Wavelength-switchable fiber laser using acoustic waves

We report a wavelength-switchable fiber ring laser that includes a Bragg grating-based acoustooptic superlattice modulator. Wavelength switching of the laser emission is achieved by controlling the peak reflectivity of the different reflection bands that appear on both sides of the Bragg wavelength when a longitudinal acoustic wave propagates along the grating.     

Photoconductive Terahertz antenna with radial symmetry

It has been demonstrated recently that it is possible to guide broadband Terahertz pulses utilising a novel coaxial waveguide. This technique is hindered by the difficulty in exciting the radially polarised fundamental mode of the waveguide. To optimise mode matching, a novel radially symmetric photoconductive Terahertz antenna is proposed. Using finite element method simulations and analytical calculations, it is shown that this antenna can generate the desired radial polarisation.     

Investigation of multicomponent fluoride optical materials in the UV spectral region: I. Single crystals of Ca1−x R xF2+x (R = Sc, Y, La, Yb, Lu) solid solutions

Crystalline materials that are transparent in the vacuum UV spectral region and currently used have been reviewed. Transmission of crystals of solid solutions with the fluorite structure Ca_1?x R _xF_2+x (R = Sc, Y, La, Yb, Lu) in the UV and vacuum UV spectral regions has been investigated. It is shown that application of different methods of purification of fluorides from some impurities can significantly improve the optical quality of fluoride multicomponent crystals in the short-wavelength spectral region.     

Integrating design and measurement

At the 2004 International Instrumentation and Measurement Conference in Italy, a number of us were discussing the growing importance of system-level design and the implications for simulation and measurement technologies. It was puzzling to us that technology continues to increase in complexity, yet the last two decades have seen the design world of simulation and modeling diverge from the world of measurement and testing. Today's systems, whether they are commercial products or scientific experiments, require a convergence of technologies that makes performance measurement and validation not only more critical but also more prone to error. In the discussions a point that came up repeatedly was the value of bringing the design and test communities closer together, and it was suggested that it was timely to highlight this issue. With that in mind, this note aims to stimulate community discussion by first examining some benefits and challenges of integration and then outlining possible directions for collaboration between the simulation and measurement communities.     

Nanolayered lightweight flexible shields with multidirectional optical transparency

New nanolayered coatings are designed and deposited on flexible plastic substrate having the thickness of 100 /spl mu/m, in order to realize lightweight ultrathin transparent shielding foils. The structure of the coating is optimized considering three figures of merit: the average transmittance in the visible range for normal incidence, the normalized average transmittance for oblique incidence at 550 nm, and the transmittance quality factor. The nanotechnology exploited for the deposition of the transparent metals is the dual ion beam sputtering. Tests of durability, optical transmission, and shielding effectiveness demonstrate that the film has a high adhesion under mechanical solicitation, high resistance against aging, peak transmittance in the visible range higher than 70%, omnidirectional properties in the range 0/spl deg/-60/spl deg/, and shielding effectiveness of 40 dB up to 6 GHz.     

The U.S. role in global internet governance

Who should control the Internet? A dozen years after the Internet became a mass medium, this issue has continued to grow in urgency, becoming white hot in fall 2005. At the September 2005 preparatory meeting for the UN World Summit on the Information Society (WSIS), a coalition of countries criticized the United States' unilateral control of the Internet's domain name system (DNS) and proposed the establishment of a multinational Council to supervise it. This proposal emerged from the Final Report of the UN Working Group on Internet Governance. Researchers from the Internet Governance Project, a university-based consortium for policy analysis, have concluded that the United States should internationalize governance of the Internet, but in a way that avoids intrusive, centralized control.     

A 300-MHz 25-/spl mu/A/Mb-leakage on-chip SRAM module featuring process-variation immunity and low-leakage-active mode for mobile-phone application processor

An on-chip 1-Mb SRAM suitable for embedding in the application processor used in mobile cellular phones was developed. This SRAM supports three operating modes - high-speed active mode, low-leakage low-speed active mode, and standby mode - and uses a subdivisional power-line control (SPC) scheme. The combination of three operating modes and the SPC scheme realizes low-power operation under actual usage conditions. It operates at 300 MHz, with leakage of 25 /spl mu/A/Mb in standby mode, and 50 /spl mu/A/Mb at the low-leakage active mode. This SRAM also uses a self-bias write scheme that decreases of minimum operating voltage by about 100 mV.     

Rearrangeable nonblocking SOI waveguide thermooptic 4/spl times/4 switch matrix with low insertion loss and fast response

A rearrangeable nonblocking 4/spl times/4 thermooptic silicon-on-insulator waveguide switch matrix at 1.55-/spl mu/m integrated spot size converters is designed and fabricated for the first time. The insertion losses and polarization-dependent losses of the four channels are less than 10 and 0.8 dB, respectively. The extinction ratios are larger than 20 dB. The response times are 4.6 /spl mu/s for rising edge and 1.9 /spl mu/s for falling edge.     

Overcoming the challenges in deploying user provisioning/identity access management backbone

This paper sets out to share BT's leadership and experience by determining the identity management opportunities and issues, then document the lessons learnt in previous deployments and recommend strategies for all types and sizes of organisation. Today's ICT environment has created a mixed approach to access management across sectors. Browser-based any time, anywhere, anyone access, coupled with the business need to access more systems and services across a changing infrastructure of distributed platforms and networked services, has changed the administrative landscape. Enterprises are being forced to add administrative support staff or invest in technology-driven process change. At the same time, users are undergoing significant change, creating new expectations in service quality. Moreover, regulatory bodies are demanding confirmation that processes granting access are controlled and documented. In this world of increasing demands, complexity and expectation, the service management tools, techniques and options available to improve user access management are as varied and numerous as the issues faced by management in their deployment. Identity management is widely heralded as an opportunity to improve the end user experience, reduce costs, improve security and deliver regulatory compliance — but is often misunderstood. Projects regularly fail to achieve the expected benefits. These failures are the result of expectations being inappropriately set, deployment of solutions turning out to be more complex or taking longer than expected, and/or products selected before required functionality has been determined. For the larger more mature organisations, or those organisations that are the amalgamation of mergers and acquisitions, the dilemma is where to start and what approach to take.     

Simulation of viscous water column collapse using adapting hierarchical grids

An adaptive hierarchical grid‐based method for predicting complex free surface flows is used to simulate collapse of a water column. Adapting quadtree grids are combined with a high‐resolution interface‐capturing approach and pressure‐based coupling of the Navier–Stokes equations. The Navier–Stokes flow solution scheme is verified for simulation of flow in a lid‐driven cavity at Re=1000. Two approaches to the coupling of the Navier–Stokes equations are investigated as are alternative face velocity and hanging node interpolations. Collapse of a water column as well as collapse of a water column and its subsequent interaction with an obstacle are simulated. The calculations are made on uniform and adapting quadtree grids, and the accuracy of the quadtree calculations is shown to be the same as those made on the equivalent uniform grids. Results are in excellent agreement with experimental and other numerical data. A sharp interface is maintained at the free surface. The new adapting quadtree‐based method achieves a considerable saving in the size of the computational grid and CPU time in comparison with calculations made on equivalent uniform grids. Copyright © 2005 John Wiley & Sons, Ltd.