Analysis of a grating metal structure with broad back-scatteringfield pattern for applications in vehicle collision avoidancesystem

In this paper, grating metal structures with broad and flat back-scattering field patterns are studied for possible applications in a vehicle collision avoidance system. The two-dimensional TE scattering of a planar grating structure and a curved grating structure are analyzed at a frequency of 77 GHz. For the planar structure, the method of moments and Floquet's theorem are used to solve the induced current and the resultant back-scattering field. Based on the results of the planar structure, the scattering field of the curved grating structure is obtained by using a perturbation method. The influence on the field pattern of the curvature as well as other structure parameters, such as the width and geometry of each period in the grating structure, is investigated     

Growth temperature dependence of low-noise MESFET in molecular-beam epitaxy

The substrate growth temperature dependence of electrical properties for a low-noise MESFET fabricated on MBE-grown material has been demonstrated. The optimum noise figure and its associated gain were attributed to the higher epilayer quality and mobility at a growth temperature of 650°C between temperatures of 550°C and 700°C.     

Femtosecond transform-limited Kerr-lens mode-locked dye lasers

Using SF6 glass plates as intracavity Kerr lenses and double-prism pairs for dispersion compensation, we achieve tunable femtosecond passive mode locking in rhodamine 590 (R6G) and 4-dicyanomethylene-2-methyl-16-p-dimethylaminostyryl-4H-pyran (DCM) dye lasers. The R6G laser produces transform limited 240–500 fs pulses between 577 and 606 nm, and the DCM laser produces 150 fs transform-limited pulses between 650 and 671 nm. We use dilute intracavity saturable-absorber jets to make the mode locking self-starting. Characteristics of the pulses and the stability regions of the lasers agree with general theories of passive mode locking.     

Preparation and evaluation of nickelmesogen for micropacked gas chromatography

The preparation and mesomorphic properties of a substituted bis(dithiolene)nickel complex derived from 4, 4'-dimethoxybenzil are reported. The phase transition temperatures were based on data obtained by polarized light microscopy and differential scanning calorimetry. The mesogenic phase existed over the temperature range from 77 to 175 degrees C. A novel micropacked column (1.5 or 3 m x 1 mm i.d.) prepared from the slurry of bis[1,2-bis(4-n-undecyloxyphenyl)ethane-1,2-dithiolene] nickel(II) (5%, w/w), coated on Chromosorb W was applied for the separation of dialkyl sulfides. The non-linearity (discontinuity) of Van't Hoff plots suggests that the liquid crystal property existed even in the coated phase. Factors affecting the retention and the sample selectivity on the prepared column were examined by using a flame photometric detector (FPD). The separation might be based on the mechanism of ligand exchange, shape selectivity and polarity interaction besides the vapor pressure. LOD for the determination of dialkyl sulfides was below 1 ng for most of the analytes.     

辐照聚甲醛聚合机理、结构与形态的研究——Ⅱ.三聚甲醛单晶辐照引发固相聚合产物的亚微观结构

三聚甲醛单晶经Co_(60)γ射线辐照可以得到一种结晶度很高的聚三聚甲醛。在辐照聚合制得的聚三聚甲醛的迴转图上,除出现普通聚甲醛的衍射点外,还存在着一些新的衍射斑点。 聚三聚甲醛沿着原来三聚甲醛的c轴可以劈成纤维,在迴转图中新的衍射斑点,当样品加温处理后会逐渐消失。 比较聚甲醛与三聚甲醛分子所占的空间,我们认为:聚甲醛确有四种不同取向的晶区,它们联结在一起形成许多曲棍状的微晶。     

Oxidative coupling of methane over Na-Mn-W/SiO2 catalyst at higher pressure

Na-Mn-W/SiO₂ catalysts were prepared and their catalytic performance for oxidative coupling of methane (OCM) was evaluated in a stainless-steel microreactor at elevated pressure. The results show that a CH₄ conversion of 15.1% with a C₂₊ selectivity of 71.8% was obtained under 750^oC, 1.0×10⁵h^-1 GHSV, CH₄/O₂ ratio of 8 and 1.0 MPa. Moreover, 17.3% CH₄ conversion with 51.6% C₂ selectivity and 23.6% C₃-C₄ selectivity was obtained under 750^oC, 2.0×10⁵h^-1 GHSV, CH₄/O₂ ratio of 8 and 1.0 MPa.     

Dinuclear iron(II)-cyanocarbonyl complexes linked by two/three bridging ethylthiolates: relevance to the active site of [Fe] hydrogenases

Dinuclear iron(II)-cyanocarbonyl complex [PPN](2)[Fe(CN)(2)(CO)(2)(mu-SEt)](2) (1) was prepared by the reaction of [PPN][FeBr(CN)(2)(CO)(3)] and [Na][SEt] in THF at ambient temperature. Reaction of complex 1 with [PPN][SEt] produced the triply thiolate-bridged dinuclear Fe(II) complex [PPN][(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)] (2) with the torsion angle of two CN(-) groups (C(5)N(2) and C(3)N(1)) being 126.9 degrees. The extrusion of two sigma-donor CN(-) ligands from Fe(II)Fe(II) centers of complex 1 as a result of the reaction of complex 1 and [PPN][SEt] reflects the electron-rich character of the dinuclear iron(II) when ligated by the third bridging ethylthiolate. The Fe-S distances (2.338(2) and 2.320(3) A for complexes 1 and 2, respectively) do not change significantly, but the Fe(II)-Fe(II) distance contracts from 3.505 A in complex 1 to 3.073 A in complex 2. The considerably longer Fe(II)-Fe(II) distance of 3.073 A in complex 2, compared to the reported Fe-Fe distances of 2.6/2.62 A in DdHase and CpHase, was attributed to the presence of the third bridging ethylthiolate, instead of pi-accepting CO-bridged ligand as observed in [Fe] hydrogenases. Additionally, in a compound of unusual composition ([Na.(5)/(2)H(2)O][(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)])(n)((1)/(2)O(Et)(2))(n) (3), the Na(+) cations and H(2)O molecules combining with dinuclear [(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)](-) anions create a polymeric framework wherein two CN(-) ligands are coordinated via CN(-)-Na(+)/CN(-)-(Na(+))(2) linkages, respectively.