Long-lasting near-infrared persistent luminescence from β-Ga2O3:Cr nanowire assemblies

Near-infrared (NIR) persistent luminescent β-Ga₂O₃:Cr³⁺ nanowire assemblies were synthesized by a hydrothermal process followed by calcination. The phosphor exhibits more than 4 h afterglow in the wavelength range of 650-850 nm after ceasing the ultraviolet light (280-360 nm) irradiation. The trap structure and persistent luminescence mechanism were revealed by thermoluminescence measurement. The β-Ga₂O₃:Cr³⁺ nanowire assemblies may find applications as identification taggants in security and optical probes in bio-imaging.     

Tuning visible light generation based on multi-channel quasi-periodically poled LiTaO3

We demonstrate broadband tuning visible light generation based on a multi-channel quasi-periodically poled LiTaO₃ crystal, in which a quasi-phase matched optical parametric generation process and a quasi-phase matched sum-frequency mixing process were achieved simultaneously. The conversion characters on spectrum and energy were studied by using a nanosecond pulse laser at 1.064 μm as pump light. We could tune the visible light over ~ 26 nm by means of changing the crystal's channel and temperature. The ratio of the output wavelength variation to that of temperature was ~ 0.07 nm/°C. The single-pass slope efficiency was 6.3% with the maximum output energy of 25 μJ.     

热管冰蓄冷结构设计

从技术角度研究和探讨了热管做为冰蓄冷装置的适用性;对各种热管用金属管材与工质的特性进行了科学比较;从而最终确定了适宜冰蓄冷工作的热管管材、热管工质及其基本尺寸;为热管冰蓄冷装置的深入研究及推广应用,提供了强有力的理论依据。     

可见区分光光度法测量水体色度

针对目前水质色度测量方法的局限性,采用分光光度法测量相关色度学参数,通过色度学参数与国家标准方法的色度值建立数值关系,从而测定水体的色度值.该方法不仅保证测量结果与现行国家标准测量结果一致,而且客观性强,稳定可靠,灵敏度更高,也更准确.克服了目视比色法需要水体与标准溶液色调一致的局限性,可以推广到其他色调的废水色度测量...     

Continuous and pulsed ultrasound-assisted extractions of antioxidants from pomegranate peel

There is a great demand for developing efficient extraction methods in order to reduce extraction time and increase the yield and activity of functional antioxidants. The yields, activities, and extraction kinetics of antioxidants from dry peel of pomegranate marc were studied using ultrasound-assisted extraction in continuous and pulsed modes and the results were compared with conventional extraction (CE) at a temperature of 25±2°C and water/peel ratio of 50/1, w/w. The studied factors were intensity level and treatment time for continuous ultrasound-assisted extraction (CUAE), and intensity level, number of pulse repetition, and pulse duration and interval for pulsed ultrasound-assisted extraction (PUAE). The results showed that all factors significantly affected the antioxidant yield, but only treatment time had a significant effect on the antioxidant activity. Compared to CE, PUAE at intensity level of 59.2 W/cm(2), and the 5 and 5s of pulse duration and interval increased the antioxidant yield by 22% and reduced the extraction time by 87%. Similarly, CUAE at the same intensity level increased the antioxidant yield by 24% and reduced the extraction time by 90%. Since PUAE had 50% energy saving compared to CUAE, we recommend using PUAE for the extraction with antioxidant yield of 14.5% and DPPH scavenging activity of 5.8 g/g. A second-order kinetic model was successfully developed for describing the mechanism of ultrasound-assisted extractions under PUAE and CUAE. This research clearly demonstrated the superiority of PUAE for producing antioxidants from peel of pomegranate marc.     

Parallel synthesis of natural product-like polyhydroxylated pyrrolidine and piperidine alkaloids

The preparation of natural product-like polyhydroxylated pyrrolidine and piperidine alkaloids using a combination of solid– and solution-phase organic synthesis is described. The key intermediates, enantiopure five- or six-membered tri-O-benzyl cyclic nitrones, were efficiently prepared on solid support from accessible chiral furanosides and pyranosides, respectively. The substituent diversity was achieved by a diastereoselective addition of a variety of Grignard reagents to the cyclic nitrones in solution-phase synthesis. All reaction steps and work-up procedures were modified to allow the use of automated equipment. A 36-membered demonstration library with three diversity elements (core, configuration, and substituent) was prepared in good yield and purity.     

TiO<Subscript>2</Subscript> nanotube height effect on the efficiency of dye-sensitized solar cells

Performance of dye-sensitized solar cells (DSSCs) based on TiO₂ nanotubes (NTs) filled with TiO₂ nanoparticles (NPs) was studied as a function of NT height (h). The NT height was varied in the range of 1.5–7.0 μm, while the NT diameter was kept constant at ~80 nm. The studies showed that DSSC efficiency, current density, and fill factor linearly increased with h and ranged in 1.76–6.5%, 3.62–13.2 mA/cm², and 0.66–0.76, respectively, within the h range studied. The electrochemical impedance spectroscopy was also performed to study DSSC electron transport properties. Based on both photovoltaic and electrochemical impedance spectroscopy data, the results were explained as being due to the increased dye loading that led to higher light-harvesting efficiency.     

High power nano-LiMn2Oa cathode materials with high-rate pulse discharge capability for lithium-ion batteries＊

Nano-LiMn2O4 cathode materials with nano-sized particles are synthesized via a citric acid assisted sol-gel route. The structure, the morphology and the electrochemical properties of the nano-LiMn204 are investigated. Compared with the micro-sized LiMn2O4, the nano-LiMn2O4 possesses a high initial capacity （120 mAh/g） at a discharge rate of 0.2 C （29.6 mA/g）. The nano-LiMn2O4 also has a good high-rate discharge capability, retaining 91% of its capacity at a discharge rate of 10 C and 73~ at a discharge rate of 40 C. In particular, the nano-LiMn2O4 shows an excellent high-rate pulse discharge capability. The cut-off voltage at the end of 50-ms pulse discharge with a discharge rate of 80 C is above 3.40 V, and the voltage returns to over 4.10 V after the pulse discharge. These results show that the prepared nano-LiMn2O4 could be a potential cathode material for the power sources with the capability to deliver very high-rate pulse currents.     

Performance of third-order ghost imaging with second-order intensity correlation

The third-order ghost imaging with the second-order intensity correlation is theoretically and experimentally demonstrated.The resolution and visibility of the reconstructed image are discussed,and the relationship between resolution and visibility is analyzed.The theoretical results show that a tradeoff exists between the visibility and resolution of the reconstructed image;the better the image resolution,the worse the image visibility.Numerical simulations are carried out to verify this theory,and a ghost...     

Efficient two-photon sensitized luminescence of europium （Ⅲ） complex based on hypersensitive transitions

Red frequency-upconversion fluorescence emission is observed in europium(Ⅲ) complex with encapsulating polybenzimidazole tripodal ligands, pumped with 930- and 1070-nm picosecond laser pulses. The lumines- cence of transition 5D0 →7F2 (612 nm) is induced by two-photon absorption of hypersensitive transitions 7F0 →5D2 (465 nm) and 7F1 →5D1 (535 nm). Analysis results suggest that the two-photon excitation strength of these hypersensitive transitions is increased dramatically owing to the C3 symmetry of the coordination field.