乳状液法制备憎液溶胶Ⅰ.BaCO_3均匀粒子的制备

均匀胶体粒子的形成，除与反应条件（反应物浓度、陈化时间和温度、介质种类等）有关外，反应体系的环境也影响最终产物的形态，《至结晶结构．气溶胶法和微乳液法正是利用微环境中的‘水池效应”；分别制备出球形亚微米和纳米级的均匀粒子［‘－‘］、这些方法与水解法和相转化法等方法比较，反应物浓度要大几个数量级，而反应时间却短很多，因而受到研究人员的关注．乳状液也能提供亚微米、微米及以上级的微环境，因此，可以应用O／W乳状液乳液中的聚合反应制备亲液的分散体系．然而，极少有关利用w／O乳状液制备僧液溶胶的报导问；最近…     

甲基丙烯酸羟烷基酯与丙烯腈或丙烯酰胺共聚合的研究

测定了亲水性甲基丙烯酸羟烷基酯如HEMA、MHPMA分别与AN或AAM,在60℃不同溶剂中自由基聚合反应的竞聚率。AN(M_1)-HEMA(M_2)共单体,在DMSO或DMF溶剂以AIBN或KPS-IPA引发剂条件下共聚,用Kelen-Tüds法计算的竞聚率变化不大,r_1=0.22-0.25、r_2=0.97-1.05,说明在此均相溶液共聚中,所用的溶剂及引发剂对竞聚率的影响较小,这两种单体能很好共聚。但AAM-MHPMA或AAM-HEMA共单体时,r_1与r_2值相差很大,如前者r_1=0.0433、r_2=3.98,后者r_1=0.0535、r_2=1.89,说明不易共聚,共聚物中主要是MHPMA或HEMA组分。     

A new two‐dimensional CdII coordination polymer constructed by pyrazine‐2,3‐dicarboxyl­ate

In the title compound, poly[μ₅‐pyrazine‐2,3‐dicarboxyl­ato‐cadmium(II)], [Cd(C₆H₂N₂O₄)]_n or [Cd(pdc)]_n, where pdc is the pyrazine‐2,3‐dicarboxyl­ate anion, the Cd^II atom is six‐coordinated by five carboxyl­ate O atoms and one N atom from five different pdc ligands in a distorted octa­hedral CdO₅N coordination geometry. Two Cd^II atoms are bridged by carboxyl­ate groups of the pdc ligands to create a dimeric unit. The dimeric units are further connected by the pdc ligands to generate an inter­esting two‐dimensional structure.     

Fine structures of zeolite-Linde-L (LTL): surface structures, growth unit and defects

High-resolution electron microscopy (HREM) has been used to image the surface structure of nano- and micrometer-sized synthetic crystals of zeolite-Linde-L (LTL). Columnar holes and rotational, nano-sized, wheel-like defects were observed within the crystals, where the hole has a minimum size equal to that of the rotational defect. Predictions of surface structure from atomistic computer simulation concur with the observations from HREM and provide insight into the crystal growth mechanism of perfect and defective LTL. Analysis of the energetics of the formation of rotational defect structures reveals that the driving force for defect creation is thermodynamic and furthermore, the rotational defects could be created in high concentrations. Formation of a columnar hole is found to be slightly energetically unfavourable and therefore we speculate that the incidence of both rotational and nano-sized vacancy defects is strongly dependent on kinetic factors and reaction conditions. The morphology of nano- and microcrystalline LTL is contradistinct and we use insights from simulation to propose an explanation of the disparity in crystal shape.     

Analysis of guanidine in high salt and protein matrices by cation-exchange chromatography and UV detection

A simple and sensitive HPLC method for quantitative determination of guanidine in high salt and protein matrices was developed. The HPLC system consisted of an Agilent 1100 pump with an online degasser, a UV detector, an autosampler, and Dionex CS 14 cation-exchange guard (4 mm x 50 mm) and analytical (4 mm x 250 mm) columns. The mobile phase was 3.75 mM methanesulfonic acid (MSA) with a flow rate of 1 mL/min. The other analysis parameters were: 50 microL injection volume, 195 nm UV detection, and 21 min runtime. The limit of quantitation (LOQ) for guanidine HCl was determined to be 0.25 mg/L and the standard curve ranged from 0.25 mg/L to 10 mg/L. Sample preparation was required for the samples containing high protein concentrations. Proteins were removed by centrifuging a sample in a 30 K NanoSep centrifugal filter at 15,300 x g for 20 min. The method could determine guanidine accurately in sample matrices containing up to 200 mM sodium ion or up to 50 mM potassium ion. The method can be used for clearance testing of guanidine in biopharmaceutical products.     

Hydrogenation of CO over carbides of tungsten

CO hydrogenation on tungsten carbides has been investigated.The methanation activitiesof tungsten carbides are comparable to that of supported Group VIII metal catalysts.Temperature-programmed thermal desorption spectra of CO on tungsten carbide show that CO is adsorbed non-dissociatively,and the surface—CO bond appears to be rather weak.     

抛物型等效法研究指数型梯度折射率纤维的成像

本文采用抛物型等效法研究指数型梯度折射率纤维的成像特性。这种方法计算比严格解析法方便,精度比锥形等效法高,且适用范围大。     

配合物聚合反应研究──Ⅱ．以二氨基磺磷酸盐配合物合成聚脲

以二氨基磺酸盐配合物合成了一系列主链上合金属元素（Ｃａ，Ｎｉ，Ｃｏ，Ｃｕ）的聚脲聚合物．用ＩＲ和１ＨＮＭＲ对其结构进行了表征，以ＴＧ－ＤＴＡ研究了其热性能，并讨论了金属元素种类及其含量对聚脲聚合物溶液粘度的影响．     

非对称碰撞约束下形状记忆合金梁的随机响应与分岔

形状记忆合金(SMA)是二十一世纪具有形状记忆效应的新型智能材料.针对具有非对称约束的SMA梁,本文构造了碰撞振动系统.在无碰撞和有碰撞两种情况下,利用随机平均法给出了近似解析结果.数值模拟作为验证解析结果的工具.结果表明,系统能量的概率响应曲线具有非光滑特性.当约束位置发生变化时,系统会出现随机P分岔和D分岔.     

材料加工用激光束质量初探

本文从激光材料加工的角度讨论了以M2参数作为光束质量评价标准的可能性。指出对穿透式的加工方式,M2参数可以表示光束的实用价值,但对表面加工方式,M2参数的大小并不能反映光束实际的实用价值。