High performance liquid chromatography with an electrochemical detector in the cathodic mode as a tool for the determination of p-nitrophenol and assay of acid phosphatase in urine samples

Utilizing a commercially available helium-purging device and PEEK tubes for all tubing, especially for connection between the mobile phase and pump, high performance liquid chromatography with an electrochemical detector (ECD/HPLC) at the cathodic mode is a simple and precise method for the determination of p-nitrophenol (NP). Studies with cyclic and hydrodynamic voltammetry indicated that 25% aqueous MeOH containing 0.1% (v/v) CF(3)CO(2)H and -0.8 V vs. Ag/AgCl are the best mobile phase and detection potential for cathodic ECD/HPLC. With the present system, the limits of detection and determination were 0.2 and 0.25 microM, respectively, and up to 50 microM, a linear calibration curve was afforded. Within-day precisions for the analysis of 5 and 50 microM NP were 0.8 and 0.7% (n=6), respectively, and between-day precisions (n=6) for these samples were 3.5 and 2.2%, respectively. Compared with the commonly used Bessey-Lowry-Brock method, cathodic ECD/HPLC was useful for the assay of acid phosphatase in urine samples with p-nitrophenyl phosphate disodium salt as a substrate.     

First example of chiral N-heterocyclic carbenes as catalysts for kinetic resolution

Chiral N-heterocyclic carbenes, which are derived from C2-symmetric 1,3-bis(1-arylethyl)imidazolium salts, catalyze enantioselective acylation of racemic secondary alcohols.     

Ca0.8Y2.4Sn0.8O6, a quaternary oxide with mixed occupations of Ca/Y and Y/Sn

A new quaternary oxide, calcium yttrium stannate, Ca_0.8Y_2.4Sn_0.8O₆, is isostructural with Mg₃TeO₆ (trigonal, R). The empirical formula can be expressed as (Ca_0.2667Y_0.7333)₆(Y_0.4Sn_0.6)SnO₁₂. The Ca/Y site has a distorted coordination octa­hedron of O atoms, with Ca/Y—O distances ranging from 2.227 (3) to 2.350 (3) Å, while the octa­hedra of O atoms that coordinate to the Sn and Y/Sn sites are nearly regular, with an Sn—O distance of 2.066 (2) Å and a Y/Sn—O distance of 2.147 (3) Å.     

TUMOR IMAGING WITH [111niIn]MONO-DTPA-ETHYLENEGLYCOL-Ga-DEUTEROPORPHYRIN

Abstract Mono-DPTA-ethyleneglycol-Ga-deuteroporphyrin (MDEGD) was synthesized, by coordinating non-radioactive Ga in the porphyrin ring and connecting DTPA (diethylene-triamine-N,N,N,N,N,-pentaacetic acid) to its side chain. By labeling with 111_In, chemicals for scintigraphy were developed. They were applied to Syrian golden hamsters with implanted pancreatic gland cancers and C57-black mice with Lewis lung cancer to enable tumor imaging and biodistribution examination. A comparative study was also conducted with [⁶⁷Ga]citrate. In the resultant data, [¹¹¹In]MDEGD showed larger tumor/lung, tumor/kidney and tumor/blood ratio with [⁶⁷Ga]citrate. The affinity of [ⁿIn]MDEGD in inflammatory tissue was much lower than that of ⁶⁷Ga citrate. [¹¹¹In]MDEGD lost its photosensitivity.     

Structural studies of the carbon monoxide complex of [NiFe]hydrogenase from Desulfovibrio vulgaris Miyazaki F: suggestion for the initial activation site for dihydrogen

The carbon monoxide complex of [NiFe]hydrogenase from Desulfovibrio vulgaris Miyazaki F has been characterized by X-ray crystallography and absorption and resonance Raman spectroscopy. Nine crystal structures of the [NiFe]hydrogenase in the CO-bound and CO-liberated forms were determined at 1.2-1.4 A resolution. The exogenously added CO was assigned to be bound to the Ni atom at the Ni-Fe active site. The CO was not replaced with H(2) in the dark at 100 K, but was liberated by illumination with a strong white light. The Ni-C distances and Ni-C-O angles were about 1.77 A and 160 degrees, respectively, except for one case (1.72 A and 135 degrees ), in which an additional electron density peak between the CO and Sgamma(Cys546) was recognized. Distinct changes were observed in the electron density distribution of the Ni and Sgamma(Cys546) atoms between the CO-bound and CO-liberated structures for all the crystals tested. The novel structural features found near the Ni and Sgamma(Cys546) atoms suggest that these two atoms at the Ni-Fe active site play a role during the initial H(2)-binding process. Anaerobic addition of CO to dithionite-reduced [NiFe]hydrogenase led to a new absorption band at about 470 nm ( approximately 3000 M(-1)cm(-1)). Resonance Raman spectra (excitation at 476.5 nm) of the CO complex revealed CO-isotope-sensitive bands at 375/393 and 430 cm(-1) (368 and 413 cm(-1) for (13)C(18)O). The frequencies and relative intensities of the CO-related Raman bands indicated that the exogenous CO is bound to the Ni atom with a bent Ni-C-O structure in solution, in agreement with the refined structure determined by X-ray crystallography.     

A mesoporous non-precious metal boride system: synthesis of mesoporous cobalt boride by strictly controlled chemical reduction

Generating high surface area mesoporous transition metal boride is interesting because the incorporation of boron atoms generates lattice distortions that lead to the formation of amorphous metal boride with unique properties in catalysis. Here we report the first synthesis of mesoporous cobalt boron amorphous alloy colloidal particles using a soft template-directed assembly approach. Dual reducing agents are used to precisely control the chemical reduction process of mesoporous cobalt boron nanospheres. The Earth-abundance of cobalt boride combined with the high surface area and mesoporous nanoarchitecture enables solar-energy efficient photothermal conversion of CO₂ into CO compared to non-porous cobalt boron alloys and commercial cobalt catalysts.

Generating high surface area mesoporous transition metal boride is challenging but interesting because incorporation of boron atoms can generate lattice distortion to form amorphous metal boride which has unique properties in catalysis.     

Identification of beta-decay of150La

The -decay of¹⁵⁰La, the heaviest isotope of lanthanum, has been identified by observing -rays from mass separated activities obtained at KUR-ISOL. From the decay curves of 97.0 and 208.7 keV -rays in¹⁵⁰Ce and of Ce-K X-ray, the half-life of¹⁵⁰La has been determined as 0.51(3) s. This value is in agreement with theoretical predictions from microscopic theory.     

Key aspects of crystalline Mo-V-O-based catalysts active in the selective oxidation of propane

Mo-V-O-based complex metal oxide catalysts were synthesized hydrothermally for the first time, characterized structurally and tested in the selective oxidation of propane to acrylic acid, and the results obtained were compared on the basis of catalyst crystal structures in order to clarify key aspects of alkane selective oxidation over multifunctional metal oxide catalysts. The catalysts tested were black solids of rod-shaped crystals, which had a layer structure in the direction of fiber axis and various high dimensional arrangements of metal octahedra in the cross-section plane. A strong dependency on the octahedra arrangements and a facet dependency were observed, and the roles of metal elements in the course of selective oxidation of propane were clarified by comparing the catalytic performance of various Mo-V-O-based catalysts. We discuss the multi-functional character derived from high dimensional structures of the catalysts and mechanism of the selective oxidation of propane.