Enhancement of the imprinting effect in cholesterol-imprinted microporous silica

A sol-gel method has been used to fabricate a cholesterol MIP for application in polar solutions. In this study, (cholesteryl propylcarbamate)triethoxysilane and tetraethyl orthosilicate were used as the hydrophobic monomer and crosslinker, respectively. The MIP had a larger pore volume when formation of the polymer was catalyzed at a higher pH than when it was formed at lower pH values, with the pore diameters being 3.5 nm and 2 nm, respectively for materials formed at high and low pH values. Both of these pore volumes were greater than those found for the respective control polymers formed without template. However, only the polymers formed at low pH values showed an imprinting effect. Compared with other methods explored, the sol-gel procedure gave only a small amount of non-specific binding for both the MIP and NIP when synthesized at low pH values. The largest imprinting-induced promotion of binding (IPB) value of the MIP (13 650%) was obtained with [HCl] = 0.01 M in the sol-gel solution. The MIP showed high selectivity towards cholesterol in comparison with other steroid hormones, and also to a lesser extent recognized vitamin D3 in methanol solution containing 5 vol.% water.     

Certain asymptotic expansions for laguerre polynomials and Charlier polynomials

Here proposed are certain asympotic expansion formulas for L _n ^(∞-1) (λz) and C _n ^(∞) (λz) in which 0<w=0(λ) and C_n/(^w)(λz), z being a complex number. Also presented are certain estimates for the remainders (error bounds) of the asymptotic expansions within the regions D₁(-∞<R_ez<=1/2(ω/λ) and D₂(1/2(ω/λ)<=Re_z<∞), respectively. Supported by NSERC (Canada) and also by the National Natural Science Foundation of China.     

The base current degradation of poly-emitter BJTs under AC stress

A simple model for the analysis of the ac stress effect in poly-emitter bipolar transistors is presented. Apart from the reverse-bias induced hot-carrier effects, the forward-bias recovery effect is a key factor under ac stress, it obviously suppresses the base current degradation of the device which is caused during the reverse-bias periods. In this work, we derived the relationship between the excess base current and the stress time for different ac stress conditions. This model is verified with experimental results.<>     

Offset dual-disk dielectric resonator antenna of very highpermittivity

An aperture-coupled offset dual-disk dielectric resonator antenna of very high permittivity is investigated experimentally. It is found that the new configuration offers an impedance bandwidth 4.6 times wider than that of the single element. The voltage standing wave ratio, radiation patterns, and antenna gain of the configuration are studied     

Cracking Go

Many of the early computer-chess researchers hailed from the fields of psychology or artificial intelligence and believed that chess programs should mimic human thinking. Specifically, they wanted computers to examine only playing sequences that were meaningful according to some human reasoning process. In computer chess this policy, known as selective search, never really made progress. The reason is that humans are extremely good at recognizing patterns; it is one of the things that we do best. The article focuses on weiqi, an ancient Chinese board game, better known in the West by the Japanese name of Go, whose combinatorial complexity is many orders of magnitude greater than that of chess. Go is played on a board crisscrossed by 19 vertical and 19 horizontal lines whose 361 points of intersection constitute the playing field. The object is to conquer those intersection points.     

Synthesis and light emitting properties of polyacetylenes having pendent fluorene groups

Five novel fluorene‐containing polymers, poly[(9,9‐dimethylfluoren‐2‐yl)acetylene] ( PFA1 ), poly[(1‐pentyl‐2‐(9,9‐dimethylfluoren‐2‐yl)acetylene) ( PFA2 ), poly[1‐decyl‐2‐(9,9‐dimethylfluoren‐2‐yl)acetylene] ( PFA3 ), poly[1‐phenyl‐2‐(9,9‐dimethylfluoren‐2‐yl)acetylene] ( PFA4 ), and poly[1‐(3,4‐difluorophenyl)‐2‐(9,9‐dimethylfluoren‐2‐yl)acetylene] ( PFA5 ) were synthesized by the polymerization of the corresponding fluorene‐substituted acetylenic monomers ( M1–M5), using WCl₆, MoCl_5, and TaCl₅ as catalysts and n‐Bu₄Sn as a cocatalyst. The synthesized polymers were thermally stable and readily soluble in common organic solvents. The degradation temperatures for a 5% weight loss of the polymers were ∼352–503 °C under nitrogen. PFA1–PFA5 show emission peaks from 402 to 590 nm. Besides, their electroluminescent properties were studied in heterostructure light‐emitting diodes (LEDs), using PFA2–PFA5 as an emitting layer. The PFA5 device revealed an orange‐red emission peak at 602 nm with a maximum luminescence of 923 cd/m² at 8 V. A device with the ITO/PEDOT/ a mixture of PFA2 (98 wt %) and PFA5 (2 wt %)/Ca/Al showed near white emission. Its maximum luminance and current efficiency are 450 cd/m² at 15 V and 1.3 cd/A, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 519–531, 2006     

Highly substituted poly(2,3‐diphenyl‐1,4‐phenylenevinylene) derivatives having bulky phenyl and fluorenyl pendant groups: Synthesis,characterization, and electro‐optical properties

Two series of poly(2,3‐diphenyl‐1,4‐phenylenevinylene) (DP‐PPV) derivatives containing multiple bulky substituents were synthesized. In the first series, two different groups were incorporated on C‐5,6 positions of the phenylene moiety to increase steric hindrance and to obtain blue‐shifted emissions. In the second series, bulky fluorenyl groups with two hexyl chains on the C‐9 position were introduced on two phenyl pendants to increase the solubility as well as steric hindrance to prevent close packing of the main chain. Polymers with high molecular weights and fine‐tuned electro‐optical properties were obtained by controlling the feed ratio of different monomers during polymerization. The maximum photoluminescent emissions of the thin films are located between 384 and 541 nm. Cyclic voltammetric analysis reveals that the band gaps of these light‐emitting materials are in the range from 2.4 to 3.3 eV. A double‐layer EL device with the configuration of ITO/PEDOT/P4/Ca/Al emitted pure green light with CIE′1931 at (0.24, 0.5). Using copolymer P6 as the emissive layer, the maximum luminescence and current efficiency were both improved when compared with the homopolymer P4. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6738–6749, 2006     

Study of ferromagnetism–superconductivity interactions in Co/Nb multilayers

We investigate Co/Nb multilayers to explore the spontaneous π-phase shift between the superconducting (SC) layers, which is attributed for causing the non-monotonic change of the SC transition temperature (T_c) with the ferromagnetic (FM) layer thickness (t_FM) in several FM/SC multilayered systems. The issue of interfacial roughness is also explored by growing Co/Nb multilayers at various sputtering pressures. Transport measurements show a non-monotonic dependence of T_c on t_FM, and this dependence is insensitive to the structural variation present in the samples, as measured by X-ray scattering.