Preparation of Sr2CeO4:Eu3+,Dy3+ white luminescence phosphor particles and thin films by using an emulsion liquid membrane system

Sr(2)CeO(4) and Sr(2)CeO(4):Eu(3+),Dy(3+) phosphor particles and thin films were prepared by using an emulsion liquid membrane (ELM, water-in-oil-in-water (W/O/W) emulsion) system, containing VA-10 (2-methyl-2-ethylheptanoic acid) as extractant (cation carrier). A two-step extraction enabled efficient extraction for Sr(3+) and rare earth ions, and the resulting precursor metal oxalate particles produced in the internal water phase of the ELM system were about 60 nm in diameter. Calcination of the oxalate particles in air gave submicrometer-sized Sr(2)CeO(4) and Sr(2)CeO(4):Eu(3+),Dy(3+) particles, which showed blue and white luminescence, respectively, by UV excitation. Blue and white luminescence phosphor thin films were also prepared by soaking alumina substrates into the W/O emulsion containing precursor oxalate particles, followed by calcination in air.     

General Information to Obtain Spherical Particles with Ordered Mesoporous Structures

Conditions for the synthesis of aluminum organophosphonate (AOP) and aluminophosphate (AlPO) spheres containing periodic mesopores were optimized and demonstrated to be general morphological controls for the surfactant‐assisted synthesis of mesoporous materials. High‐quality AOP and AlPO spheres with uniform mesopores were obtained at low and high temperatures, respectively. The aerosol‐assisted synthesis of materials with uniform mesopores was categorized by using the difference in relative density of soluble AOP and AlPO oligomers that interact with ethylene oxide (EO) units in EO_nPO_mEO_n triblock copolymer (PO=propylene oxide). Then, ordered mesoporous structures are constructed with the adequate amount of species in resultant frameworks, and the number of interactive points in soluble species determines the resultant density of the frameworks after self‐assembly. Consequently, temperature‐dependent synthesis, which allows controlled infiltration of soluble species to match the density of resultant frameworks, is required for the formation of ordered mesoporous structures under morphological control.     

Adsorption of ammonia and water on functionalized edge-rich carbon nanofibers

The preparation, characterization and ammonia and water adsorption properties of edge-rich carbon nanofibers (CNFs) were studied, including platelet CNFs (PCNFs) and cup-stacked CNFs (CSCNFs). Since PCNFs and CSCNFs have many chemically active exposed edges, functionalization by oxidizing the edges was carried out by ozone stream and by nitric acid. Transmission electron microscopy, N₂ adsorption isotherms and temperature-programmed desorption analysis showed that the nitric acid treatment partly destroyed the graphite structure of the PCNFs and created acid functional groups and micropores, whereas the ozone treatment created functional groups without damaging the structure. Ammonia adsorption isotherms clarified that NH₃ adsorption on PCNFs and CSCNFs occurred mainly on oxygen-containing groups, whereas the adsorption on activated carbon fibers (ACFs) occurred on both oxygen-containing groups and the carbon surface without the functional groups, and the CSCNFs showed larger amounts of adsorbed ammonia compared to the PCNFs. Especially at a relatively low pressure range (<0.2 atm), the PCNFs/CSCNFs/ACFs showed the same ammonia adsorption mechanism; that is, the one-to-one interaction between oxygen atoms in the functional groups and hydrogen atoms in ammonia molecules. In addition, the adsorption on the ACFs appeared to occur mainly by interaction with the carbon surface at relatively high pressure (0.3–1.0 atm). Our experimental results and previous findings suggest that NH₃ adsorption on PCNFs is due mainly to NH…O hydrogen bonding between oxygen-containing groups and ammonia rather than to chemical bonding.     

Controlling the photochemical reactions of alkenes by light-path length effects of a microchannel reactor

Photoirradiation of Me₂CO–H₂O solution of pent-4-en-1-ol (1a) with a high-pressure mercury lamp in a test tube gave 8-hydroxyoctan-2-one (3a) in 66 % yield along with oxetane (4a) and the isomer (4a′) in 10 % yield. Irradiation of the running Me₂CO–H₂O solution of 1a in the flow system of a microchannel reactor (MCR) gave mainly 4a. The photoreaction of 1,1-diphenylethene (2a) with triethylamine gave a Markovnikov-type adduct (5a) and an anti-Markovnikov-type adduct (6a). The use of the MCR enhanced the production of 5a. These phenomena were explained by the light-path length effects of the MCR.     

Reinvestigation of palladium-catalyzed allylation of the monoacetate of 4-cyclopentene-1,3-diol and synthesis of the coronafacic acid ethyl ester

A larger quantity of a β-keto ester that is 1.5–1.7 equiv more than the base (t-BuOK, NaH) was found to be essential in securing sufficient yields of the products in the palladium-catalyzed allylic substitution of the monoacetate of 4-cyclopentene-1,3-diol with β-keto esters. This requirement also works well for substitutions with the TBS ether of the monoacetate and the monoacetate of 2-cyclohexene-1,4-diol. As an application, the coronafacic acid ethyl ester was synthesized as an optically active form.     

Cyclic sample pooling using two‐dimensional liquid chromatography system enhances coverage in shotgun proteomics

We report a cyclic sample pooling technique devised in two‐dimensional liquid chromatography–electrospray ionization mass spectrometry (LC‐ESI‐MS) shotgun proteomics that renders deeper proteome coverage; we combined low pH reversed‐phase (RP) LC in trifluoroacetic acid in the first dimension, followed by cyclic sample pooling of the eluate and low‐pH RP‐LC in formic acid in the second dimension. The new protocol has a significantly higher resolving power suitable for LC‐ESI‐MS/MS shotgun proteomics. Copyright © 2013 John Wiley & Sons, Ltd.     

Multifunctional Core‐Shell‐Corona‐Type Polymeric Micelles for Anticancer Drug‐Delivery and Imaging

We have developed core‐shell‐corona‐type polymeric micelles that can integrate multiple functions in one system, including the capability of accommodating hydrophobic dyes into core and hydrophilic drug into the shell, as well as pH‐triggered drug‐release. The neutral and hydrophilic corona sterically stabilizes the multifunctional polymeric micelles in aqueous solution. The mineralization of calcium phosphate (CaP) on the PAA domain not only enhances the diagnostic efficacy of organic dyes, but also works as a diffusion barrier for the controlled release.     

Single‐Electron‐Transfer (SET)‐Induced Oxidative Biaryl Coupling by Polyalkoxybenzene‐Derived Diaryliodonium(III) Salts

Metal‐free oxidative C? C coupling by using polyalkoxybenzene‐derived diaryliodonium(III) salts as both the oxidant and aryl source has been developed. These salts can induce single‐electron‐transfer (SET) oxidation to yield electron‐rich arenes and subsequently transfer the polyalkoxyphenyl group into in situ generated aromatic radical cations to produce biaryl products. The reaction is promoted by a Lewis acid that activates the iodonium salts. It has been revealed that the reactivity of the salts under acidic conditions is quite different to their known behavior under basic conditions. The reactivity preference of a series of iodonium salts in the SET oxidation and their ligand transfer abilities have been systematically investigated and the results are summarized in this report.     

Temperature dependence of free volume of polyacrylamide gels studied by positron lifetime measurements

Changes of positronium (Ps) cavity radii in polyacrylamide and poly(N-isopropylacrylamide) gels were studied from 120 to 300 K by positron lifetime technique and it has been shown that the Ps cavity radius in the hydrogels changes by three or four stages. Temperature dependence of the Ps cavity radius exhibits variations similar to common polymers around the glass transition temperature. Hydrophilicity of the polymer chains significantly affects the Ps cavity radius just below 273 K. These results suggest an important role of free volume on the state of water in hydrogels.