Reduction of nitroaromatics to arylnitrenium ions by vinyl halide cations

The title reduction of nitroaromatics ArNO(2) by vinyl halide radical cations CH(2)[double bond]CH-X(+*)(X = Cl or Br) to form arylnitrenium ions ArNH(+) involves a change in oxidation number of nitrogen from +3 to -1. This novel reaction provides a new route for the generation of arylnitrenium ions, a highly selective method for the detection of explosives in mixtures, and offers clues to the carcinogenic activity of nitroaromatics in vivo.     

Direct and quantitative analysis of underivatized acylcarnitines in serum and whole blood using paper spray mass spectrometry

A simple protocol for rapid quantitation of acylcarnitines in serum and whole blood has been developed using paper spray mass spectrometry. Dried serum and whole blood containing a mixture of ten acylcarnitines at various concentrations were analyzed as spots from paper directly without any sample pretreatment, separation, or derivatization. The composition of the spray solvent was found to be a critical factor: for serum samples, spray solvent of methanol/water/formic acid (80:20:0.1) gave the best signal intensity while for blood samples which contain more matrix components, acetonitrile/water (90:10) was a much more suitable spray solvent. For the paper type and size used, 0.5 μL of sample provided an optimal signal for both serum and whole blood samples. For quantitative profiling, the limits of quantitation obtained from both serum and blood were much lower than the clinically validated cutoff values for diagnosis of fatty acid oxidation disorders in newborn screening. Linearity (R(2) > 0.95) and reproducibility (RSD ~10 %) were achieved in the concentration ranges from 100 nM to 5 μM for the C2 acylcarnitine, and for other acylcarnitines, these values were from 10 to 500 nM. Acylcarnitine profiles offer an effective demonstration of the fact that paper spray mass spectrometry is an appropriate, simple, rapid method with high sensitivity and high reproducibility applicable to newborn screening tests.     

Tailoring the structure of metal oxide nanostructures towards enhanced sensing properties for environmental applications

The present article reviews recent works in our laboratory about the sensing properties to toxic gases using nanostructured WO(3), TiO(2), FTiO(2), and CuO functionalized quartz crystal microbalance (QCM) sensors. WO(3) and TiO(2) functionalized QCM sensors have much shorter response time than those functionalized by conventional hydrogen-bond acidic branched copolymers for detection of dimethyl methylphosphonate (DMMP). FTiO(2) functionalized QCM sensors can improve the gas sensing characteristics by shortening the response time but at the price of partial irreversibility. The sensing mechanism was examined by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Varied CuO nanostructures were synthesized by simple modulation of reaction conditions. All the as-prepared CuO was applied on QCM resonators and explored for HCN sensing. Surprisingly, responses of all the sensors to HCN were found to be in an opposite direction as compared with other common volatile substances, offering excellent selectivity for HCN detection. The sensitivity was very high, and the response and recovery were very fast. Comparison of the specific surface areas of CuO nanostructures showed that CuO of higher surface area is more sensitive than that of lower surface area, indicating that the specific surface area of these CuO nanostructures plays an important role in the sensitivity of related sensors. Based on experimental results, a sensing mechanism was proposed in which a surface redox reaction occurs between CuO and Cu(2)O on the CuO nanostructures reversibly upon contact with HCN and air, respectively. The CuO functionalized QCM sensors are considered to be a promising candidate for trace HCN gas detection in practical applications.     

Synthesis and Characterization of Cationic Glycidyl-Based Poly(aminoester)-Folic Acid Targeting Conjugates and Study on Gene Delivery

A new poly(aminoester) (EPAE-FA) containing folic acid and amino groups in the backbone and side chain was synthesized. EPAE-FA self-assembled readily with the plasmid DNA (pCMV-βgal) in HEPES buffer and was characterized by dynamic light scattering, zeta potential, fluorescence images, and XTT cell viability assays. To evaluate the transfection effect of graft ratio of FA on the EPAE system, EPAE-FA polymers with two different graft ratios (EPAE-FA12k and EPAE-FA14k) were also prepared. This study found that all EPAE-FA polymers were able to bind plasmid DNA and yielded positively charged complexes with nano-sized particles ( < 200 nm). To assess the transfection efficiency mediated by EPAE and EPAE-FA polymers, we performed in vitro transfection activity assays using FR-negative (COS-7) and FR-positive (HeLa) cells. The EPAE-FA12k/DNA and EPAE-FA14k/DNA complexes were able to transfect HeLa cell in vitro with higher transfection efficiency than PEI25k/DNA at the similar weight ratio. These results demonstrated that the introduction of FA into EPAE system had a significant effect on transferring ability for FR-positive cells (HeLa). Examination of the cytotoxicity of PEI25k and EPAE-FA system revealed that EPAE-FA system had lower cytotoxicity. In this paper, EPAE-FA seemed to be a novel cationic poly(aminoester) for gene delivery and an interesting candidate for further study.     

Rapid finding and quantification of the major antioxidant in water extracts of three marine drug organisms from China by online HPLC-DAD/MS-DPPH

A method based on high-performance liquid chromatography (HPLC) with diode array detector coupled with electrospray ionisation-mass spectrometry and an online detection system for radical scavenging was established and used to rapidly find and quantify antioxidant compounds in the water extracts of Hippocampus japonicus Kaup, Hippocampus kuda Bleeker and Syngnathus acus Linnaeus. The online screening results revealed the presence of one major radical scavenging compound identified as hypoxanthine by comparison of mass data and retention time with the standard. Subsequently, the developed HPLC method was applied to quantify hypoxanthine in different H. japonicus, H. kuda and S. acus samples. The results indicated that the developed HPLC method is simple and reliable for the quantification of hypoxanthine with a detection limit at 0.002 μg mL(-1), and a high recovery from 96.3% to 102.1%. This method provides a powerful tool for rapid identification and quantification of free radical scavenging compounds in complex marine natural products.     

Monodisperse rutile microspheres with ultrasmall nanorods on surfaces: Synthesis, characterization, luminescence, and photocatalysis

This work demonstrates the process of building optoelectrically cooperative surface wetting in smart and precise way. The superhydrophobic photosensitive film is constructed with TiO(2) nanotube arrays. Compared with conventional organic dyes, CdS quantum dots (QDs) as sensitizer layer are modified on TiO(2) nanotubes surface to improve photosensitivity of the composited surface in visible light region, which offer the benefit for designing and fabricating solid state hetero-junction devices. ITO glass is introduced as top electrode to apply electrical and optical stimuli and the patterned wetting is instantly obtained with masking light through ITO. The optoelectrically cooperative wettability conversion occurred on superhydrophobic TiO(2) nanotube surface at critical voltage of 12 V, which was decreased by 18 V comparing with only using electric stimulus. This study provides potential applications for TiO(2) nanotube arrays to the associated research of liquid reprography, location-controlled microfluidic device and lab-on-chip.     

Chemical profiling of constituents of Smilacis glabrae using ultra-high pressure liquid chromatography coupled with LTQ Orbitrap mass spectrometry

A reliable LC-MS method has been applied for the separation and identification of major constituents of the rhizome of Smilacis glabrae. Identification of the constituents was carried out by interpretation of their retention time, and MS and MS/MS data, especially by comparing these with Sarcandra glabra under the same LC-MS conditions, as well as the data provided by the literature. Thirty-three compounds, including catechin derivatives, flavanonols, phenolic acid derivatives and phenylpropanoid glycosides were either identified or tentatively characterized. Among them, compound 12 was deduced to be a new phenylpropanoid-substituted catechin. Fragmentation behaviors of the three major categories of compounds were also investigated. This UPLC-PDA/ESI-MS(n) method was effective for the separation and identification of the constituents and could be the basis for the comprehensive quality control of Smilacis glabrae.     

A facile two-step etching method to fabricate porous hollow silica particles

We report here the fabrication of hollow silica particles with mesopores larger than 10 nm on their wall via a facile two-step etching method. Different from the conventional template method, the new method uses the silica particles as starting materials, which were synthesized using the well-known Stöber method. In the hollow silica preparation, first, we gently etch the silica particles with a NaOH solution without using template molecules to make them porous. Then, we coat the porous silica particles with poly-dimethyldiallylammonium chloride (PDDA) and treat the PDDA-coated porous silica with an ammonia solution to form the hollow silica nanospheres. In this study, we found that the NaOH dosage and ammonia concentration have significant impact on the morphology of the final products. Adsorption was also studied and results show that the hollow nanospheres can effectively uptake protein-based biomolecules (hemoglobin).     

Modeling of oxygen transport and cell killing in type-II photodynamic therapy

Photodynamic therapy (PDT) provides an effective option for treatment of tumors and other diseases in superficial tissues and attracts attention for in vitro study with cells. In this study, we present a significantly improved model of in vitro cell killing through Type-II PDT for simulation of the molecular interactions and cell killing in time domain in the presence of oxygen transport within a spherical cell. The self-consistency of the approach is examined by determination of conditions for obtaining positive definitive solutions of molecular concentrations. Decay constants of photosensitizers and unoxidized receptors are extracted as the key indices of molecular kinetics with different oxygen diffusion constants and permeability at the cell membrane. By coupling the molecular kinetics to cell killing, we develop a modeling method of PDT cytotoxicity caused by singlet oxygen and obtain the cell survival ratio as a function of light fluence or initial photosensitizer concentration with different photon density or irradiance of incident light and other parameters of oxygen transport. The results show that the present model of Type-II PDT yields a powerful tool to quantitate various events underlying PDT at the molecular and cellular levels and to interpret experimental results of in vitro cell studies.     

Carbon monoxide-assisted synthesis of single-crystalline Pd tetrapod nanocrystals through hydride formation

Carbon monoxide can adsorb specifically on Pd(111) to induce the formation of unique Pd nanostructures. In the copresence of CO and H(2), single-crystalline Pd tetrapod nanocrystals have now been successfully prepared. The Pd tetrapods are enclosed by (111) surfaces and are yielded through hydride formation. Density functional theory calculations revealed that the formation of PdH(x) in the presence of H(2) reduces the binding energy of CO on Pd and thus helps to decrease the CO coverage during the synthesis, which is essential to the formation of the PdH(x) tetrapod nanocrystals. In addition to tetrapod nanocrystals, tetrahedral nanocrystals were also produced in the copresence of CO and H(2) when the reaction temperature was ramped to further lower the CO coverage. Upon aging in air, the as-prepared PdH(x) nanocrystals exhibited a shape-dependent hydrogen releasing behavior. The conversion rate of PdH(x) tetrapod nanocrystals into metallic Pd was faster than that of tetrahedral nanocrystals.