Reply to comments on “Error rate performance of theprojection code”

The authors reply to the comments by Koppelaar and Tolhuizen (see ibid. vol.46, no.9, p.573, 1998). They state that the optimum choice of the slopes used to perform the encoding process in a projection code always results in maximizing the minimum Hamming distance so that d=2 ^r     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

中国台湾电信市场现状

台湾电信市场的开放大致分四个阶段,从1995年起,陆续开放了移动通信、卫星通信及固定通信等多种业务。固网市场,2001年新世纪资通、台湾固网和力霸宽频电信的加入打破了中华电信的独家垄断,开始形成四强竞争的新局面。移动领域,1997年底6家运营商8张民营执照的发放开始了该领域史无前例的竞争。在2001年1月,台湾大哥大、远致电信、亚太行动宽频、联邦电信和中华电信获得了3G执照,累计竞标金额达488.99亿元(新台币)。     

Pit your wits against young minds!

This column is a place for those bits of contagious mathematics that travel from person to person in the community, because they are so elegant, suprising, or appealing that one has an urge to pass them on. Contributions are most welcome.     

多功能智能流量计研制

本文详细论述了利用单片微计算机构成的多功能、多用途流量计量与自动控制系统的研制设计，给出了系统硬件原理框图与软件结构框图。该仪器适用范围较广，具有广阔的应用前景。     

激光干涉环圆心位置测定技术及应用

本文利用在平面内绕定轴旋转的线阵ＣＣＤ及微机系统自动测定激光干涉环圆心位置及应用于激光外径千分尺平行度检查仪平行度检查结果的自动数字化输出。     

钙矾石膨胀机理的SEM研究

本文利用扫描电镜观察了在具有不同矿物组成的系统中生成的钙矾石的形成与膨胀机理。发现能够产生膨胀的钙矾石是由局部化学反应所生成；它们在未水化的铝酸盐矿物表面原地结晶，呈放射状生长。通过溶解，沉淀生成的钙矾石不能凝结，没有膨胀性。     

氟碳铈矿／直氟碳钙铈矿混层结构中新规则混层矿物的超微结构研究

用电子衍射和晶格像技术研究了钙稀土氟碳酸盐矿物中的氟碳铈矿（Ｂ）／直氟碳钙铈矿（Ｓ）混层结构，发现并确定了Ｂ＿４Ｓ＿４、Ｂ＿８Ｓ＿６、Ｂ＿１Ｓ＿６、Ｂ＿７Ｓ＿４和Ｂ＿２Ｓ＿１５种新规则混层矿物的对称性、晶胞参数及理论晶体化学式。根据所获得的高分辨晶格像真实而直观地揭示出该类Ｂ＿ｍＳ＿ｎ（ｍ＞ｎ）型新规则混层矿物的长周期有序堆垛结构特征及变化规律。