Identification,characterization and evolution of non-local quasi-Lagrangian structures in turbulence

The recent progress on non-local Lagrangian and quasi-Lagrangian structures in turbulence is reviewed. The quasi-Lagrangian structures, e.g., vortex surfaces in vis-cous flow, gas-liquid interfaces in multi-phase flow, and flame fronts in premixed combustion, can show essential Lagrangian following properties, but they are able to have topological changes in the temporal evolution. In addition, they can represent or influence the turbulent flow field. The challenges for the investigation of the non-local structures include their identification, characterization, and evolution. The improving understanding of the quasi-Lagrangian struc-tures is expected to be helpful to elucidate crucial dynamics and develop structure-based predictive models in turbulence.     

长玻纤母料增强聚丙烯研究

长玻纤增强聚丙烯复合材料被称为热塑性玻璃钢,由于具有较好的力学性能、成型工艺容易控制、易回收利用等特点,已经成为传统玻璃钢的替代产品。本文以聚丙烯作为基体,长玻纤母料作为增强相,加入相容剂以及其它助剂,制备可回收利用、满足环保要求的绿色复合材料,并对其拉伸、弯曲性能进行测试,进而得出长玻纤母料对聚丙烯的增强作用。研究结果表明:长玻纤母料与聚丙烯具有很好的相容性,能够错落有致地分布于聚丙烯基体中,达到很好的增强效果。     

Ignition and burning behaviors of automobile oil in engine compartment

Accidental leakage of automobile oils is of great inclination to initiate pool fires in engine compartment, with threats to induce the flashover of other components and flame penetration into the passenger compartment. This paper presents experimental results of the ignition and burning behaviors of a kind of automobile oils (automatic transmission oil) using a cone calorimeter. Measurements of oil temperature, ignition time, mass loss and heat release rate are performed at different external heat fluxes and initial fuel depths. The comparison between experimental and numerical oil temperature evolutions shows that the variations of the ignition time at different experimental conditions depend on the heat dissipation process inside the liquid phase. The steady mass burning rate is nearly independent of initial fuel depth and has a linear relation with external heat fluxes. In addition, the results indicate an increase in peak heat release rate by a large margin initially, followed by a relatively small margin under thicker initial fuel depths, while its variations are proportional to external heat fluxes. Correlations are also developed to determine the peak heat release rate as a function of the initial fuel depth.

     

Conjugated polymer‐functionalized graphite oxide sheets thin films for enhanced photovoltaic properties of polymer solar cells

In this study, the maleimide‐thiophene copolymer‐functionalized graphite oxide sheets (PTM21‐GOS) and carbon nanotubes (PTM21‐CNT) were developed for polymer solar cell (PSC) applications. The grafting of PTM21‐OH onto the CNT and GO sheets was confirmed using FTIR spectroscopy. PTM21‐CNT and PTM21‐GOS exhibited excellent dispersal behavior in organic solvents. Better thermal stability was observed for PTM21‐CNT and PTM21‐GOS as compared with that for PTM21‐OH. In addition, the optical band gaps of PTM21‐GOS and PTM21‐CNT were lower than that of PTM21‐OH. We incorporated PTM21‐GOS and PTM21‐CNT individually into poly(3‐hexylthiophene) (P3HT)/[6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) blends for use as photoconversion layers of PSCs. Good distributional homogeneity was observed for PTM21‐GOS or PTM21‐CNT in the P3HT/PCBM blend film. The UV–vis absorption peaks of the blend films red‐shifted slightly upon increasing the content of PTM21‐GOS or PTM21‐CNT. The band gap energies and LUMO/HOMO energy levels of the P3HT/PTM21‐GOS and P3HT/PTM21‐CNT blend films were slightly lower than those of the P3HT film. The conjugated polymer‐functionalized PTM21‐GOS and PTM21‐CNT behaved as efficient electron acceptors and as charge‐transport assisters when incorporated into the photoactive layers of the PSCs. PV performance of the PSCs was enhanced after incorporating PTM21‐GOS or PTM21‐CNT in the P3HT/PCBM blend. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013