grant #MDA 904-90-H-4008.     

Understanding the newly observed Y(4008) by Belle

Very recently a new enhancement around 4.05 GeV was observed by the Belle experiment. We discuss some possible assignments for this enhancement, i.e. the ψ(3S) and D^*D̄^* molecular states. In these two assignments, Y(4008) can decay into J/ψπ⁰π⁰ with a branching ratio comparable with that of Y(4008)→J/ψπ⁺π^-. Thus, one suggests high energy experimentalists to look for Y(4008) in J/ψπ⁰π⁰ channel. Furthermore one proposes further experiments to search for the missing channels DD̄, DD̄^*+h.c. and especially χ_cJπ⁺π^-π⁰ and η_cπ⁺π^-π⁰, which will be helpful to distinguish the ψ(3S) and D^*D̄^* molecular state assignments for this new enhancement. PACS 13.30.Eg 13.75.Lb     

激光点火系统温度效应及其控制技术的研究

激光点火系统应用于武器系统必须符合高低温性能的要求。研究了激光点火系统的高低温特性,得到了激光二极管阈值电流和输出光功率随温度变化的规律。基于对规律的分析,研制了带温控技术的激光点火系统。该系统以单片机为控制部件,以TEC为温控部件,以负温度系数热敏电阻为测温元件。     

Micro-segregation model calculation of residual tin in boiler and pressure vessel steel

Tin is a typical residual element in steel and mainly originates from Sn-containing complex iron ore and steel scrap. The segregation of Sn in steel is harmful to the performances of steel. In this paper, the micro-segregation of residual element Sn during the solidification process of boiler and pressure vessel steel by micro-segregation model was studied. The results showed that the micro-segregation degree of Sn reduces apparently with the increase of cooling rate and remarkably deteriorates during the solidification process. When the initial content of C is higher than 0.1%, it will cause the solidification transform of the solid phase converting from the ferrite phase to austenite phase and the significant increase in the micro-segregation degree of Sn. However, increasing the initial contents of Si, Mn, P and S separately has non-significant effects on the micro-segregation degree of Sn. In addition, the improvement of initial content of Sn will lead to the micro-segregation degree decrease of Sn and has an inapparent impact on zero strength temperature and zero ductility temperature of the boiler and pressure vessel steel.     

Solvent Effect on the Photocatalytic Activity of g-C3N4/BiOBr and its Effect on Degradation of Acetochlor

Russian Journal of Physical Chemistry A - g-C3N4/BiOBr composites were obtained via solvothermal method. XRD, SEM, FTIR, UV–Vis DRS, BET, and BJH methods were used to characterize the...     

CO2-fixation into carbonate anions for the construction of 3d-4f cluster complexes with salen-type Schiff base ligands: from molecular magnetic refrigerants to luminescent single-molecule magnets

Six new carbonate-bridged Zn₂Ln₂ cluster complexes derived from salen-type Schiff base ligands [H₂L^a = N, N′-bis(3-methoxysalicylidene)-1,3-diaminopropane and H₂L^b = N, N′-bis(3-methoxysalicylidene)- 1,2-diaminoethane] have been synthesized. The bis-imine chain in Schiff base ligands have an obvious influence on the cluster complexes' structures, magnetic and luminescence properties. The carbonate bridging ligand exactly comes from autoimmobilization of carbon dioxide, which may mediate ferromagnetic coupling between Ln³⁺ ions, favoring magnetocaloric effects and single molecule magnet (SMM) properties. Complexes Zn₂Dy₂(μ³-CO₃)₂(L^a)₂(NO₃)₂(MeOH)₂ ( 1 ) and [Zn₂Dy₂(μ³-CO₃)₂(L^b)₂(NO₃)₂]·2MeOH ( 2) show field-induced SMM properties; complexes Zn₂Tb₂(μ³-CO₃)₂(L^a)₂(NO₃)₂(MeOH)₂ ( 3 ) and [Zn₂Tb₂(μ³-CO₃)₂(L^b)₂(NO₃)₂]·2MeOH ( 4 ) display both luminescence and field-induced SMM behaviors; while complexes [Zn₂Gd₂(μ³-CO₃)₂(L^a)₂(NO₃)₂]·2MeOH ( 5 ) and [Zn₂Gd₂(μ³-CO₃)₂(L^b)₂(NO₃)₂]·2MeOH ( 6 ) exhibit medium magnetic entropy changes, which are candidates for cryogenic molecular magnetic refrigerants.     

Samarium(II) Monoalkyl Complex Supported by a β-Diketiminato-Based Tetradentate Ligand: Synthesis,Structure, and Catalytic Hydrosilylation of Internal Alkynes

The synthesis and catalytic applications of trivalent rare-earth metal alkyl complexes have been well developed, but the chemistry of divalent rare-earth metal alkyl complexes lagged much behind. Herein, we report the synthesis, structure, and catalytic applications of a samarium(II) monoalkyl complex supported by a β-diketiminato-based tetradentate ligand, [LSmCH(SiMe₃)₂] (L=[MeC(NDipp)CHC(Me)NCH₂CH₂N(Me)CH₂CH₂NMe₂]⁻, Dipp=2,6-(iPr)₂C₆H₃). This complex is synthesized by the salt metathesis reaction of samarium iodide [LSm(μ-I)]₂ and KCH(SiMe₃)₂ in 63 % yield. Its structure is characterized by single-crystal X-ray diffraction, showing a distorted square-pyramid coordination geometry. This samarium(II) monoalkyl complex exhibits high catalytic activity in the hydrosilylation of aryl and methyl-substituted unsymmetrical internal alkynes with secondary hydrosilanes, selectively providing the α-(E) products in high yields.     

Biocatalytic Feedback-Controlled Non-Newtonian Fluids

Non-Newtonian fluids are ubiquitous in daily life and industrial applications. Herein, we report an intelligent fluidic system integrating two distinct non-Newtonian rheological properties mediated by an autocatalytic enzyme reaction. Associative polyelectrolytes bearing a small amount of ionic and alkyl groups are engineered: by carefully balancing the charge density and the hydrophobic effect, the polymer solutions demonstrate a unique shear thickening property at low pH while shear thinning at high pH. The urea-urease clock reaction is utilized to program a feedback-induced pH change, leading to a strong upturn of the nonlinear viscoelastic properties. As long as the chemical fuel is supplied, two distinct non-Newtonian states can be achieved with a tunable lifetime span. As a proof of concept, we demonstrate how the physical energy-driven nonequilibrium properties can be manipulated by a chemical-fueled process.     

Theoretical studies of photovoltaic properties of five new silol dithiophene based D2-A-D1-A-D2 donors

Organic solar cell of silol dithiophene based D₂-A-D₁-A-D₂/PC₇₁BM (D: donor part; A: acceptor part; 1 and 2 denote different units) possesses promising power conversion efficiency. Researchers have studied D₂-A-D₁-A-D₂ molecules carefully, including the effects of the different number of terminal thiophenes, the different central moiety (D₁), and the length of the alkyl chain. However, there are few investigations, especially theoretical studies, on the influences of different A (acceptor) units on the properties of D₂-A-D₁-A-D₂ molecule. In the present work, we have designed and modeled five new D₂-A-D₁-A-D₂ (D₂ = bithiophene and D₁ = silol dithiophene) donors by changing A units (A = diketopyrrolopyrrole, naphtho[1,2-c:5,6-c′]bis[1,2,5]thiadiazole, 5-fluoro-2,1,3-benzoselenadiazole, benzobisthiadiazole, and thiazolo[5,4-d]thiazole). We have applied density functional theory (DFT) and time-dependent DFT to predict their ground-state electronic structures and the UV–vis spectra, and the open circuit voltages (Vocs) of organic solar cells of D₂-A-D₁-A-D₂/PC₇₁BM. Based on the calculated results, we find that bithiophene thiazolo[5,4-d]thiazole siloldithiophene (BTTS) (D₂ = bithiophene, A = thiazolo[5,4-d]thiazole, D₁ = silol dithiophene) possesses the highest lowest unoccupied molecular orbital (−2.60 eV) and the lowest highest occupied molecular orbital (−5.33 eV) energies, and the strongest absorption in the visible region. Besides, the solar cell of BTTS/PC₇₁BM has the highest Voc of 1.02 V. These results indicate that it may be a promising donor. In contrast, bithiophene benzobisthiadiazole siloldithiophene (BBBS) (A = benzobisthiadiazole) has low absorption strength in the visible region, which indicates that it may not be a suitable donor material.