Infrared-optical properties of vapour-deposited metal films

Spectroscopic infrared ellipsometry was applied to determine the optical constants of thin metal layers deposited on dielectric substrates such as glass or CaF(2). The layers were produced by evaporating gold or silver in a vacuum, and the coverage, that is the deposited mass per area, was chosen in the range 80-1200 mg m(-2) for gold, which refers to thicknesses in the lower nanometer range; in the case of the specifically lighter silver, about half the coverage was applied. At low coverage a metal island structure is obtained, which gives rise to surface-enhanced infrared absorption (SEIRA). Depending on the coverage, the deposited films exhibit either dielectric or metallic optical properties. Atomic force microscopy and conductivity measurements complement the spectroscopic observation.     

Adsorption, desorption and activities of acid phosphatase on various colloidal particles from an Ultisol

Adsorption, desorption and activity of acid phosphatase on various soil colloidal particles and pure clay minerals were studied. Higher adsorption amounts and low percentage of desorption of acid phosphatase were found on fine soil clays (<0.2 μm). Electrostatic force and ligand exchange are the major driving forces that are involved in the adsorption of enzymes on soil clays. More enzyme molecules were adsorbed on soil clays in the presence of organic components. However, enzymes on organic clays were more easily released. One-third of the enzyme on goethite was adsorbed via ligand exchange process. Some other interactions, such as van der Waals force, hydrophobic force and hydrogen bonding may be more important in the adsorption of enzyme on kaolinite and the enzyme in this system cannot be easily removed. Coarse clays (0.2–2 μm) and inorganic soil clays had higher affinities for enzyme molecules than fine clays and organic clays, respectively. The activity of enzyme bound on soil clays was inhibited and the thermal stability was increased in the presence of organic matter. Data obtained in this study are helpful for a better understanding of the interactions of enzymes with inorganic and organic constituents in soil and associated environments.     

Reinvestigation of CS2 dissociation at 193 nm by means of product state-selective vacuum ultraviolet laser ionization and velocity imaging

A branching ratio of 1.6 +/- 0.3 for S(3P)/S(1D) is obtained for the dissociation of CS2 with very low fluence 193 nm laser (less than 2 mJ/cm2), in which the S(3P) and S(1D) have been state-selectively ionized using VUV lasers at different wavelengths. The anisotropy parameters betamax(3P) = 0.8 and betamax(1D) = 1.9 indicate that these channels are preferentially populated at different geometries and the lifetime is very short.     

Simple synthesis of aminoquinoline/ethylaniline copolymer semiconducting nanoparticles

Pure copolymer nanoparticles from 8-aminoquinoline (AQ) and 2-ethylaniline (EA) were easily synthesized by a chemically oxidative polymerization in three different aqueous media. The potential and temperature of polymerization solution were used to successfully follow the polymerization progress. The molecular and morphological structures of the resulting AQ/EA copolymer particles were systematically characterized by IR, UV/Vis, NMR, gel permeation chromatography, laser particle-size analysis, atomic force and transmission electron microscopy. The oxidation potential of the monomers as well as the polymerization yield, structure, and properties of the particles were found to significantly depend on AQ/EA ratio, polymerization temperature and medium. It is surprisingly found that AQ homopolymerization and AQ/EA (50:50) copolymerization at 5 degrees C in HCl simply afford nano-ellipsoids with the major/minor axis diameters of 24/14 nm and 80/67 nm, respectively. A simple method of synthesizing semiconducting pure nanoparticles by introducing the AQ units with positively charged quaternary ammonium groups but in the absence of adscititious stabilizer or sulfonic substituent on the monomers is established first. Both the molecular weight and bulk electroconductivity of the copolymers exhibit a maximum at AQ content of 10 mol %. The solubility and film formability of the copolymers are good in highly polar solvents and reach the optimal at the AQ content of 20 and 10 mol %, respectively.     

5′-鸟苷酸与茜素红S的反应及其在分析化学中的作用

采用UVVis光谱法研究了茜素红S(ARS)与5′鸟苷酸(5′GMP)在pH4.80的弱酸性缓冲溶液中生成络合物的结合反应。与试剂比较,络合物的最大吸收峰红移92nm,测得络合物和表观摩尔吸光系数为ε=1.3×104L·mol-1·cm-1;最大结合数n=10;浓度线性范围0.2～16mg/L;检出限为6.1×10-8mol/L。研究了ARS与5′GMP是分子间作用力的结合反应,并对时间、温度、离子强度对结合反应的影响,以及无机物、生物物质对反应体系的干扰情况进行了初步研究。     

弱碱性阴离子交换树脂分离1,6—二磷酸果糖的研究

采用弱碱性阴离子交换树脂HJ-30对发酵液中1，6-二磷酸果糖的分离进行了研究。详细地研究了树脂的吸附和脱附性能。实验结果表明，HJ-30树脂对FDP的吸附量达0．28gFDP／g湿树脂，以0．05mol／LNaCl洗脱光机磷和1mol／LNaCl洗脱1，6-二磷酸果糖，产品的收率和纯度分别为92％和99．4％。     

Autocatalytic modification of the prosthetic heme of horseradish but not lactoperoxidase by thiocyanate oxidation products. A role for heme-protein covalent cross-linking

The mammalian peroxidases eosinophil peroxidase, lactoperoxidase (LPO), and myeloperoxidase oxidize thiocyanate to the antimicrobial agents hypothiocyanous acid (HOSCN) and (SCN)2 and are part of a defense system that protects the host from infections. Horseradish peroxidase (HRP), a plant enzyme, also oxidizes thiocyanate. We report here that the prosthetic heme vinyl groups of HRP react with the catalytically generated HOSCN and (SCN)2 to form at least nine vinyl-modified heme adducts. Mass spectrometry combined with analysis of the equivalent reactions of HRP reconstituted with 2- or 4-cyclopropylheme, or mesoheme-d4, shows that all of the prosthetic heme modifications result from addition of oxidized thiocyanate to the heme vinyl groups. No delta-meso-substitution of the heme was observed, in contrast to what is observed with radical agents. Model studies show that incubation of either HRP with preformed HOSCN or a solution of heme with preformed (SCN)2 gives rise to the same products obtained in the HRP-catalyzed reaction. Model studies also demonstrate that the SCN* radical, if formed, should add to a meso-carbon. These findings implicate an electrophilic addition mechanism. In contrast, oxidation by LPO of thiocyanate, the normal substrate of this enzyme, does not result in heme modification. In view of the demonstrated intrinsic reactivity of the heme group, LPO must actively suppress heme modification. As the key difference between LPO (and other mammalian peroxidases) and HRP is the presence of two covalent ester links between the heme and the protein, we propose that these links contribute to steric protection of the adjacent heme vinyl groups.     

Recent progress in two-photon small molecule fluorescent probes for enzymes

This review aims to provide a summary of the progress in TP small molecule fluorescent probes for enzymes in recent years and displays the main fluorescent mechanisms that have been applied to design probes.     

带功能基的全氟烷基乙烯基醚的研究——3、四氟乙烯与-7,7-二氯-3-氧杂全氟庚烯-1的共聚反应及共聚物的转化

 研究了二个新的全氟烷基乙烯基醚7,7-二氯-3-氧杂全氟庚烯-1(M_0)和10,10-二氯-3,6-二氧杂全氟5-甲基癸烯-1(M₁)-与四氟乙烯(TFE)的共聚反应,聚合物的性质,并测定了TFE-M₀竞聚率。竞聚率的测定证明M₀较其它已报道的全氟烷基乙烯基醚的聚合活性都大。TFE-M₀共聚物通过化学反应可转化成相应的全氟羧酸甲酯树脂。     

Hydrophilic polymer membranes containing carboxylic groups—I. Acrylic acid—methyl methacrylate—glycidyl methacrylate copolymers

Copolymers of acrylic acid, methyl methacrylate and glycidyl methacrylate have been synthesized and converted into cross-linked hydrophilic membranes by successive treatments with heat, alkali solution and acidic solution. The copolymerization was carried out in solution using tetrahydrofuran and p-dioxane as solvents. The polymer was obtained as a clear viscous solution at yields of approximately 95%. The polymerization was stopped before gelation took place. This gelation resulted from the reaction of epoxy and carboxylic groups of the polymeric chain. The polymerization time ranged from 3.5 to 7 hr depending on the content of the glycidyl methacrylate in the feed. The monomer mixture consisted of 25–45 mol% of acrylic acid, 40–70 mol% of methyl methacrylate and 2.5–15 mol% of glycīdyl methacrylate. With increasing content of acrylic acid, the membranes became soft and elastic; with decreasing content, they became brittle and hydrophobic. The swelling of the cured polymeric film increased with increase in the acrylic acid content of the monomer mixture and decreased with increasing glycidyl methacrylate content. Dialysis runs were conducted with sodium chloride, urea and a series of ethylene glycols with molecular weights up to 600. The permeability coefficients through the membranes for the ethylene glycols were similar to those through a commercial cellulose membrane (Cuprophane). The permeability proportional to $\text{(permeant molecular wt)}{}^{\mathrm{<mtext>?</mtext><mtext>1</mtext><mtext>2</mtext>}}$. The membranes showed very low permeabilities to sodium chloride compared with those of commercial nonionic membranes. This appears to be due to the ionic exclusion mechanisms expected for ion exchange membranes.