Efficient diode-pumped single-frequency erbium:ytterbium fiberlaser

We report a 7.6-mW single-frequency fiber laser operating at 1545 nm, using for the first time an Er³⁺:Yb³⁺ doped fiber and a fiber grating output coupler. The laser did not exhibit self-pulsation, which is a typical problem in short three-level fiber lasers, and had a relative intensity noise (RIN) level below -145.5 dB/Hz at frequencies above 10 MHz. The linewidth of the laser was limited by the relaxation oscillation sidebands in the optical spectrum and was typically less than 1 MHz     

Modeling ion implantation of HgCdTe

Ion implantation of boron is used to create n on p photodiodes in vacancy-doped mercury cadmium telluride (MC.T). The junction is formed by Hg interstitials from the implant damage region diffusing into the MC.T and annihilating Hg vacancies. The resultant doping profile is n⁺/n^-/p, where the n⁺ region is near the surface and roughly coincides with the implant damage, the n^- region is where Hg vacancies have been annihilated revealing a residual grown-in donor, and the p region remains doped by Hg vacancy double acceptors. We have recently developed a new process modeling tool for simulating junction formation in MC.T by ion implantation. The interstitial source in the damage region is represented by stored interstitials whose distribution depends on the implant dose. These interstitials are released into the bulk at a constant, user defined rate. Once released, they diffuse away from the damage region and annihilate any Hg vacancies they encounter. In this paper, we present results of simulations using this tool and show how it can be used to quantitatively analyze the effects of variations in processing conditions, including implant dose, annealing temperature, and doping background.     

Storage performance-metrics and benchmarks

The metrics and benchmarks used in storage performance evaluation are discussed. The technology trends taking place in storage systems, such as disk and tape evolution, disk arrays, and solid-state disks, are highlighted. The current popular I/O benchmarks are then described, reviewed, and run on three systems: a DECstation 5000/200 running the Sprite Operating System, a SPARCstation 1+ running SunOS, and an HP Series 700 (Model 730) running HP-UX. Two approaches to storage benchmarks-LADDIS and a self-scaling benchmark with predicted performance-are also described     

20-nm optical wavelength conversion using nondegenerate four-wavemixing

Wavelength conversion of optical signals over 20 nm is demonstrated using highly nondegenerate four-wave mixing in a semiconductor traveling-wave optical amplifier. This technique has the potential for extremely-high-speed operation and allows continuous tuning of both input and output wavelengths over the amplifier gain bandwidth. It is demonstrated that, even for such a large wavelength conversion range, it is possible to obtain conversion efficiencies in excess of -10 dB and high extinction ratios. The feasibility of the technique is demonstrated by system measurements at 622 Mb/s, showing a 1.1-dB power penalty at 10^-9 bit error rate (BER)     

FEM study of palladium and molybdenum clusters on an alumina covered field emitter

Palladium and molybdenum polycrystalline layers (clusters) have been deposited in a stainless steel UHV system onto a layer of alumina (Al₂O₃). This layer has been prepared by high temperature oxidation of an aluminium layer. The interaction of this system with nitrogen has been investigated at room temperature by an FEM technique. Under these conditions nitrogen spillover from molybdenum to palladium has been observed.     

Hydroxyl ion conduction in ytterbium-doped strontium cerate at T<580 K in H2O/air atmosphere

Open circuit voltage (OCV) measurements in H₂O/air concentration cells at T<580 K using Yb-doped SrCeO₃ electrolyte indicate that under these conditions, protons are transported through the electrolyte as -ve ions, possibly as hydroxyl (OH⁻) ions. The H⁺ ionic transport, which is generally reported, becomes the dominant mode for H₂O/air concentration cells at temperatures greater than 750 K or when H₂O/air electrodes are replaced by H₂/Ar, and the anomalous OCV sign disappears. The combination of low temperature and the presence of hydrogen and oxygen as provided by the H₂O/air system appears to be necessary for the postulated hydroxyl ion electrode reactions to take place. In addition to OCV measurements, results from impedance spectroscopy are used to provide evidence in support of the suggested hydroxyl ion mode of protonic transport under the specified conditions. These findings are directly relevant in the development of novel humidity sensors in the temperature range 450–580K and is reported in a separate paper in this conference. Paper presented at the 3rd Euroconference on Solid State Ionics, Teulada, Sardinia, Italy, Sept. 15–22, 1996     

The structure and management of service level agreements innetworks

The paper proposes a structure for quality-of-service (QoS)-centered service level agreements (SLA), and a framework for their real-time management in multiservice packet networks. The SLA is structured to be fair to both parties, the service provider and their customer. The SLA considered here are for QoS assured delivery of aggregate bandwidth from ingress to egress nodes; however, the control and signaling is for the more granular flows or calls. A SLA monitoring scheme is presented in which revenue is generated by the admission of flows into the network, and penalty incurred when flows are lost in periods when the service provider is not SLA compliant. In the SLA management scheme proposed, the results of a prior off-line design are used, in conjunction with measurements taken locally at ingress nodes, to classify the loading status of routes. The routing and resource management are based on virtual partitioning and its supporting mechanism of bandwidth protection. The effectiveness of SLA management is measured by the robustness in performance in the presence of substantial diversity in actual traffic conditions. A simulation testbed called D'ARTAGNAN has been built from which we report numerical results for a case study. The results show that the SLA management scheme is robust, fair and efficient over a broad range of traffic conditions     

SAR-retrieved wind in polar regions-comparison with in situ data and atmospheric model output

European remote sensing (ERS) satellites synthetic aperture radar (SAR) wind retrievals using CMOD-IFR2 are, for the first time, retrieved in the marginal ice zone (MIZ) and in Arctic coastal areas and compared with in situ observations from reseach vessels (RVs) and output from a high-resolution atmospheric model. The root mean squares (rms) of the comparisons were 1.6 m s/sup -1/ and 2 m s/sup -1/, respectively. The spatial variation of the SAR wind fields established a decrease in wind speed close to the ice edge for the late summer situations where the wind was along the ice edge with the ice to the left. This decrease is believed to be due to changes in atmospheric stability, possibly through development of an internal boundary layer caused by the cold ice cover and melt water. Lower wind speed near the ice edge is confirmed by the atmospheric model and the in situ observations. Furthermore, good results are obtained from SAR wind retrieval in leads when compared with model output during a cold-air outbreak. Routine measurements in the MIZ are useful for estimating the wind stress, and therefore SAR may play an important role in this region. Finally, the identification of a jet out from Hinlopen Strait in the Svalbard region and low wind wakes along the coast in the SAR-retrieved wind field is confirmed by in situ observations as the RV moves through the region. The jet is also confirmed by the atmospheric model, which is able to reproduce the situation.     

A robust classification procedure based on mixture classifiers and nonparametric weighted feature extraction

There are many factors to consider in carrying out a hyperspectral data classification. Perhaps chief among them are class training sample size, dimensionality, and distribution separability. The intent of this study is to design a classification procedure that is robust and maximally effective, but which provides the analyst with significant assists, thus simplifying the analyst's task. The result is a quadratic mixture classifier based on Mixed-LOOC2 regularized discriminant analysis and nonparametric weighted feature extraction. This procedure has the advantage of providing improved classification accuracy compared to typical previous methods but requires minimal need to consider the factors mentioned above. Experimental results demonstrating these properties are presented.