Photoluminescence characteristics of ZnTiO3: Bi nanocrystals

The photoluminescence properties of the Bi³⁺ in sol-gel derived ZnTiO₃ nanocrystals have been investigated. An ultra-violet emission at 360 nm and a visible emission band at 506 nm have been observed, originating from two kinds of emission centers. The former is ascribed to the ³P₁-¹S₀ transition of Bi³⁺ and the latter to the recombination of the electrons with the photo-generated holes trapped in the zinc vacancies. In all cases the latter contribution is predominant.     

The Characterisitic of Proton-Exchanged LiNbO3 Waveguide Formed by Different Proton Source

Benzoic acid as a source of proton is widely used in the technology of manufacture of proton exchanged ( PE) waveguide .But the diffusing speed of proton is too fast to make the waveguide stable in the pure benzoic acid. The characteristic of waveguide is improved with mixture of benzoic acid and lithium benzoate .     

针对混合应用业务的ARQ改进方案

在高速无线通信中,自动请求重传(ARQ)是链路层不可缺少的技术,它通过重传向上层屏蔽无线链路上包的丢失。随着无线网络的发展,无线传输速率不断提高,应用的业务类型也越来越广泛。目前,众多ARQ技术的研究都集中在如何提高该技术的确认效率,以适应更高的传输速率,但鲜有研究着手于如何使ARQ能够更好地应用于混合业务环境。针对混合业务环境下的ARQ改进提出了2种方案,并给出其中1种在实际应用中的改善效果。     

Narrow-band interference rejection in DS/CDMA systems using adaptive (QRD-LSL)-based nonlinear ACM interpolators

An Mth order adaptive lattice filter automatically generates all M of the outputs that would be provided by M separate transversal filters. This feature may effectively suppress narrow-band interference (NBI) of either unknown or time-varying bandwidth (or number of frequency bands) in direct-sequence code-division multiple access systems for which the order of the interference rejection filter that achieves the optimal performance is unknown or constantly changing. Moreover, a lattice filter may significantly outperform its transversal counterpart in complex jamming environments in which the adaptive lattice filter must suppress multiple jammers, since each stage of a lattice filter adapts to suppress an orthogonal component of the NBI. The paper develops a computationally efficient and numerically stable adaptive QR-decomposition-based least squares lattice (QRD-LSL)-based nonlinear approximate conditional mean interpolator to suppress NBI effectively. Simulation results demonstrate that both the signal-to-noise ratio improvement and the convergence rate achieved by the proposed interpolators outperform those of other existing prediction-based techniques.     

离子束混合工艺对材料抗蚀性能的影响

本文介绍了离子束混合工艺方法。与直接注入相比较,离子束混合所使用的设备造价低1/4—1/2,而生产效率可提高1—2个数量级,因而使生产成本大幅度降低,这无疑对离子束工艺的实际应用将产生巨大的促进作用。 通过对轴承材料(GCr15和Cr4Mo4V)经Cr、N、Ta不同元素的混合处理后,在0.5M H_2SO_4和0.1M NaCl的缓冲溶液中的阳极极化曲线表明经混合处理后的两种材料试样,其抗蚀能力和抗点蚀能力均大大提高,这与直接注入的试样效果是一致的。 通过俄歇谱仪和透射电镜的分析结果表明混合是成功的,且在一定的条件下,形成非晶组织。 本文的结论是,无论是离子的直接注入还是离子束混合,对提高轴承材料的抗腐蚀性能都是有效的方法,特别是离子束混合技术具有更大的应用前景。     

Excitons in coupled quantum dots

Properties of excitons in vertically coupled GaAs/AlGaAs quantum dots were investigated using the variational method within the envelope function and effective mass approximations. It was found that when the thickness of the spacer layer becomes less than about one exciton Bohr radius, both the exciton binding energy and the fundamental optical transition energy are reduced compared to those in isolated quantum dots. This is a result of increased space extension of exciton due to the penetration of carrier wave functions into the spacer layer and corresponding reduction in confinement energy which dominates over the Coulomb interaction between the electron and the hole.     

Covalent functionalization of multi-walled carbon nanotubes by lipase

Lipase from Candida rugosa was covalently anchored onto acid-treated multi-walled carbon nanotubes (MWNTs) through a self-catalytic mechanism. A variety of characterization techniques including FTIR, Raman spectroscopy, and XPS were employed to demonstrate the formation of the ester linkage between lipase and MWNTs. The MWNTs-lipase biocomposites showed significantly increased solubility in some common-used organic solvents, such as THF, DMF and chloroform. This study may offer a novel and facile route for covalent modification of carbon nanotubes, and expand the potential utilization of both lipases and MWNTs in the fields of biocatalyst and biosensor.     

GaN材料系列的研究进展

ＧａＮ及其合金作为第三代半导体材料具有一系列优异的物理和化学性质，在光电子器件，高温大功率电子器件及高频微波器件应用方面具有广阔的前景，已成为当前高科技领域的研究重点，论述了这种材料的研究历史与发展现状，物理与化学性质，薄膜的生长方法及在光学电子和微电子器件应用于方面的研究进展。     

混合集成电路激光功能调值技术

本文提出了激光功能微调技术在高精度混合集成电路上的应用，讨论了关键技术问题，并以实例具体说明。该技术的应用为研制高精度混合集成电路开辟了新途径。     

Ga1-xInxAs/InAsyP1-y/InP异质结的MOCVD生长及表征

Ga1-xInxAs(x>0.53)材料是未来长距离低损耗光纤通信的理想光源材料和探测器材料之一.我们采用水平常压MOCVD系统,在InP衬底上成功地生长了Ga1-xInxAs(x>0.53)/InAsyP1-y/Inp异质结材料.其中InAs1-yPy为组份阶梯变化的多层结构.由样品的(400)面X光衍射结果测定了各层组份.由二次离子质谱(SIMS)得到了样品剖面组份变化结果,证明InAs1-yPy层组份为阶梯状变化的.通过对光致发光结果和X光衍射结果比较,可以看到,InAsyP1-y层通过位错和弹性畸变二种方式来释放或积累Ga1-xInxAs与InP间的失配应力,从而减少了Ga1-xInxAs中的失配位错.有效地改善了Ga1-xInxAs的质量.已获得了x高达0.94表面光亮的Ga1-xInxAs/InAs1-yPy/InP异质结材料.